[PATCH 4/8] sh: IRQ handler updates.

From: Paul Mundt
Date: Sat Jan 14 2006 - 17:52:27 EST

This moves the various IRQ controller drivers into a new subdirectory,
and also extends the INTC2 IRQ handler to also deal with SH7760 and
SH7780 interrupts, rather than just ST-40.

The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions,
as new ports are expected to be based off of CONFIG_SH_UNKNOWN. Since
there are plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make
sense anymore.

Signed-off-by: Paul Mundt <lethal@xxxxxxxxxxxx>

---

arch/sh/kernel/cpu/Makefile | 9
arch/sh/kernel/cpu/irq/Makefile | 7
arch/sh/kernel/cpu/irq/imask.c | 110 +++++++++++
arch/sh/kernel/cpu/irq/intc2.c | 284 ++++++++++++++++++++++++++++++
arch/sh/kernel/cpu/irq/ipr.c | 206 +++++++++++++++++++++
arch/sh/kernel/cpu/irq/pint.c | 169 +++++++++++++++++
arch/sh/kernel/cpu/irq_imask.c | 116 ------------
arch/sh/kernel/cpu/irq_ipr.c | 339 -----------------------------------
arch/sh/kernel/cpu/sh4/irq_intc2.c | 222 -----------------------
arch/sh/kernel/irq.c | 64 ++----
include/asm-sh/irq-sh73180.h | 16 -
include/asm-sh/irq-sh7780.h | 349 +++++++++++++++++++++++++++++++++++++
include/asm-sh/irq.h | 143 ++++++++-------
13 files changed, 1240 insertions(+), 794 deletions(-)

diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/Makefile sh-2.6.15/arch/sh/kernel/cpu/Makefile
--- linux-2.6.15/arch/sh/kernel/cpu/Makefile 2004-08-14 20:27:37.000000000 +0300
+++ sh-2.6.15/arch/sh/kernel/cpu/Makefile 2006-01-07 22:13:59.118151154 +0200
@@ -2,15 +2,12 @@
# Makefile for the Linux/SuperH CPU-specifc backends.
#

-obj-y := irq_ipr.o irq_imask.o init.o bus.o
+obj-y += irq/ init.o bus.o clock.o

obj-$(CONFIG_CPU_SH2) += sh2/
obj-$(CONFIG_CPU_SH3) += sh3/
obj-$(CONFIG_CPU_SH4) += sh4/

-obj-$(CONFIG_SH_RTC) += rtc.o
+obj-$(CONFIG_SH_RTC) += rtc.o
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
-obj-$(CONFIG_SH_ADC) += adc.o
-
-USE_STANDARD_AS_RULE := true
-
+obj-$(CONFIG_SH_ADC) += adc.o

diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq/Makefile sh-2.6.15/arch/sh/kernel/cpu/irq/Makefile
--- linux-2.6.15/arch/sh/kernel/cpu/irq/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq/Makefile 2006-01-07 22:13:59.123150761 +0200
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
+#
+obj-y += ipr.o imask.o
+
+obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
+obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq/imask.c sh-2.6.15/arch/sh/kernel/cpu/irq/imask.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq/imask.c 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq/imask.c 2006-01-07 22:13:59.127150447 +0200
@@ -0,0 +1,110 @@
+/*
+ * arch/sh/kernel/cpu/irq/imask.c
+ *
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ *
+ * Simple interrupt handling using IMASK of SR register.
+ *
+ */
+/* NOTE: Will not work on level 15 */
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+/* Bitmap of IRQ masked */
+static unsigned long imask_mask = 0x7fff;
+static int interrupt_priority = 0;
+
+static void enable_imask_irq(unsigned int irq);
+static void disable_imask_irq(unsigned int irq);
+static void shutdown_imask_irq(unsigned int irq);
+static void mask_and_ack_imask(unsigned int);
+static void end_imask_irq(unsigned int irq);
+
+#define IMASK_PRIORITY 15
+
+static unsigned int startup_imask_irq(unsigned int irq)
+{
+ /* Nothing to do */
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type imask_irq_type = {
+ .typename = "SR.IMASK",
+ .startup = startup_imask_irq,
+ .shutdown = shutdown_imask_irq,
+ .enable = enable_imask_irq,
+ .disable = disable_imask_irq,
+ .ack = mask_and_ack_imask,
+ .end = end_imask_irq
+};
+
+void static inline set_interrupt_registers(int ip)
+{
+ unsigned long __dummy;
+
+ asm volatile("ldc %2, r6_bank\n\t"
+ "stc sr, %0\n\t"
+ "and #0xf0, %0\n\t"
+ "shlr2 %0\n\t"
+ "cmp/eq #0x3c, %0\n\t"
+ "bt/s 1f ! CLI-ed\n\t"
+ " stc sr, %0\n\t"
+ "and %1, %0\n\t"
+ "or %2, %0\n\t"
+ "ldc %0, sr\n"
+ "1:"
+ : "=&z" (__dummy)
+ : "r" (~0xf0), "r" (ip << 4)
+ : "t");
+}
+
+static void disable_imask_irq(unsigned int irq)
+{
+ clear_bit(irq, &imask_mask);
+ if (interrupt_priority < IMASK_PRIORITY - irq)
+ interrupt_priority = IMASK_PRIORITY - irq;
+
+ set_interrupt_registers(interrupt_priority);
+}
+
+static void enable_imask_irq(unsigned int irq)
+{
+ set_bit(irq, &imask_mask);
+ interrupt_priority = IMASK_PRIORITY - ffz(imask_mask);
+
+ set_interrupt_registers(interrupt_priority);
+}
+
+static void mask_and_ack_imask(unsigned int irq)
+{
+ disable_imask_irq(irq);
+}
+
+static void end_imask_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_imask_irq(irq);
+}
+
+static void shutdown_imask_irq(unsigned int irq)
+{
+ /* Nothing to do */
+}
+
+void make_imask_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &imask_irq_type;
+ enable_irq(irq);
+}
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq/intc2.c sh-2.6.15/arch/sh/kernel/cpu/irq/intc2.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq/intc2.c 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq/intc2.c 2006-01-07 22:13:59.133149975 +0200
@@ -0,0 +1,284 @@
+/*
+ * Interrupt handling for INTC2-based IRQ.
+ *
+ * Copyright (C) 2001 David J. Mckay (david.mckay@xxxxxx)
+ * Copyright (C) 2005, 2006 Paul Mundt (lethal@xxxxxxxxxxxx)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * These are the "new Hitachi style" interrupts, as present on the
+ * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+struct intc2_data {
+ unsigned char msk_offset;
+ unsigned char msk_shift;
+
+ int (*clear_irq) (int);
+};
+
+static struct intc2_data intc2_data[NR_INTC2_IRQS];
+
+static void enable_intc2_irq(unsigned int irq);
+static void disable_intc2_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_intc2_irq disable_intc2_irq
+
+static void mask_and_ack_intc2(unsigned int);
+static void end_intc2_irq(unsigned int irq);
+
+static unsigned int startup_intc2_irq(unsigned int irq)
+{
+ enable_intc2_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type intc2_irq_type = {
+ .typename = "INTC2-IRQ",
+ .startup = startup_intc2_irq,
+ .shutdown = shutdown_intc2_irq,
+ .enable = enable_intc2_irq,
+ .disable = disable_intc2_irq,
+ .ack = mask_and_ack_intc2,
+ .end = end_intc2_irq
+};
+
+static void disable_intc2_irq(unsigned int irq)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ int msk_shift, msk_offset;
+
+ /* Sanity check */
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ msk_shift = intc2_data[irq_offset].msk_shift;
+ msk_offset = intc2_data[irq_offset].msk_offset;
+
+ ctrl_outl(1 << msk_shift,
+ INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
+}
+
+static void enable_intc2_irq(unsigned int irq)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ int msk_shift, msk_offset;
+
+ /* Sanity check */
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ msk_shift = intc2_data[irq_offset].msk_shift;
+ msk_offset = intc2_data[irq_offset].msk_offset;
+
+ ctrl_outl(1 << msk_shift,
+ INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
+}
+
+static void mask_and_ack_intc2(unsigned int irq)
+{
+ disable_intc2_irq(irq);
+}
+
+static void end_intc2_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_intc2_irq(irq);
+
+ if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
+ intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
+}
+
+/*
+ * Setup an INTC2 style interrupt.
+ * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
+ * allowing the use of the numbers straight out of the datasheet.
+ * For example:
+ * PIO1 which is INTPRI00[19,16] and INTMSK00[13]
+ * would be: ^ ^ ^ ^
+ * | | | |
+ * make_intc2_irq(84, 0, 16, 0, 13);
+ */
+void make_intc2_irq(unsigned int irq,
+ unsigned int ipr_offset, unsigned int ipr_shift,
+ unsigned int msk_offset, unsigned int msk_shift,
+ unsigned int priority)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ unsigned int flags;
+ unsigned long ipr;
+
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ disable_irq_nosync(irq);
+
+ /* Fill the data we need */
+ intc2_data[irq_offset].msk_offset = msk_offset;
+ intc2_data[irq_offset].msk_shift = msk_shift;
+ intc2_data[irq_offset].clear_irq = NULL;
+
+ /* Set the priority level */
+ local_irq_save(flags);
+
+ ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+ ipr &= ~(0xf << ipr_shift);
+ ipr |= priority << ipr_shift;
+ ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+
+ local_irq_restore(flags);
+
+ irq_desc[irq].handler = &intc2_irq_type;
+
+ disable_intc2_irq(irq);
+}
+
+static struct intc2_init {
+ unsigned short irq;
+ unsigned char ipr_offset, ipr_shift;
+ unsigned char msk_offset, msk_shift;
+ unsigned char priority;
+} intc2_init_data[] __initdata = {
+#if defined(CONFIG_CPU_SUBTYPE_ST40)
+ {64, 0, 0, 0, 0, 13}, /* PCI serr */
+ {65, 0, 4, 0, 1, 13}, /* PCI err */
+ {66, 0, 4, 0, 2, 13}, /* PCI ad */
+ {67, 0, 4, 0, 3, 13}, /* PCI pwd down */
+ {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */
+ {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */
+ {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */
+ {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */
+ {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */
+ {78, 0, 8, 0, 11, 13}, /* DMAC ERR */
+ {80, 0, 12, 0, 12, 13}, /* PIO0 */
+ {84, 0, 16, 0, 13, 13}, /* PIO1 */
+ {88, 0, 20, 0, 14, 13}, /* PIO2 */
+ {112, 4, 0, 4, 0, 13}, /* Mailbox */
+ #ifdef CONFIG_CPU_SUBTYPE_ST40GX1
+ {116, 4, 4, 4, 4, 13}, /* SSC0 */
+ {120, 4, 8, 4, 8, 13}, /* IR Blaster */
+ {124, 4, 12, 4, 12, 13}, /* USB host */
+ {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */
+ {132, 4, 20, 4, 20, 13}, /* UART0 */
+ {134, 4, 20, 4, 22, 13}, /* UART2 */
+ {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */
+ {140, 4, 28, 4, 28, 13}, /* EMPI */
+ {144, 8, 0, 8, 0, 13}, /* MAFE */
+ {148, 8, 4, 8, 4, 13}, /* PWM */
+ {152, 8, 8, 8, 8, 13}, /* SSC1 */
+ {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */
+ {160, 8, 16, 8, 16, 13}, /* USB target */
+ {164, 8, 20, 8, 20, 13}, /* UART1 */
+ {168, 8, 24, 8, 24, 13}, /* Teletext */
+ {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */
+ {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */
+ {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */
+#endif
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+/*
+ * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
+ */
+ /* INTPRIO0 | INTMSK0 */
+ {48, 0, 28, 0, 31, 3}, /* IRQ 4 */
+ {49, 0, 24, 0, 30, 3}, /* IRQ 3 */
+ {50, 0, 20, 0, 29, 3}, /* IRQ 2 */
+ {51, 0, 16, 0, 28, 3}, /* IRQ 1 */
+ /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
+ /* INTPRIO4 | INTMSK0 */
+ {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
+ {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
+ {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
+ {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */
+ {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */
+ {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
+ {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
+ {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
+ /* INTPRIO8 | INTMSK0 */
+ {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
+ {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
+ {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
+ {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
+ {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
+ {65, 8, 24, 0, 16, 3}, /* LCDC */
+ /* 66, 67 unused */
+ {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
+ {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
+ {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
+ /* 71 unused */
+ {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
+ {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
+ {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
+ {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */
+ {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */
+ {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
+ {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
+ {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
+ /* | INTMSK4 */
+ {80, 8, 4, 4, 23, 3}, /* SIM_ERI */
+ {81, 8, 4, 4, 22, 3}, /* SIM_RXI */
+ {82, 8, 4, 4, 21, 3}, /* SIM_TXI */
+ {83, 8, 4, 4, 20, 3}, /* SIM_TEI */
+ {84, 8, 0, 4, 19, 3}, /* HSPII */
+ /* INTPRIOC | INTMSK4 */
+ /* 85-87 unused/reserved */
+ {88, 12, 20, 4, 18, 3}, /* MMCI0 */
+ {89, 12, 20, 4, 17, 3}, /* MMCI1 */
