Re: non-PCI based libata-SATA driver

[Jeff Garzik]

Deven Balani wrote:
> > If you look at http://zeniv.linux.org.uk/~alan/IDE you'll find the PATA
> > patches I did include some VLB and ISA devices.
>
> Thanks a lot. I'm going through these patches and will get back to you
> in case of any problem.
>
> I have a SATA Controller that is attached to HSX bus on ARM based
> chipset. On this side, I'm exploring the feasibilty of coming up with
> low-level libata-SATA driver (as libata is being said to support
> generic bus interface). I've gone through the SATA drivers in kernel
> code but all seem to be PCI specific.
>
> Also, Is there any slight possiblity of doing the same with 2.4.x
> kernels (by patching the kernel or whatever)?

non-PCI works quite easily under 2.6.x, because libata core uses the 
generic DMA mapping lib.  It's already confirmed to work on at least one 
other ARM embedded chipset (sorry can't give more detail).

2.4.x is a lot of work to do non-PCI, largely because you have to deal 
with the lack of a generic DMA interface.  2.4.x libata is hardcoded to 
use PCI DMA mapping.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/