Re: SATA timeouts with Seagate disk on VIA VT6420 controller

[Nicholas Miell]

On Wed, 2006-02-15 at 21:44 -0800, Nicholas Miell wrote:
> >From time to time, I've been experiencing timeouts with my SATA disk (a
> Seagate ST3300831AS) attached to a VIA VT6420 controller on a VIA
> K8T800-based MSI motherboard. This has happened somewhat rarely on a
> variety of Fedora kernel versions.
> 
> Basically, sometimes IO will get really slow and I'll start getting
> "ata1: command 0x35 timeout, stat 0x50 host_stat 0x4" in my logs, with
> the occasional "ata1: command 0x25 timeout, stat 0x50 host_stat 0x4" and
> "ata1: command 0xb0 timeout, stat 0x50 host_stat 0x0" thrown in for good
> measure.
> 
> The disk (and/or controller) isn't unresponsive -- I can do a smartctl
> -a -d ata /dev/sda and it'll complete (eventually), and IO to the disk
> continues (very slowly), but it's generally unusable until the next
> reboot.

I actually managed to successfully unmount the filesystem and deactivate
the LVM volume group for once, which allowed me to remove and reload
sata_via, libata, sd_mod and scsi_mod.

After the drivers were reloaded, IO to the disk worked fine, which leads
me to think that sata_via and/or libata needs the ability to reset the
hardware when errors occur.

-- 
Nicholas Miell <nmiell@xxxxxxxxxxx>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/