+ {90, 12, 20, 4, 16, 3}, /* MMCI2 */
+ {91, 12, 20, 4, 15, 3}, /* MMCI3 */
+ {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/
+ /* 93-107 reserved/undocumented */
+ {108,12, 4, 4, 1, 3}, /* ADC */
+ {109,12, 0, 4, 0, 3}, /* CMTI */
+ /* 110-111 reserved/unused */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+ { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
+#ifdef CONFIG_SH_RTC
+ { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+#endif
+ { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+
+ { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+
+ { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
+ { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
+ { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
+ { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
+ { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
+#endif
+};
+
+void __init init_IRQ_intc2(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
+ struct intc2_init *p = intc2_init_data + i;
+ make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
+ p-> msk_offset, p->msk_shift, p->priority);
+ }
+}
+
+/* Adds a termination callback to the interrupt */
+void intc2_add_clear_irq(int irq, int (*fn)(int))
+{
+ if (unlikely(irq < INTC2_FIRST_IRQ))
+ return;
+
+ intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
+}
+
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq/ipr.c sh-2.6.15/arch/sh/kernel/cpu/irq/ipr.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq/ipr.c 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq/ipr.c 2006-01-07 22:13:59.139149503 +0200
@@ -0,0 +1,206 @@
+/*
+ * arch/sh/kernel/cpu/irq/ipr.c
+ *
+ * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@xxxxxxxxxxxxxxxx>
+ *
+ * Interrupt handling for IPR-based IRQ.
+ *
+ * Supported system:
+ * On-chip supporting modules (TMU, RTC, etc.).
+ * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300.
+ * Hitachi SolutionEngine external I/O:
+ * MS7709SE01, MS7709ASE01, and MS7750SE01
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+struct ipr_data {
+ unsigned int addr; /* Address of Interrupt Priority Register */
+ int shift; /* Shifts of the 16-bit data */
+ int priority; /* The priority */
+};
+static struct ipr_data ipr_data[NR_IRQS];
+
+static void enable_ipr_irq(unsigned int irq);
+static void disable_ipr_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_ipr_irq disable_ipr_irq
+
+static void mask_and_ack_ipr(unsigned int);
+static void end_ipr_irq(unsigned int irq);
+
+static unsigned int startup_ipr_irq(unsigned int irq)
+{
+ enable_ipr_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type ipr_irq_type = {
+ .typename = "IPR-IRQ",
+ .startup = startup_ipr_irq,
+ .shutdown = shutdown_ipr_irq,
+ .enable = enable_ipr_irq,
+ .disable = disable_ipr_irq,
+ .ack = mask_and_ack_ipr,
+ .end = end_ipr_irq
+};
+
+static void disable_ipr_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+ unsigned int addr = ipr_data[irq].addr;
+ unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift);
+
+ /* Set the priority in IPR to 0 */
+ local_irq_save(flags);
+ val = ctrl_inw(addr);
+ val &= mask;
+ ctrl_outw(val, addr);
+ local_irq_restore(flags);
+}
+
+static void enable_ipr_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+ unsigned int addr = ipr_data[irq].addr;
+ int priority = ipr_data[irq].priority;
+ unsigned short value = (priority << ipr_data[irq].shift);
+
+ /* Set priority in IPR back to original value */
+ local_irq_save(flags);
+ val = ctrl_inw(addr);
+ val |= value;
+ ctrl_outw(val, addr);
+ local_irq_restore(flags);
+}
+
+static void mask_and_ack_ipr(unsigned int irq)
+{
+ disable_ipr_irq(irq);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+ /* This is needed when we use edge triggered setting */
+ /* XXX: Is it really needed? */
+ if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) {
+ /* Clear external interrupt request */
+ int a = ctrl_inb(INTC_IRR0);
+ a &= ~(1 << (irq - IRQ0_IRQ));
+ ctrl_outb(a, INTC_IRR0);
+ }
+#endif
+}
+
+static void end_ipr_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_ipr_irq(irq);
+}
+
+void make_ipr_irq(unsigned int irq, unsigned int addr, int pos,
+ int priority, int maskpos)
+{
+ disable_irq_nosync(irq);
+ ipr_data[irq].addr = addr;
+ ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */
+ ipr_data[irq].priority = priority;
+
+ irq_desc[irq].handler = &ipr_irq_type;
+ disable_ipr_irq(irq);
+}
+
+void __init init_IRQ(void)
+{
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
+ make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0);
+ make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0);
+#if defined(CONFIG_SH_RTC)
+ make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0);
+#endif
+
+#ifdef SCI_ERI_IRQ
+ make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+ make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+ make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+#endif
+
+#ifdef SCIF1_ERI_IRQ
+ make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+ make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0);
+ make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+ make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+ make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0);
+#endif
+
+#ifdef SCIF_ERI_IRQ
+ make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+#endif
+
+#ifdef IRDA_ERI_IRQ
+ make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+ /*
+ * Initialize the Interrupt Controller (INTC)
+ * registers to their power on values
+ */
+
+ /*
+ * Enable external irq (INTC IRQ mode).
+ * You should set corresponding bits of PFC to "00"
+ * to enable these interrupts.
+ */
+ make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0);
+ make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0);
+ make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0);
+ make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0);
+ make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0);
+ make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0);
+#endif
+#endif
+
+#ifdef CONFIG_CPU_HAS_PINT_IRQ
+ init_IRQ_pint();
+#endif
+
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+ init_IRQ_intc2();
+#endif
+ /* Perform the machine specific initialisation */
+ if (sh_mv.mv_init_irq != NULL)
+ sh_mv.mv_init_irq();
+}
+
+#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
+int ipr_irq_demux(int irq)
+{
+ return irq;
+}
+#endif
+
+EXPORT_SYMBOL(make_ipr_irq);
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq/pint.c sh-2.6.15/arch/sh/kernel/cpu/irq/pint.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq/pint.c 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq/pint.c 2006-01-07 22:13:59.144149110 +0200
@@ -0,0 +1,169 @@
+/*
+ * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs.
+ *
+ * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@xxxxxxxxxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static unsigned char pint_map[256];
+static unsigned long portcr_mask;
+
+static void enable_pint_irq(unsigned int irq);
+static void disable_pint_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_pint_irq disable_pint_irq
+
+static void mask_and_ack_pint(unsigned int);
+static void end_pint_irq(unsigned int irq);
+
+static unsigned int startup_pint_irq(unsigned int irq)
+{
+ enable_pint_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type pint_irq_type = {
+ .typename = "PINT-IRQ",
+ .startup = startup_pint_irq,
+ .shutdown = shutdown_pint_irq,
+ .enable = enable_pint_irq,
+ .disable = disable_pint_irq,
+ .ack = mask_and_ack_pint,
+ .end = end_pint_irq
+};
+
+static void disable_pint_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+
+ local_irq_save(flags);
+ val = ctrl_inw(INTC_INTER);
+ val &= ~(1 << (irq - PINT_IRQ_BASE));
+ ctrl_outw(val, INTC_INTER); /* disable PINTn */
+ portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
+ local_irq_restore(flags);
+}
+
+static void enable_pint_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+
+ local_irq_save(flags);
+ val = ctrl_inw(INTC_INTER);
+ val |= 1 << (irq - PINT_IRQ_BASE);
+ ctrl_outw(val, INTC_INTER); /* enable PINTn */
+ portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
+ local_irq_restore(flags);
+}
+
+static void mask_and_ack_pint(unsigned int irq)
+{
+ disable_pint_irq(irq);
+}
+
+static void end_pint_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_pint_irq(irq);
+}
+
+void make_pint_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &pint_irq_type;
+ disable_pint_irq(irq);
+}
+
+void __init init_IRQ_pint(void)
+{
+ int i;
+
+ make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
+ make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
+
+ enable_irq(PINT0_IRQ);
+ enable_irq(PINT8_IRQ);
+
+ for(i = 0; i < 16; i++)
+ make_pint_irq(PINT_IRQ_BASE + i);
+
+ for(i = 0; i < 256; i++) {
+ if (i & 1)
+ pint_map[i] = 0;
+ else if (i & 2)
+ pint_map[i] = 1;
+ else if (i & 4)
+ pint_map[i] = 2;
+ else if (i & 8)
+ pint_map[i] = 3;
+ else if (i & 0x10)
+ pint_map[i] = 4;
+ else if (i & 0x20)
+ pint_map[i] = 5;
+ else if (i & 0x40)
+ pint_map[i] = 6;
+ else if (i & 0x80)
+ pint_map[i] = 7;
+ }
+}
+
+int ipr_irq_demux(int irq)
+{
+ unsigned long creg, dreg, d, sav;
+
+ if (irq == PINT0_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ creg = PORT_PACR;
+ dreg = PORT_PADR;
+#else
+ creg = PORT_PCCR;
+ dreg = PORT_PCDR;
+#endif
+ sav = ctrl_inw(creg);
+ ctrl_outw(sav | portcr_mask, creg);
+ d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) &
+ ctrl_inw(INTC_INTER) & 0xff;
+ ctrl_outw(sav, creg);
+
+ if (d == 0)
+ return irq;
+
+ return PINT_IRQ_BASE + pint_map[d];
+ } else if (irq == PINT8_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ creg = PORT_PBCR;
+ dreg = PORT_PBDR;
+#else
+ creg = PORT_PFCR;
+ dreg = PORT_PFDR;
+#endif
+ sav = ctrl_inw(creg);
+ ctrl_outw(sav | (portcr_mask >> 16), creg);
+ d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) &
+ (ctrl_inw(INTC_INTER) >> 8) & 0xff;
+ ctrl_outw(sav, creg);
+
+ if (d == 0)
+ return irq;
+
+ return PINT_IRQ_BASE + 8 + pint_map[d];
+ }
+
+ return irq;
+}
+
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq_imask.c sh-2.6.15/arch/sh/kernel/cpu/irq_imask.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq_imask.c 2005-11-12 20:17:23.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq_imask.c 1970-01-01 02:00:00.000000000 +0200
