Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
From: Alexander Samad
Date: Wed Mar 29 2006 - 20:20:39 EST
Hi
I was wondering if the patch for sata_nv to hanlde the lost interrupts
has been submitted for inclussion in the kernel.
I have sort of been following this thread, were it seems that the
interrupt problem has been fixed, but they were also going to fix the
adma problem as well.
I did a quick check of 2.6.16 changelog and see no mention for sata_nv.
I seem to suffere from this issue quite often - doing dvd burns across a
network.....
Thanks
On Mon, Mar 27, 2006 at 05:00:53PM -0500, Matt Heler wrote:
> I forgot to include this.. but here's my bios version
>
> Vendor: Phoenix Technologies, LTD
> Version: 6.00 PG
> Release Date: 06/23/2005
>
> On Monday 27 March 2006 4:46 pm, Matt Heler wrote:
> > Hey Bill,
> >
> > I spoke abit to soon though regarding that stability.. After booting up X
> > and running Azerues and kde, my system stalled and locked. However it
> > lasted much longer then Jeff's version.
> >
> > I'm running the DFI Lanparty with an Athlon 4400. I also have the following
> > setup
> >
> > 2x300gb seagate drives 7200.8 in a raid0 format with ext3
> > 2x400gb seagate drives 7200.9 again in a raid0 format with ext3
> >
> > and lspci gives me the following ::
> >
> > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
> > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev
> > a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> > (rev a3)
> >
> > On Monday 27 March 2006 11:08 am, Bill Rugolsky Jr. wrote:
> > > On Sun, Mar 26, 2006 at 08:14:35PM -0500, Matt Heler wrote:
> > > > Using Bill's original patch I was able to boot up perfectly with adma
> > > > support enabled on my workstation. Even after several stress tests (
> > > > tar -cf /dev/null . , and dd if=/dev/sda of=/dev/null ), everything
> > > > seems to be a-ok. However when I tried the sata_nv.c file that you sent
> > > > to Bill, I kept on getting hardlocks, and thus was unable to stress
> > > > test your version.
> > > >
> > > > Also for note, I heve not received any of the timeout problems reported
> > > > by Bill. Nor have I had any latency problems with adma enabled.
> > >
> > > Matt,
> > >
> > > Nice to see some value falling out of this sata_nv thread. Did you see
> > > latency problems before enabling ADMA?
> > >
> > > Would you provide some specifics on your setup?
> > >
> > > Which motherboard, #CPUs, BIOS revision, kernel, MD/LVM2/fs?
> > >
> > > On two of my Tyan S2895 machines, including the one that I'm using for
> > > testing, lspci says:
> > >
> > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
> > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> > > (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA
> > > Controller (rev f3)
> > >
> > > and dmidecode says:
> > >
> > > BIOS Information
> > > Vendor: Phoenix Technologies Ltd.
> > > Version: 2004Q3
> > > Release Date: 10/12/2005
> > >
> > > The other, where I first had lost tick problems, says:
> > >
> > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
> > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> > > (rev a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA
> > > Controller (rev a3)
> > >
> > > BIOS Information
> > > Vendor: Phoenix Technologies Ltd.
> > > Version: 2004Q3
> > > Release Date: 06/07/2005
> > >
> > >
> > > Thanks,
> > >
> > > Bill
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Attachment:
signature.asc
Description: Digital signature