[PATCH 059/141] V4L/DVB (3305): Added support for the ADS InstantTV DUO Cardbus PTV331
From: mchehab
Date: Mon Mar 20 2006 - 10:50:48 EST
From: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx>
Date: 1139302150 -0200
Analog and DVB-T are working, Remote not yet.
This card is based on the new LifeView design, there should be many variants.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
---
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 1823e4c..ee1618d 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -85,3 +85,4 @@
84 -> LifeView FlyDVB Trio [5168:0319]
85 -> AverTV DVB-T 777 [1461:2c05]
86 -> LifeView FlyDVB-T [5168:0301]
+ 87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index f469f17..d65b9dd 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2657,7 +2657,23 @@ struct saa7134_board saa7134_boards[] =
.amux = LINE2,
}},
},
-
+ [SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331] = {
+ .name = "ADS Instant TV Duo Cardbus PTV331",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x00200000,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3141,6 +3157,12 @@ struct pci_device_id saa7134_pci_tbl[] =
.subdevice = 0x0301,
.driver_data = SAA7134_BOARD_FLYDVBT_LR301,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0331,
+ .subdevice = 0x1421,
+ .driver_data = SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3263,6 +3285,10 @@ int saa7134_board_init1(struct saa7134_d
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06);
break;
+ case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+ saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
+ saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
+ break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
@@ -3413,6 +3439,14 @@ int saa7134_board_init2(struct saa7134_d
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
+ case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+ /* make the tda10046 find its eeprom */
+ {
+ u8 data[] = { 0x3c, 0x33, 0x62};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
}
return 0;
}
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index be110b8..a0c8fa3 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -846,6 +846,45 @@ static struct tda1004x_config philips_ti
.request_firmware = NULL,
};
+/* ------------------------------------------------------------------ */
+
+static int ads_duo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ int ret;
+
+ ret = philips_tda827xa_pll_set(0x61, fe, params);
+ return ret;
+};
+
+static int ads_duo_dvb_mode(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ /* route TDA8275a AGC input to the channel decoder */
+ saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60);
+ return 0;
+}
+
+static void ads_duo_analog_mode(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ /* route TDA8275a AGC input to the analog IF chip*/
+ saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20);
+ philips_tda827xa_pll_sleep( 0x61, fe);
+}
+
+static struct tda1004x_config ads_tech_duo_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .if_freq = TDA10046_FREQ_045,
+ .pll_init = ads_duo_dvb_mode,
+ .pll_set = ads_duo_pll_set,
+ .pll_sleep = ads_duo_analog_mode,
+ .request_firmware = NULL,
+};
+
#endif
/* ------------------------------------------------------------------ */
@@ -928,6 +967,10 @@ static int dvb_init(struct saa7134_dev *
dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
&dev->i2c_adap);
break;
+ case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+ dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config,
+ &dev->i2c_adap);
+ break;
#endif
#ifdef HAVE_NXT200X
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index ed556e6..4b49ee0 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -213,6 +213,7 @@ struct saa7134_format {
#define SAA7134_BOARD_FLYDVB_TRIO 84
#define SAA7134_BOARD_AVERMEDIA_777 85
#define SAA7134_BOARD_FLYDVBT_LR301 86
+#define SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331 87
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/