@@ -1,116 +0,0 @@
-/* $Id: irq_imask.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $
- *
- * linux/arch/sh/kernel/irq_imask.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- *
- * Simple interrupt handling using IMASK of SR register.
- *
- */
-
-/* NOTE: Will not work on level 15 */
-
-
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <linux/irq.h>
-
-/* Bitmap of IRQ masked */
-static unsigned long imask_mask = 0x7fff;
-static int interrupt_priority = 0;
-
-static void enable_imask_irq(unsigned int irq);
-static void disable_imask_irq(unsigned int irq);
-static void shutdown_imask_irq(unsigned int irq);
-static void mask_and_ack_imask(unsigned int);
-static void end_imask_irq(unsigned int irq);
-
-#define IMASK_PRIORITY 15
-
-static unsigned int startup_imask_irq(unsigned int irq)
-{
- /* Nothing to do */
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type imask_irq_type = {
- .typename = "SR.IMASK",
- .startup = startup_imask_irq,
- .shutdown = shutdown_imask_irq,
- .enable = enable_imask_irq,
- .disable = disable_imask_irq,
- .ack = mask_and_ack_imask,
- .end = end_imask_irq
-};
-
-void static inline set_interrupt_registers(int ip)
-{
- unsigned long __dummy;
-
- asm volatile("ldc %2, r6_bank\n\t"
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- "shlr2 %0\n\t"
- "cmp/eq #0x3c, %0\n\t"
- "bt/s 1f ! CLI-ed\n\t"
- " stc sr, %0\n\t"
- "and %1, %0\n\t"
- "or %2, %0\n\t"
- "ldc %0, sr\n"
- "1:"
- : "=&z" (__dummy)
- : "r" (~0xf0), "r" (ip << 4)
- : "t");
-}
-
-static void disable_imask_irq(unsigned int irq)
-{
- clear_bit(irq, &imask_mask);
- if (interrupt_priority < IMASK_PRIORITY - irq)
- interrupt_priority = IMASK_PRIORITY - irq;
-
- set_interrupt_registers(interrupt_priority);
-}
-
-static void enable_imask_irq(unsigned int irq)
-{
- set_bit(irq, &imask_mask);
- interrupt_priority = IMASK_PRIORITY - ffz(imask_mask);
-
- set_interrupt_registers(interrupt_priority);
-}
-
-static void mask_and_ack_imask(unsigned int irq)
-{
- disable_imask_irq(irq);
-}
-
-static void end_imask_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_imask_irq(irq);
-}
-
-static void shutdown_imask_irq(unsigned int irq)
-{
- /* Nothing to do */
-}
-
-void make_imask_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].handler = &imask_irq_type;
- enable_irq(irq);
-}
diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/irq_ipr.c sh-2.6.15/arch/sh/kernel/cpu/irq_ipr.c
--- linux-2.6.15/arch/sh/kernel/cpu/irq_ipr.c 2005-11-12 20:17:23.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/irq_ipr.c 1970-01-01 02:00:00.000000000 +0200
@@ -1,339 +0,0 @@
-/* $Id: irq_ipr.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $
- *
- * linux/arch/sh/kernel/irq_ipr.c
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@xxxxxxxxxxxxxxxx>
- *
- * Interrupt handling for IPR-based IRQ.
- *
- * Supported system:
- * On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300.
- * Hitachi SolutionEngine external I/O:
- * MS7709SE01, MS7709ASE01, and MS7750SE01
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-struct ipr_data {
- unsigned int addr; /* Address of Interrupt Priority Register */
- int shift; /* Shifts of the 16-bit data */
- int priority; /* The priority */
-};
-static struct ipr_data ipr_data[NR_IRQS];
-
-static void enable_ipr_irq(unsigned int irq);
-static void disable_ipr_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_ipr_irq disable_ipr_irq
-
-static void mask_and_ack_ipr(unsigned int);
-static void end_ipr_irq(unsigned int irq);
-
-static unsigned int startup_ipr_irq(unsigned int irq)
-{
- enable_ipr_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type ipr_irq_type = {
- .typename = "IPR-IRQ",
- .startup = startup_ipr_irq,
- .shutdown = shutdown_ipr_irq,
- .enable = enable_ipr_irq,
- .disable = disable_ipr_irq,
- .ack = mask_and_ack_ipr,
- .end = end_ipr_irq
-};
-
-static void disable_ipr_irq(unsigned int irq)
-{
- unsigned long val, flags;
- unsigned int addr = ipr_data[irq].addr;
- unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift);
-
- /* Set the priority in IPR to 0 */
- local_irq_save(flags);
- val = ctrl_inw(addr);
- val &= mask;
- ctrl_outw(val, addr);
- local_irq_restore(flags);
-}
-
-static void enable_ipr_irq(unsigned int irq)
-{
- unsigned long val, flags;
- unsigned int addr = ipr_data[irq].addr;
- int priority = ipr_data[irq].priority;
- unsigned short value = (priority << ipr_data[irq].shift);
-
- /* Set priority in IPR back to original value */
- local_irq_save(flags);
- val = ctrl_inw(addr);
- val |= value;
- ctrl_outw(val, addr);
- local_irq_restore(flags);
-}
-
-static void mask_and_ack_ipr(unsigned int irq)
-{
- disable_ipr_irq(irq);
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
- /* This is needed when we use edge triggered setting */
- /* XXX: Is it really needed? */
- if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) {
- /* Clear external interrupt request */
- int a = ctrl_inb(INTC_IRR0);
- a &= ~(1 << (irq - IRQ0_IRQ));
- ctrl_outb(a, INTC_IRR0);
- }
-#endif
-}
-
-static void end_ipr_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_ipr_irq(irq);
-}
-
-void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority)
-{
- disable_irq_nosync(irq);
- ipr_data[irq].addr = addr;
- ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */
- ipr_data[irq].priority = priority;
-
- irq_desc[irq].handler = &ipr_irq_type;
- disable_ipr_irq(irq);
-}
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static unsigned char pint_map[256];
-static unsigned long portcr_mask = 0;
-
-static void enable_pint_irq(unsigned int irq);
-static void disable_pint_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_pint_irq disable_pint_irq
-
-static void mask_and_ack_pint(unsigned int);
-static void end_pint_irq(unsigned int irq);
-
-static unsigned int startup_pint_irq(unsigned int irq)
-{
- enable_pint_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type pint_irq_type = {
- .typename = "PINT-IRQ",
- .startup = startup_pint_irq,
- .shutdown = shutdown_pint_irq,
- .enable = enable_pint_irq,
- .disable = disable_pint_irq,
- .ack = mask_and_ack_pint,
- .end = end_pint_irq
-};
-
-static void disable_pint_irq(unsigned int irq)
-{
- unsigned long val, flags;
-
- local_irq_save(flags);
- val = ctrl_inw(INTC_INTER);
- val &= ~(1 << (irq - PINT_IRQ_BASE));
- ctrl_outw(val, INTC_INTER); /* disable PINTn */
- portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
- local_irq_restore(flags);
-}
-
-static void enable_pint_irq(unsigned int irq)
-{
- unsigned long val, flags;
-
- local_irq_save(flags);
- val = ctrl_inw(INTC_INTER);
- val |= 1 << (irq - PINT_IRQ_BASE);
- ctrl_outw(val, INTC_INTER); /* enable PINTn */
- portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
- local_irq_restore(flags);
-}
-
-static void mask_and_ack_pint(unsigned int irq)
-{
- disable_pint_irq(irq);
-}
-
-static void end_pint_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_pint_irq(irq);
-}
-
-void make_pint_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].handler = &pint_irq_type;
- disable_pint_irq(irq);
-}
-#endif
-
-void __init init_IRQ(void)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- int i;
-#endif
-
- make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
- make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
-#if defined(CONFIG_SH_RTC)
- make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
-#endif
-
-#ifdef SCI_ERI_IRQ
- make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
- make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
- make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
-#endif
-
-#ifdef SCIF1_ERI_IRQ
- make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
- make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY);
- make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
-#endif
-
-#ifdef SCIF_ERI_IRQ
- make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
-#endif
-
-#ifdef IRDA_ERI_IRQ
- make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
- /*
- * Initialize the Interrupt Controller (INTC)
- * registers to their power on values
- */
-
- /*
- * Enable external irq (INTC IRQ mode).
- * You should set corresponding bits of PFC to "00"
- * to enable these interrupts.
- */
- make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY);
- make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
- make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
- make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY);
- make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY);
- make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
- make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
- enable_ipr_irq(PINT0_IRQ);
- enable_ipr_irq(PINT8_IRQ);
-
- for(i = 0; i < 16; i++)
- make_pint_irq(PINT_IRQ_BASE + i);
- for(i = 0; i < 256; i++)
- {
- if(i & 1) pint_map[i] = 0;
- else if(i & 2) pint_map[i] = 1;
- else if(i & 4) pint_map[i] = 2;
- else if(i & 8) pint_map[i] = 3;
- else if(i & 0x10) pint_map[i] = 4;
- else if(i & 0x20) pint_map[i] = 5;
- else if(i & 0x40) pint_map[i] = 6;
- else if(i & 0x80) pint_map[i] = 7;
- }
-#endif /* !CONFIG_CPU_SUBTYPE_SH7300 */
-#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 || CONFIG_CPU_SUBTYPE_SH7300*/
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- init_IRQ_intc2();
-#endif
-
- /* Perform the machine specific initialisation */
- if (sh_mv.mv_init_irq != NULL) {
- sh_mv.mv_init_irq();
- }
-}
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-int ipr_irq_demux(int irq)
-{
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- unsigned long creg, dreg, d, sav;
-
- if(irq == PINT0_IRQ)
- {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PACR;
- dreg = PORT_PADR;
-#else
- creg = PORT_PCCR;
- dreg = PORT_PCDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | portcr_mask, creg);
- d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff;
- ctrl_outw(sav, creg);
- if(d == 0) return irq;
- return PINT_IRQ_BASE + pint_map[d];
- }
- else if(irq == PINT8_IRQ)
- {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PBCR;
- dreg = PORT_PBDR;
-#else
- creg = PORT_PFCR;
- dreg = PORT_PFDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | (portcr_mask >> 16), creg);
- d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff;
- ctrl_outw(sav, creg);
- if(d == 0) return irq;
- return PINT_IRQ_BASE + 8 + pint_map[d];
- }
-#endif
- return irq;
-}
-#endif
-
-EXPORT_SYMBOL(make_ipr_irq);
-

