Linux version 2.6.15.6 (root@darkstar) (gcc version 3.3.6) #5 PREEMPT Sun Mar 19 16:25:28 BRT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data) BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 28656 pages, LIFO batch:7 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000faf50 ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x07ff0000 ACPI: FADT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x07ff0030 ACPI: DSDT (v001 ASUS K7M 0x00001000 MSFT 0x0100000b) @ 0x00000000 Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000) Built 1 zonelists Kernel command line: BOOT_IMAGE=linux26 ro root=1602 Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Detected 705.040 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 126788k/131008k available (1703k kernel code, 3724k reserved, 497k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1413.27 BogoMIPS (lpj=2826559) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 1000 (from 0c00) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-040f claimed by vt82c686 SMB Boot video device is 0000:01:05.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 8 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: efd00000-efefffff PREFETCH window: d7b00000-e7bfffff Machine check exception polling timer started. NTFS driver 2.1.25 [Flags: R/O]. io scheduler noop registered io scheduler deadline registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:04.1 PCI: Via IRQ fixup for 0000:00:04.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci0000:00:04.1 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: QUANTUM FIREBALLP LM10.2, ATA DISK drive hdb: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QUANTUM FIREBALL SE3.2A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 20066251 sectors (10273 MB) w/1900KiB Cache, CHS=19906/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hdc: max request size: 128KiB hdc: 6306048 sectors (3228 MB) w/80KiB Cache, CHS=6256/16/63, UDMA(33) hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdb: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered ip_conntrack version 2.4 (1023 buckets, 8184 max) - 212 bytes per conntrack input: AT Translated Set 2 keyboard as /class/input/input1 ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed kjournald starting. Commit interval 5 seconds Adding 124984k swap on /dev/hdc3. Priority:1 extents:1 across:124984k EXT3 FS on hdc2, internal journal Linux agpgart interface v0.101 (c) Dave Jones kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: DMA disabled ide0: reset: success savage4_smbus 0000:01:05.0: Using Savage4 at c8880000 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine III at 0xefffff00, 00:40:f4:a2:c8:fb, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 10, io base 0x0000d800 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver hiddev agpgart: Detected AMD Irongate chipset agpgart: AGP aperture is 64M @ 0xe8000000 input: Composite USB PS2 Converter USB to PS2 Adaptor v1.10 as /class/input/input2 input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor v1.10] on usb-0000:00:04.2-2 input: Composite USB PS2 Converter USB to PS2 Adaptor v1.10 as /class/input/input3 input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor v1.10] on usb-0000:00:04.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver