Re: iommu_alloc failure and panic

[Mark Haverkamp]

On Tue, 2006-01-31 at 08:41 -0500, James Smart wrote:
> >> 2) The emulex driver has been prone to problems in the past where it's
> >> been very aggressive at starting DMA operations, and I think it can
> >> be avoided with tuning. What I don't know is if it's because of this,
> >> or simply because of the large number of targets you have. Cc:ing James
> >> Smart.
> 
> I don't have data points for the 2.6 kernel, but I can comment on what I
> have seen on the 2.4 kernel.
> 
> The issue that I saw on the 2.4 kernel was that the pci dma alloc routine
> was inappropriately allocating from the dma s/g maps. On systems with less
> than 4Gig of memory, or on those with no iommmu (emt64), the checks around
> adapter-supported dma masks were off (I'm going to be loose in terms to not
> describe it in detail). The result was, although the adapter could support
> a fully 64bit address and/or although the physical dma address would be under
> 32-bits, the logic forced allocation from the mapped dma pool. On some
> systems, this pool was originally only 16MB. Around 2.4.30, the swiotlb was
> introduced, which reduced issue, but unfortunately, still never solved the
> allocation logic. It fails less as the swiotlb simply had more space.
> As far as I know, this problem doesn't exist in the 2.6 kernel. I'd have to
> go look at the dma map functions to make sure.
> 
> Why was the lpfc driver prone to the dma map exhaustion failures ? Due to the
> default # of commands per lun and max sg segments reported by the driver to
> the scsi midlayer, the scsi mid-layer's preallocation of dma maps for commands
> for each lun, and the fact that our FC configs were usually large, had lots
> of luns, and replicated the resources for each path to the same storage.
> 
> Ultimately, what I think is the real issue here is the way the scsi mid-layer
> is preallocating dma maps for the luns. 16000 luns is a huge number.
> Multiply this by a max sg segment count of 64 by the driver, and a number
> between 3 and 30 commands per lun, and you can see the numbers. Scsi does do
> some interesting allocation algorithms once it hits an allocation failure.
> One side effect of this is that it is fairly efficient at allocating the
> bulk of the dma pool.

James,

Thanks for the information.  I tried loading the lpfc driver with
lpfc_lun_queue_depth=1 and haven't seen iommu_alloc failures.  I'm still
curious why the alloc failures lead to a panic though.

Mark.


> 
> -- james s
-- 
Mark Haverkamp <markh@xxxxxxxx>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/