diff -urN -X exclude linux-2.6.15/arch/sh/kernel/cpu/sh4/irq_intc2.c sh-2.6.15/arch/sh/kernel/cpu/sh4/irq_intc2.c
--- linux-2.6.15/arch/sh/kernel/cpu/sh4/irq_intc2.c 2005-11-12 20:17:23.000000000 +0200
+++ sh-2.6.15/arch/sh/kernel/cpu/sh4/irq_intc2.c 1970-01-01 02:00:00.000000000 +0200
@@ -1,222 +0,0 @@
-/*
- * linux/arch/sh/kernel/irq_intc2.c
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@xxxxxx)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Interrupt handling for INTC2-based IRQ.
- *
- * These are the "new Hitachi style" interrupts, as present on the
- * Hitachi 7751 and the STM ST40 STB1.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-
-struct intc2_data {
- unsigned char msk_offset;
- unsigned char msk_shift;
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- int (*clear_irq) (int);
-#endif
-};
-
-
-static struct intc2_data intc2_data[NR_INTC2_IRQS];
-
-static void enable_intc2_irq(unsigned int irq);
-static void disable_intc2_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_intc2_irq disable_intc2_irq
-
-static void mask_and_ack_intc2(unsigned int);
-static void end_intc2_irq(unsigned int irq);
-
-static unsigned int startup_intc2_irq(unsigned int irq)
-{
- enable_intc2_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type intc2_irq_type = {
- .typename = "INTC2-IRQ",
- .startup = startup_intc2_irq,
- .shutdown = shutdown_intc2_irq,
- .enable = enable_intc2_irq,
- .disable = disable_intc2_irq,
- .ack = mask_and_ack_intc2,
- .end = end_intc2_irq
-};
-
-static void disable_intc2_irq(unsigned int irq)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- // Sanity check
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1<<msk_shift,
- INTC2_BASE+INTC2_INTMSK_OFFSET+msk_offset);
-}
-
-static void enable_intc2_irq(unsigned int irq)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- /* Sanity check */
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1<<msk_shift,
- INTC2_BASE+INTC2_INTMSKCLR_OFFSET+msk_offset);
-}
-
-static void mask_and_ack_intc2(unsigned int irq)
-{
- disable_intc2_irq(irq);
-}
-
-static void end_intc2_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_intc2_irq(irq);
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- if (intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq (irq);
-#endif
-}
-
-/*
- * Setup an INTC2 style interrupt.
- * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
- * allowing the use of the numbers straight out of the datasheet.
- * For example:
- * PIO1 which is INTPRI00[19,16] and INTMSK00[13]
- * would be: ^ ^ ^ ^
- * | | | |
- * make_intc2_irq(84, 0, 16, 0, 13);
- */
-void make_intc2_irq(unsigned int irq,
- unsigned int ipr_offset, unsigned int ipr_shift,
- unsigned int msk_offset, unsigned int msk_shift,
- unsigned int priority)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- unsigned int flags;
- unsigned long ipr;
-
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- disable_irq_nosync(irq);
-
- /* Fill the data we need */
- intc2_data[irq_offset].msk_offset = msk_offset;
- intc2_data[irq_offset].msk_shift = msk_shift;
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- intc2_data[irq_offset].clear_irq = NULL;
-#endif
-
- /* Set the priority level */
- local_irq_save(flags);
-
- ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
- ipr&=~(0xf<<ipr_shift);
- ipr|=(priority)<<ipr_shift;
- ctrl_outl(ipr, INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
-
- local_irq_restore(flags);
-
- irq_desc[irq].handler=&intc2_irq_type;
-
- disable_intc2_irq(irq);
-}
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40
-
-struct intc2_init {
- unsigned short irq;
- unsigned char ipr_offset, ipr_shift;
- unsigned char msk_offset, msk_shift;
-};
-
-static struct intc2_init intc2_init_data[] __initdata = {
- {64, 0, 0, 0, 0}, /* PCI serr */
- {65, 0, 4, 0, 1}, /* PCI err */
- {66, 0, 4, 0, 2}, /* PCI ad */
- {67, 0, 4, 0, 3}, /* PCI pwd down */
- {72, 0, 8, 0, 5}, /* DMAC INT0 */
- {73, 0, 8, 0, 6}, /* DMAC INT1 */
- {74, 0, 8, 0, 7}, /* DMAC INT2 */
- {75, 0, 8, 0, 8}, /* DMAC INT3 */
- {76, 0, 8, 0, 9}, /* DMAC INT4 */
- {78, 0, 8, 0, 11}, /* DMAC ERR */
- {80, 0, 12, 0, 12}, /* PIO0 */
- {84, 0, 16, 0, 13}, /* PIO1 */
- {88, 0, 20, 0, 14}, /* PIO2 */
- {112, 4, 0, 4, 0}, /* Mailbox */
-#ifdef CONFIG_CPU_SUBTYPE_ST40GX1
- {116, 4, 4, 4, 4}, /* SSC0 */
- {120, 4, 8, 4, 8}, /* IR Blaster */
- {124, 4, 12, 4, 12}, /* USB host */
- {128, 4, 16, 4, 16}, /* Video processor BLITTER */
- {132, 4, 20, 4, 20}, /* UART0 */
- {134, 4, 20, 4, 22}, /* UART2 */
- {136, 4, 24, 4, 24}, /* IO_PIO0 */
- {140, 4, 28, 4, 28}, /* EMPI */
- {144, 8, 0, 8, 0}, /* MAFE */
- {148, 8, 4, 8, 4}, /* PWM */
- {152, 8, 8, 8, 8}, /* SSC1 */
- {156, 8, 12, 8, 12}, /* IO_PIO1 */
- {160, 8, 16, 8, 16}, /* USB target */
- {164, 8, 20, 8, 20}, /* UART1 */
- {168, 8, 24, 8, 24}, /* Teletext */
- {172, 8, 28, 8, 28}, /* VideoSync VTG */
- {173, 8, 28, 8, 29}, /* VideoSync DVP0 */
- {174, 8, 28, 8, 30}, /* VideoSync DVP1 */
-#endif
-};
-
-void __init init_IRQ_intc2(void)
-{
- struct intc2_init *p;
-
- printk(KERN_ALERT "init_IRQ_intc2\n");
-
- for (p = intc2_init_data;
- p<intc2_init_data+ARRAY_SIZE(intc2_init_data);
- p++) {
- make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
- p-> msk_offset, p->msk_shift, 13);
- }
-}
-
-/* Adds a termination callback to the interrupt */
-void intc2_add_clear_irq(int irq, int (*fn)(int))
-{
- if (irq < INTC2_FIRST_IRQ)
- return;
-
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
-}
-
-#endif /* CONFIG_CPU_SUBTYPE_ST40 */

diff -urN -X exclude linux-2.6.15/arch/sh/kernel/irq.c sh-2.6.15/arch/sh/kernel/irq.c
--- linux-2.6.15/arch/sh/kernel/irq.c 2005-06-20 22:45:19.000000000 +0300
+++ sh-2.6.15/arch/sh/kernel/irq.c 2006-01-07 22:13:59.229142425 +0200
@@ -8,38 +8,13 @@
* SuperH version: Copyright (C) 1999 Niibe Yutaka
*/

-/*
- * IRQs are in fact implemented a bit like signal handlers for the kernel.
- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
+#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
-#include <linux/kallsyms.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgalloc.h>
-#include <asm/delay.h>
#include <asm/irq.h>
-#include <linux/irq.h>
-
+#include <asm/processor.h>
+#include <asm/cpu/mmu_context.h>

/*
* 'what should we do if we get a hw irq event on an illegal vector'.
@@ -66,7 +41,7 @@
seq_putc(p, '\n');
}

- if (i < ACTUAL_NR_IRQS) {
+ if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
@@ -86,19 +61,32 @@
}
#endif

+
asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs regs)
-{
- int irq;
+{
+ int irq = r4;

irq_enter();
- asm volatile("stc r2_bank, %0\n\t"
- "shlr2 %0\n\t"
- "shlr2 %0\n\t"
- "shlr %0\n\t"
- "add #-16, %0\n\t"
- :"=z" (irq));
+
+#ifdef CONFIG_CPU_HAS_INTEVT
+ __asm__ __volatile__ (
+#ifdef CONFIG_CPU_HAS_SR_RB
+ "stc r2_bank, %0\n\t"
+#else
+ "mov.l @%1, %0\n\t"
+#endif
+ "shlr2 %0\n\t"
+ "shlr2 %0\n\t"
+ "shlr %0\n\t"
+ "add #-16, %0\n\t"
+ : "=z" (irq), "=r" (r4)
+ : "1" (INTEVT)
+ : "memory"
+ );
+#endif
+
irq = irq_demux(irq);
__do_IRQ(irq, &regs);
irq_exit();

diff -urN -X exclude linux-2.6.15/include/asm-sh/irq-sh73180.h sh-2.6.15/include/asm-sh/irq-sh73180.h
--- linux-2.6.15/include/asm-sh/irq-sh73180.h 2004-12-26 05:37:56.000000000 +0200
+++ sh-2.6.15/include/asm-sh/irq-sh73180.h 2006-01-04 00:15:30.000000000 +0200
@@ -12,14 +12,14 @@
#undef INTC_IPRC
#undef INTC_IPRD

