Re: iommu_alloc failure and panic
From: Doug Maxey
Date: Mon Jan 30 2006 - 20:17:31 EST
On Tue, 31 Jan 2006 10:13:48 +1100, Olof Johansson wrote:
>On Mon, Jan 30, 2006 at 07:32:58AM -0800, Mark Haverkamp wrote:
>> On Sat, 2006-01-28 at 12:34 +1300, Olof Johansson wrote:
>> > On Fri, Jan 27, 2006 at 02:39:50PM -0800, Mark Haverkamp wrote:
>> >
>> > > I would have thought that the npages would be 1 now.
>> >
>> > No, npages is the size of the allocation coming from the driver, that
>> > won't chance. The table blocksize just says how wide the cacheline size
>> > is, i.e. how far it should advance between allocations.
>> >
>> > This is a patch that should probably have been added a while ago, to
>> > give a bit more info. Can you apply it and give it a go?
>> >
>> >
>> > Thanks,
>> >
>> > Olof
>> >
>>
>>
>> Here are the last few lines of the log before it crashed.
>>
>>
>> Jan 30 07:29:14 linux kernel: table size 10000 used f752
>
>Ok, that's a 256MB table, which is standard, and it seems to have been
>filled with mappings. in some cases there's a few entries left but it's
>likely that fragmentation causes the 10-entry alloc to fail, quite
>normal.
>
>There's two things to look at, unfortunately I fall short on both of
>them myself:
>
>1) There's a way to get more than the default 256MB DMA window for a PCI
>slot. I'm not aware of the exact details, but you need recent firmware
>and you configure it in the ASM menues (the web interface for the
>service processor). Cc:ing Jake Moilanen in case he has any more up to
>date info.
>
ASM > System Configuration > I/O Adapter Enlarged Capacity.
This only applies to the last slot on a PHB. AKA superslot.
>2) The emulex driver has been prone to problems in the past where it's
>been very aggressive at starting DMA operations, and I think it can
>be avoided with tuning. What I don't know is if it's because of this,
>or simply because of the large number of targets you have. Cc:ing James
>Smart.
>
>
>-Olof
>_______________________________________________
>Linuxppc64-dev mailing list
>Linuxppc64-dev@xxxxxxxxxx
>https://ozlabs.org/mailman/listinfo/linuxppc64-dev
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/