Re: Inclusion of x86_64 memorize ioapic at bootup patch

[Eric W. Biederman]

yhlu <yhlu.kernel@xxxxxxxxx> writes:

> andi,
>
> In LinuxBIOS, we don't set the MPS 0x467 and the AP still can be started by BSP.
>
> are these really needed for x86_64?
>
>         Dprintk("Setting warm reset code and vector.\n");
>
>         CMOS_WRITE(0xa, 0xf);
>         local_flush_tlb();
>         Dprintk("1.\n");
>         *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4;
>         Dprintk("2.\n");
>         *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf;
>         Dprintk("3.\n");
>
> the STARTUP IPI should work well with MPS v1.4

There are very large x86 machines that a reset is sent to the remote
cpu and thus 0x40:0x67 and 0x40:0x67 becomes relevant.

YH you didn't do something foolish and put a linuxbios table below
0x500 did you?

Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/