-#undef DMTE0_IRQ
-#undef DMTE1_IRQ
-#undef DMTE2_IRQ
-#undef DMTE3_IRQ
-#undef DMTE4_IRQ
-#undef DMTE5_IRQ
-#undef DMTE6_IRQ
-#undef DMTE7_IRQ
+#undef DMTE0_IRQ
+#undef DMTE1_IRQ
+#undef DMTE2_IRQ
+#undef DMTE3_IRQ
+#undef DMTE4_IRQ
+#undef DMTE5_IRQ
+#undef DMTE6_IRQ
+#undef DMTE7_IRQ
#undef DMAE_IRQ
#undef DMA_IPR_ADDR
#undef DMA_IPR_POS
diff -urN -X exclude linux-2.6.15/include/asm-sh/irq-sh7780.h sh-2.6.15/include/asm-sh/irq-sh7780.h
--- linux-2.6.15/include/asm-sh/irq-sh7780.h 1970-01-01 02:00:00.000000000 +0200
+++ sh-2.6.15/include/asm-sh/irq-sh7780.h 2006-01-07 22:13:59.261139909 +0200
@@ -0,0 +1,349 @@
+#ifndef __ASM_SH_IRQ_SH7780_H
+#define __ASM_SH_IRQ_SH7780_H
+
+/*
+ * linux/include/asm-sh/irq-sh7780.h
+ *
+ * Copyright (C) 2004 Takashi SHUDO <shudo@xxxxxxxxxxxxxxxx>
+ */
+
+#ifdef CONFIG_IDE
+# ifndef IRQ_CFCARD
+# define IRQ_CFCARD 14
+# endif
+# ifndef IRQ_PCMCIA
+# define IRQ_PCMCIA 15
+# endif
+#endif
+
+#define INTC_BASE 0xffd00000
+#define INTC_ICR0 (INTC_BASE+0x0)
+#define INTC_ICR1 (INTC_BASE+0x1c)
+#define INTC_INTPRI (INTC_BASE+0x10)
+#define INTC_INTREQ (INTC_BASE+0x24)
+#define INTC_INTMSK0 (INTC_BASE+0x44)
+#define INTC_INTMSK1 (INTC_BASE+0x48)
+#define INTC_INTMSK2 (INTC_BASE+0x40080)
+#define INTC_INTMSKCLR0 (INTC_BASE+0x64)
+#define INTC_INTMSKCLR1 (INTC_BASE+0x68)
+#define INTC_INTMSKCLR2 (INTC_BASE+0x40084)
+#define INTC_NMIFCR (INTC_BASE+0xc0)
+#define INTC_USERIMASK (INTC_BASE+0x30000)
+
+#define INTC_INT2PRI0 (INTC_BASE+0x40000)
+#define INTC_INT2PRI1 (INTC_BASE+0x40004)
+#define INTC_INT2PRI2 (INTC_BASE+0x40008)
+#define INTC_INT2PRI3 (INTC_BASE+0x4000c)
+#define INTC_INT2PRI4 (INTC_BASE+0x40010)
+#define INTC_INT2PRI5 (INTC_BASE+0x40014)
+#define INTC_INT2PRI6 (INTC_BASE+0x40018)
+#define INTC_INT2PRI7 (INTC_BASE+0x4001c)
+#define INTC_INT2A0 (INTC_BASE+0x40030)
+#define INTC_INT2A1 (INTC_BASE+0x40034)
+#define INTC_INT2MSKR (INTC_BASE+0x40038)
+#define INTC_INT2MSKCR (INTC_BASE+0x4003c)
+#define INTC_INT2B0 (INTC_BASE+0x40040)
+#define INTC_INT2B1 (INTC_BASE+0x40044)
+#define INTC_INT2B2 (INTC_BASE+0x40048)
+#define INTC_INT2B3 (INTC_BASE+0x4004c)
+#define INTC_INT2B4 (INTC_BASE+0x40050)
+#define INTC_INT2B5 (INTC_BASE+0x40054)
+#define INTC_INT2B6 (INTC_BASE+0x40058)
+#define INTC_INT2B7 (INTC_BASE+0x4005c)
+#define INTC_INT2GPIC (INTC_BASE+0x40090)
+/*
+ NOTE:
+ *_IRQ = (INTEVT2 - 0x200)/0x20
+*/
+/* IRQ 0-7 line external int*/
+#define IRQ0_IRQ 2
+#define IRQ0_IPR_ADDR INTC_INTPRI
+#define IRQ0_IPR_POS 7
+#define IRQ0_PRIORITY 2
+
+#define IRQ1_IRQ 4
+#define IRQ1_IPR_ADDR INTC_INTPRI
+#define IRQ1_IPR_POS 6
+#define IRQ1_PRIORITY 2
+
+#define IRQ2_IRQ 6
+#define IRQ2_IPR_ADDR INTC_INTPRI
+#define IRQ2_IPR_POS 5
+#define IRQ2_PRIORITY 2
+
+#define IRQ3_IRQ 8
+#define IRQ3_IPR_ADDR INTC_INTPRI
+#define IRQ3_IPR_POS 4
+#define IRQ3_PRIORITY 2
+
+#define IRQ4_IRQ 10
+#define IRQ4_IPR_ADDR INTC_INTPRI
+#define IRQ4_IPR_POS 3
+#define IRQ4_PRIORITY 2
+
+#define IRQ5_IRQ 12
+#define IRQ5_IPR_ADDR INTC_INTPRI
+#define IRQ5_IPR_POS 2
+#define IRQ5_PRIORITY 2
+
+#define IRQ6_IRQ 14
+#define IRQ6_IPR_ADDR INTC_INTPRI
+#define IRQ6_IPR_POS 1
+#define IRQ6_PRIORITY 2
+
+#define IRQ7_IRQ 0
+#define IRQ7_IPR_ADDR INTC_INTPRI
+#define IRQ7_IPR_POS 0
+#define IRQ7_PRIORITY 2
+
+/* TMU */
+/* ch0 */
+#define TMU_IRQ 28
+#define TMU_IPR_ADDR INTC_INT2PRI0
+#define TMU_IPR_POS 3
+#define TMU_PRIORITY 2
+
+#define TIMER_IRQ 28
+#define TIMER_IPR_ADDR INTC_INT2PRI0
+#define TIMER_IPR_POS 3
+#define TIMER_PRIORITY 2
+
+/* ch 1*/
+#define TMU_CH1_IRQ 29
+#define TMU_CH1_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH1_IPR_POS 2
+#define TMU_CH1_PRIORITY 2
+
+#define TIMER1_IRQ 29
+#define TIMER1_IPR_ADDR INTC_INT2PRI0
+#define TIMER1_IPR_POS 2
+#define TIMER1_PRIORITY 2
+
+/* ch 2*/
+#define TMU_CH2_IRQ 30
+#define TMU_CH2_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH2_IPR_POS 1
+#define TMU_CH2_PRIORITY 2
+/* ch 2 Input capture */
+#define TMU_CH2IC_IRQ 31
+#define TMU_CH2IC_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH2IC_IPR_POS 0
+#define TMU_CH2IC_PRIORITY 2
+/* ch 3 */
+#define TMU_CH3_IRQ 96
+#define TMU_CH3_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH3_IPR_POS 3
+#define TMU_CH3_PRIORITY 2
+/* ch 4 */
+#define TMU_CH4_IRQ 97
+#define TMU_CH4_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH4_IPR_POS 2
+#define TMU_CH4_PRIORITY 2
+/* ch 5*/
+#define TMU_CH5_IRQ 98
+#define TMU_CH5_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH5_IPR_POS 1
+#define TMU_CH5_PRIORITY 2
+
+#define RTC_IRQ 22
+#define RTC_IPR_ADDR INTC_INT2PRI1
+#define RTC_IPR_POS 0
+#define RTC_PRIORITY TIMER_PRIORITY
+
+/* SCIF0 */
+#define SCIF0_ERI_IRQ 40
+#define SCIF0_RXI_IRQ 41
+#define SCIF0_BRI_IRQ 42
+#define SCIF0_TXI_IRQ 43
+#define SCIF0_IPR_ADDR INTC_INT2PRI2
+#define SCIF0_IPR_POS 3
+#define SCIF0_PRIORITY 3
+
+/* SCIF1 */
+#define SCIF1_ERI_IRQ 76
+#define SCIF1_RXI_IRQ 77
+#define SCIF1_BRI_IRQ 78
+#define SCIF1_TXI_IRQ 79
+#define SCIF1_IPR_ADDR INTC_INT2PRI2
+#define SCIF1_IPR_POS 2
+#define SCIF1_PRIORITY 3
+
+#define WDT_IRQ 27
+#define WDT_IPR_ADDR INTC_INT2PRI2
+#define WDT_IPR_POS 1
+#define WDT_PRIORITY 2
+
+/* DMAC(0) */
+#define DMINT0_IRQ 34
+#define DMINT1_IRQ 35
+#define DMINT2_IRQ 36
+#define DMINT3_IRQ 37
+#define DMINT4_IRQ 44
+#define DMINT5_IRQ 45
+#define DMINT6_IRQ 46
+#define DMINT7_IRQ 47
+#define DMAE_IRQ 38
+#define DMA0_IPR_ADDR INTC_INT2PRI3
+#define DMA0_IPR_POS 2
+#define DMA0_PRIORITY 7
+
+/* DMAC(1) */
+#define DMINT8_IRQ 92
+#define DMINT9_IRQ 93
+#define DMINT10_IRQ 94
+#define DMINT11_IRQ 95
+#define DMA1_IPR_ADDR INTC_INT2PRI3
+#define DMA1_IPR_POS 1
+#define DMA1_PRIORITY 7
+
+#define DMTE0_IRQ DMINT0_IRQ
+#define DMTE4_IRQ DMINT4_IRQ
+#define DMA_IPR_ADDR DMA0_IPR_ADDR
+#define DMA_IPR_POS DMA0_IPR_POS
+#define DMA_PRIORITY DMA0_PRIORITY
+
+/* CMT */
+#define CMT_IRQ 56
+#define CMT_IPR_ADDR INTC_INT2PRI4
+#define CMT_IPR_POS 3
+#define CMT_PRIORITY 0
+
+/* HAC */
+#define HAC_IRQ 60
+#define HAC_IPR_ADDR INTC_INT2PRI4
+#define HAC_IPR_POS 2
+#define CMT_PRIORITY 0
+
+/* PCIC(0) */
+#define PCIC0_IRQ 64
+#define PCIC0_IPR_ADDR INTC_INT2PRI4
+#define PCIC0_IPR_POS 1
+#define PCIC0_PRIORITY 2
+
+/* PCIC(1) */
+#define PCIC1_IRQ 65
+#define PCIC1_IPR_ADDR INTC_INT2PRI4
+#define PCIC1_IPR_POS 0
+#define PCIC1_PRIORITY 2
+
+/* PCIC(2) */
+#define PCIC2_IRQ 66
+#define PCIC2_IPR_ADDR INTC_INT2PRI5
+#define PCIC2_IPR_POS 3
+#define PCIC2_PRIORITY 2
+
+/* PCIC(3) */
+#define PCIC3_IRQ 67
+#define PCIC3_IPR_ADDR INTC_INT2PRI5
+#define PCIC3_IPR_POS 2
+#define PCIC3_PRIORITY 2
+
+/* PCIC(4) */
+#define PCIC4_IRQ 68
+#define PCIC4_IPR_ADDR INTC_INT2PRI5
+#define PCIC4_IPR_POS 1
+#define PCIC4_PRIORITY 2
+
+/* PCIC(5) */
+#define PCICERR_IRQ 69
+#define PCICPWD3_IRQ 70
+#define PCICPWD2_IRQ 71
+#define PCICPWD1_IRQ 72
+#define PCICPWD0_IRQ 73
+#define PCIC5_IPR_ADDR INTC_INT2PRI5
+#define PCIC5_IPR_POS 0
+#define PCIC5_PRIORITY 2
+
+/* SIOF */
+#define SIOF_IRQ 80
+#define SIOF_IPR_ADDR INTC_INT2PRI6
+#define SIOF_IPR_POS 3
+#define SIOF_PRIORITY 3
+
+/* HSPI */
+#define HSPI_IRQ 84
+#define HSPI_IPR_ADDR INTC_INT2PRI6
+#define HSPI_IPR_POS 2
+#define HSPI_PRIORITY 3
+
+/* MMCIF */
+#define MMCIF_FSTAT_IRQ 88
+#define MMCIF_TRAN_IRQ 89
+#define MMCIF_ERR_IRQ 90
+#define MMCIF_FRDY_IRQ 91
+#define MMCIF_IPR_ADDR INTC_INT2PRI6
+#define MMCIF_IPR_POS 1
+#define HSPI_PRIORITY 3
+
+/* SSI */
+#define SSI_IRQ 100
+#define SSI_IPR_ADDR INTC_INT2PRI6
+#define SSI_IPR_POS 0
+#define SSI_PRIORITY 3
+
+/* FLCTL */
+#define FLCTL_FLSTE_IRQ 104
+#define FLCTL_FLTEND_IRQ 105
+#define FLCTL_FLTRQ0_IRQ 106
+#define FLCTL_FLTRQ1_IRQ 107
+#define FLCTL_IPR_ADDR INTC_INT2PRI7
+#define FLCTL_IPR_POS 3
+#define FLCTL_PRIORITY 3
+
+/* GPIO */
+#define GPIO0_IRQ 108
+#define GPIO1_IRQ 109
+#define GPIO2_IRQ 110
+#define GPIO3_IRQ 111
+#define GPIO_IPR_ADDR INTC_INT2PRI7
+#define GPIO_IPR_POS 2
+#define GPIO_PRIORITY 3
+
+/* ONCHIP_NR_IRQS */
+#define NR_IRQS 150 /* 111 + 16 */
+
+/* In a generic kernel, NR_IRQS is an upper bound, and we should use
+ * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
+ */
+#define ACTUAL_NR_IRQS NR_IRQS
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * Function for "on chip support modules".
+ */
+extern void make_imask_irq(unsigned int irq);
+
+#define INTC_TMU0_MSK 0
+#define INTC_TMU3_MSK 1
+#define INTC_RTC_MSK 2
+#define INTC_SCIF0_MSK 3
+#define INTC_SCIF1_MSK 4
+#define INTC_WDT_MSK 5
+#define INTC_HUID_MSK 7
+#define INTC_DMAC0_MSK 8
+#define INTC_DMAC1_MSK 9
+#define INTC_CMT_MSK 12
+#define INTC_HAC_MSK 13
+#define INTC_PCIC0_MSK 14
+#define INTC_PCIC1_MSK 15
+#define INTC_PCIC2_MSK 16
+#define INTC_PCIC3_MSK 17
+#define INTC_PCIC4_MSK 18
+#define INTC_PCIC5_MSK 19
+#define INTC_SIOF_MSK 20
+#define INTC_HSPI_MSK 21
+#define INTC_MMCIF_MSK 22
+#define INTC_SSI_MSK 23
+#define INTC_FLCTL_MSK 24
+#define INTC_GPIO_MSK 25
+
+#endif /* __ASM_SH_IRQ_SH7780_H */
diff -urN -X exclude linux-2.6.15/include/asm-sh/irq.h sh-2.6.15/include/asm-sh/irq.h
--- linux-2.6.15/include/asm-sh/irq.h 2005-11-12 20:18:07.000000000 +0200
+++ sh-2.6.15/include/asm-sh/irq.h 2006-01-07 22:13:59.279138493 +0200
@@ -15,13 +15,20 @@
#include <asm/machvec.h>
#include <asm/ptrace.h> /* for pt_regs */

