Re: Lifetime of flash memory

[Sergei Organov]

linux@xxxxxxxxxxx writes:

>>> Due to the multiplexing scheme used in high-density NAND flash devices,
>>> even the non-programmed cells are exposed to a fraction of the programming
>>> voltage and there are very low limits on the number of write cycles to
>>> a page before it has to be erased again.  Exceeding that can cause some
>>> unwanted bits to change from 1 to 0.  Typically, however, it is enough
>>> to write each 512-byte portion of a page independently.
>
>> Well, I'm not sure. The Toshiba and Samsung NANDs I've read manuals for
>> seem to limit number of writes to a single page before block erase, --
>> is 512-byte portion some implementation detail I'm not aware of?
>
> No.  I just meant that I generally see "you may program each 2K page a
> maximum of 4 times before performing an erase cycle", and I assume the
> spec came from 2048/512 = 4, so you can program each 512-byte sector
> separately.

I've a file system implementation that writes up to 3 times to the first
3 bytes of the first page of a block (clearing more and more bits every
time), and it seems to work in practice, so maybe this number (4) came
from another source? Alternatively, it works by accident and then I need
to reconsider the design.

-- Sergei.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/