Re: [PATCH] spi: Add PXA2xx SSP SPI Driver

[Stephen Street]

On Tue, 2006-02-07 at 11:50 +0000, David Vrabel wrote:
> PXA27x has a clock speed of 13000000 Hz.
> 
Yea... And this affects the divisor calculation depending on type of CPU
and when the CPU is a PXA260 or PXA25x which SSP port.  And worse, the
SSP controller (as opposed to the NSSP/ASSP) on the PXA25x and PXA260
use a different divisor calculation:

Serial Bit Rate = SSP Port Clock / 2 / (SCR + 1)

The pxa_regs.h file is misleading and potentially inaccurate in this
respect.

> Consider spi->max_speed_hz == CLOCK_SPEED_HZ which gives a divisor of 3
> (when it should be 1).
> 
> You need SSCR0_SerClkDiv(CLOCK_SPEED_HZ / (spi->max_speed_hz + 1) + 1)
> for the correct divisor and for proper rounding.
Yes, but see qualification above.  I will fix this as you suggest, with
some modifications. FYI The CPU differences also exposed a similar
problem with the DMA setup.  Thanks!

> 
> > +	/* Attach to IRQ */
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq == 0) {
> > +		dev_err(&pdev->dev, "irq resource not defined\n");
> > +		status = -ENODEV;
> > +		goto out_error_master_alloc;
> > +	}
> 
> Greg K-H has a patch pending that makes platform_get_irq() return -ENXIO
> instead of 0 on error.  This is required for SSP3 on the PXA27x which
> uses IRQ 0.
> 
> > +	/* Release IRQ */
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq != 0)
> > +		free_irq(irq, drv_data);
> 
> Similarly.

Will do.

I will re-post the patch again to today.  Thanks for the help.

-Stephen

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/