-#if defined(CONFIG_SH_HP600) || \
+#if defined(CONFIG_SH_HP6XX) || \
defined(CONFIG_SH_RTS7751R2D) || \
defined(CONFIG_SH_HS7751RVOIP) || \
- defined(CONFIG_SH_SH03)
+ defined(CONFIG_SH_HS7751RVOIP) || \
+ defined(CONFIG_SH_SH03) || \
+ defined(CONFIG_SH_R7780RP) || \
+ defined(CONFIG_SH_LANDISK)
#include <asm/mach/ide.h>
#endif

+#ifndef CONFIG_CPU_SUBTYPE_SH7780
+
+#define INTC_DMAC0_MSK 0
+
#if defined(CONFIG_CPU_SH3)
#define INTC_IPRA 0xfffffee2UL
#define INTC_IPRB 0xfffffee4UL
@@ -235,8 +242,9 @@
#define SCIF1_IPR_ADDR INTC_IPRB
#define SCIF1_IPR_POS 1
#define SCIF1_PRIORITY 3
-#endif
-#endif
+#endif /* ST40STB1 */
+
+#endif /* 775x / SH4-202 / ST40STB1 */

/* NR_IRQS is made from three components:
* 1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
@@ -245,37 +253,35 @@
*/

/* 1. ONCHIP_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#if defined(CONFIG_CPU_SUBTYPE_SH7604)
+# define ONCHIP_NR_IRQS 24 // Actually 21
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707)
+# define ONCHIP_NR_IRQS 64
+# define PINT_NR_IRQS 16
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+# define ONCHIP_NR_IRQS 32
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define ONCHIP_NR_IRQS 64 // Actually 61
+# define PINT_NR_IRQS 16
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750)
+# define ONCHIP_NR_IRQS 48 // Actually 44
+#elif defined(CONFIG_CPU_SUBTYPE_SH7751)
+# define ONCHIP_NR_IRQS 72
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+# define ONCHIP_NR_IRQS 112 /* XXX */
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+# define ONCHIP_NR_IRQS 72
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+# define ONCHIP_NR_IRQS 144
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+# define ONCHIP_NR_IRQS 109
+#elif defined(CONFIG_SH_UNKNOWN) /* Most be last */
# define ONCHIP_NR_IRQS 144
-#else
-# if defined(CONFIG_CPU_SUBTYPE_SH7604)
-# define ONCHIP_NR_IRQS 24 // Actually 21
-# elif defined(CONFIG_CPU_SUBTYPE_SH7707)
-# define ONCHIP_NR_IRQS 64
-# define PINT_NR_IRQS 16
-# elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define ONCHIP_NR_IRQS 32
-# elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define ONCHIP_NR_IRQS 64 // Actually 61
-# define PINT_NR_IRQS 16
-# elif defined(CONFIG_CPU_SUBTYPE_SH7750)
-# define ONCHIP_NR_IRQS 48 // Actually 44
-# elif defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define ONCHIP_NR_IRQS 72
-# elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define ONCHIP_NR_IRQS 110
-# elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define ONCHIP_NR_IRQS 72
-# elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define ONCHIP_NR_IRQS 144
-# elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define ONCHIP_NR_IRQS 109
-# endif
#endif

/* 2. PINT_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#ifdef CONFIG_SH_UNKNOWN
# define PINT_NR_IRQS 16
#else
# ifndef PINT_NR_IRQS
@@ -288,22 +294,22 @@
#endif

/* 3. OFFCHIP_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#if defined(CONFIG_HD64461)
+# define OFFCHIP_NR_IRQS 18
+#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
+# define OFFCHIP_NR_IRQS 48
+#elif defined(CONFIG_HD64465)
# define OFFCHIP_NR_IRQS 16
+#elif defined (CONFIG_SH_EC3104)
+# define OFFCHIP_NR_IRQS 16
+#elif defined (CONFIG_SH_DREAMCAST)
+# define OFFCHIP_NR_IRQS 96
+#elif defined (CONFIG_SH_TITAN)
+# define OFFCHIP_NR_IRQS 4
+#elif defined(CONFIG_SH_UNKNOWN)
+# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
-# if defined(CONFIG_HD64461)
-# define OFFCHIP_NR_IRQS 18
-# elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
-# define OFFCHIP_NR_IRQS 48
-# elif defined(CONFIG_HD64465)
-# define OFFCHIP_NR_IRQS 16
-# elif defined (CONFIG_SH_EC3104)
-# define OFFCHIP_NR_IRQS 16
-# elif defined (CONFIG_SH_DREAMCAST)
-# define OFFCHIP_NR_IRQS 96
-# else
-# define OFFCHIP_NR_IRQS 0
-# endif
+# define OFFCHIP_NR_IRQS 0
#endif

#if OFFCHIP_NR_IRQS > 0
@@ -313,16 +319,6 @@
/* NR_IRQS. 1+2+3 */
#define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)

-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#ifdef CONFIG_SH_GENERIC
-# define ACTUAL_NR_IRQS (sh_mv.mv_nr_irqs)
-#else
-# define ACTUAL_NR_IRQS NR_IRQS
-#endif
-
-
extern void disable_irq(unsigned int);
extern void disable_irq_nosync(unsigned int);
extern void enable_irq(unsigned int);
@@ -542,9 +538,6 @@

extern int ipr_irq_demux(int irq);
#define __irq_demux(irq) ipr_irq_demux(irq)
-
-#else
-#define __irq_demux(irq) irq
#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */

#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
@@ -557,18 +550,35 @@
#define INTC_ICR_IRLM (1<<7)
#endif

-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+#else
+#include <asm/irq-sh7780.h>
+#endif

+/* SH with INTC2-style interrupts */
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+#define INTC2_BASE 0xfe080000
#define INTC2_FIRST_IRQ 64
-#define NR_INTC2_IRQS 25
-
+#define INTC2_INTREQ_OFFSET 0x20
+#define INTC2_INTMSK_OFFSET 0x40
+#define INTC2_INTMSKCLR_OFFSET 0x60
+#define NR_INTC2_IRQS 25
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
#define INTC2_BASE 0xfe080000
-#define INTC2_INTC2MODE (INTC2_BASE+0x80)
-
-#define INTC2_INTPRI_OFFSET 0x00
+#define INTC2_FIRST_IRQ 48 /* INTEVT 0x800 */
#define INTC2_INTREQ_OFFSET 0x20
#define INTC2_INTMSK_OFFSET 0x40
#define INTC2_INTMSKCLR_OFFSET 0x60
+#define NR_INTC2_IRQS 64
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define INTC2_BASE 0xffd40000
+#define INTC2_FIRST_IRQ 22
+#define INTC2_INTMSK_OFFSET (0x38)
+#define INTC2_INTMSKCLR_OFFSET (0x3c)
+#define NR_INTC2_IRQS 60
+#endif
+
+#define INTC2_INTPRI_OFFSET 0x00

void make_intc2_irq(unsigned int irq,
unsigned int ipr_offset, unsigned int ipr_shift,
@@ -577,13 +587,16 @@
void init_IRQ_intc2(void);
void intc2_add_clear_irq(int irq, int (*fn)(int));

-#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
+#endif

static inline int generic_irq_demux(int irq)
{
return irq;
}

+#ifndef __irq_demux
+#define __irq_demux(irq) (irq)
+#endif
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq))
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/