RE: [OT] 8-port AHCI SATA Controller?

[Roger Heflin]

> -----Original Message-----
> From: linux-kernel-owner@xxxxxxxxxxxxxxx 
> [mailto:linux-kernel-owner@xxxxxxxxxxxxxxx] On Behalf Of 
> Lennart Sorensen
> Sent: Tuesday, January 31, 2006 12:58 PM
> To: Sander
> Cc: linux-kernel@xxxxxxxxxxxxxxx; jgarzik@xxxxxxxxx
> Subject: Re: [OT] 8-port AHCI SATA Controller?
> 
> On Tue, Jan 31, 2006 at 07:50:07PM +0100, Sander wrote:
> > Actually, I need 24 ports :-)  But 3x SX8 sets me back 540 dollars 
> > according to pricewatch, which is less than half.
> 
> I know with older promise controllers, it wasn't possible to 
> run more than 2 in one system as far as I remember due to 
> some dma issues.  Not sure if that applies to the SX8.
> 
> If it turns out the SX8 has issues (like the one pointed out 
> earlier about number of commands to the card at once) or that 
> it can't have 3 cards in one system at once, then what?  Are 
> you then out $540 + the cost of a better controller?  
> Certainly worth finding out before spending the money.
> 
> > Fakeraid controllers are less expensive, and would do too of course 
> > :-)
> 
> Of course those aren't hardware, and are only meant for small 
> toy raids for windows users.  The rest of use treat them as 
> ide/sata controllers only.  I haven't seen one of those with 
> more than 4 ports either.  If the SX8 is one, then I must 
> admit I haven't looked at it before.  I try to avoid hardware 
> from promise whenever possible.
> 

Highpoint has some that I believe are software raidish.

They do have on-board parity generators that are used when
you use there binary only modules.

I have heard that they will work with later kernels (2.6.15+)
since the highpoint are a standard Marvell chipset, and they
seem to be fairly price competitive with JBOD raid controllers,
and have some controllers that have more than 8 ports, the price
per port may be better on the larger controllers.

Using 3 disk software stripe (linux) or 3 disks software stripe
(binary modules) I have got IO rates of 135MB/second sustained
over 90-100 GB read/write tests.

                       Roger

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/