Re: no more interrupt load balancing

[Emmanuel Fusté]

> Hello,
>
> 2.6.13 was Nok,
> 2.6.14 was Ok,
> 2.6.15 Nok :
> efuste@rafale:~$ cat /proc/interrupts
>            CPU0       CPU1
>   0:    1046433        211    IO-APIC-edge  timer
>   1:       2778          9    IO-APIC-edge  i8042
>   2:          0          0          XT-PIC  cascade
>   3:         17          0    IO-APIC-edge  serial
>   5:          0          0    IO-APIC-edge  SoundBlaster
>   7:          1          2    IO-APIC-edge  parport0
>   8:          4          0    IO-APIC-edge  rtc
>  12:     116647          3    IO-APIC-edge  i8042
>  17:     170055          0   IO-APIC-level  eth0
>  19:     216141          1   IO-APIC-level  aic7xxx,
uhci_hcd:usb1
> NMI:          0          0
> LOC:    1046486    1046485
> ERR:          0
> MIS:          0

2.6.16 Nok:

           CPU0       CPU1
  0:     419187        103    IO-APIC-edge  timer
  1:       1932          9    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  3:         17          1    IO-APIC-edge  serial
  5:          0          0    IO-APIC-edge  SoundBlaster
  7:          2          0    IO-APIC-edge  parport0
  8:          4          0    IO-APIC-edge  rtc
 12:      22454          2    IO-APIC-edge  i8042
 16:      91690          1   IO-APIC-level  mga@pci:0000:00:0c.0
 17:       7402          0   IO-APIC-level  eth0
 19:     347961          1   IO-APIC-level  aic7xxx, uhci_hcd:usb1
NMI:          0          0
LOC:     419237     419235
ERR:          0
MIS:          0

boot log:


Accédez au courrier électronique de La Poste : www.laposte.net ; 
3615 LAPOSTENET (0,34 ?/mn) ; tél : 08 92 68 13 50 (0,34?/mn)

Attachment: log
Description: Binary data