Re: [BUG 2.6.15-git5] new alsa power management completly broken

[Takashi Iwai]

At Tue, 10 Jan 2006 09:06:37 +0100,
Patrizio Bassi wrote:
> 
> With 2.6.15: suspend works but on resume mixer volumes are not restored
> (registers not saved), so you need to restart your alsa script.
> boring but working.

The driver didn't support PM at all on 2.6.15.  It worked casually in
your case with a pure luck :)

> with 2.6.15-git5 i saw a new power management part. lt's test it:
> 
> suspending...
> 
> Jan 10 08:44:51 blight kernel: Stopping tasks: ===================|
> Jan 10 08:44:51 blight kernel: Shrinking memory...  ^H-^Hdone (0 pages
> freed)
> Jan 10 08:44:51 blight kernel: pnp: Device 00:0b disabled.
> Jan 10 08:44:51 blight kernel: pnp: Device 00:07 disabled.
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:0b.0 disabled
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:0a.2 disabled
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:0a.1 disabled
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:0a.0 disabled
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:09.0 disabled
> Jan 10 08:44:51 blight kernel: ACPI: PCI interrupt for device
> 0000:00:04.2 disabled
> Jan 10 08:44:51 blight kernel: swsusp: Need to copy 15888 pages
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:04.2[D] ->
> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:09.0[A] ->
> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:09.0[A] ->
> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] ->
> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:0a.1[B] ->
> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:0a.2[C] ->
> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
> Jan 10 08:44:51 blight kernel: usb usb1: root hub lost power or was reset
> Jan 10 08:44:51 blight kernel: ehci_hcd 0000:00:0a.2: USB 2.0 started,
> EHCI 0.95, driver 10 Dec 2004
> Jan 10 08:44:51 blight kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] ->
> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
> Jan 10 08:44:51 blight kernel: codec write timeout, status = 0x660
> Jan 10 08:44:51 blight last message repeated 25 times
> 
> 25 times....about half on suspending and about half on restarting.

It's the same symptom as resume.


> now restarting..
> 
> Jan 10 08:44:51 blight kernel: pnp: Device 00:07 activated.
> Jan 10 08:44:51 blight kernel: pnp: Failed to activate device 00:0a.
> Jan 10 08:44:51 blight kernel: pnp: Device 00:0b activated.
> Jan 10 08:44:51 blight kernel: Restarting tasks... done
> 
> device can't play any sound, as before. so i tried the usual solution
> (restart the alsasound script in gentoo)
> 
> Jan 10 08:45:45 blight rc-scripts: WARNING:  you are stopping a boot
> service.
> Jan 10 08:45:47 blight kernel: codec write timeout, status = 0x660
> Jan 10 08:46:33 blight last message repeated 64 times
> Jan 10 08:46:57 blight last message repeated 199 times
> 
> as you can see it flood the syslog with 0x660 errors.
> infact if i try to adjust the volume via alsamixer the volume level
> moves soooo slow (it's flooding syslog)
> 
> so actually power resume is completly broken. the only way is restarting
> the kernel via a reboot (built-in alsa).
> 
> 
> Audio card: Creative Sound Blaster PCI 128
> 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
> 
> Ready to test patches.

The symptom implies that the initialization of codec chip failed
somehow.   Please build the driver as a module and reload it after
resume to check whether it works without reboot.


Takashi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/