Re: LibPATA code issues / 2.6.15.4

[David Greaves]

David Greaves wrote:

> Mark Lord wrote:
>
>> David Greaves wrote:
>>
>>> Just FYI - I'm away (in Canada) for 2 weeks so can't do any additional
>>> testing until I return.
>>
>>
>> Am I correct, in that your last test on rc5-git4 was a failure?
>
> It was *much* better than rc4 but it did have an error.
> I *think* the problem I'm seeing is likely to be similar to the one I
> orginally reported (on 2.6.15 IIRC)
> Same sporadic warning/error which didn't usually trigger the
> raid-boot-the-disk behaviour that the FUA code seemed to.
>
>> But without the "opcode" display in the error messages,
>> so we have no idea exactly what caused the errors (again!)?
>
> Yes. I thought the/a opcode-verbose patch was in  there but I  guess not.
> I don't have remote console access to the machine so wouldn't be able
> to carry out reliable kernel tests - sorry.
> Of course I'll do this as soon as I return.

Hi

Back now :)

I've upgraded to 2.6.16 and applied your verbosity patches.

I've persuaded my array to re-assemble and during the resync I got these
messages

dmesg:
ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/04 to SCSI
SK/ASC/ASCQ 0xb/00/00
ata1: status=0x51 { DriveReady SeekComplete Error }
ata1: error=0x04 { DriveStatusError }
...(18mins later)
ata1: no sense translation for op=0x28 cmd=0x25 status: 0x51
ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/00 to SCSI
SK/ASC/ASCQ 0x3/11/04
ata1: status=0x51 { DriveReady SeekComplete Error }

smartd is not running
This did not cause the raid subsystem to boot the disk (thank goodness!)

David

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/