Re: Detecting I/O error and Halting System

[zine el abidine Hamid]

I know about smartd, but the HDD are ok.   When the
problem happen's, we have to switch off/on the servers
and then go on without any errors; The servers work's 
after that like nothing happen's...



--- Gene Heskett <gene.heskett@xxxxxxxxxxx> a écrit :

> On Tuesday 28 March 2006 10:07, zine el abidine
> Hamid wrote:
> >First of all, thank you for your analysis.
> >
> >I don't think that it's a HDD problem nor a cable
> >problem because the servers are new. We have tried
> >different HDD (seagate, maxtor) but it has not help
> >anyway.
> >It's perhaps a temperature problem but we make a
> lot
> >tests in hard condition (high temperature)
> >successfuly...
> >
> >One thinks that the problem comes from the VIA
> chipset
> >VT82c686 (it's also the opinion of Dick Johnson
> >(linux-os) whom advised me to try UDMA33 instead of
> >UDMA66).
> >
> >How can I determine the problem?
> >
> >I want to add that the HDD seems to be disconnected
> >(the BIOS can't find any drive for boot) after a
> >simple reset. We must switch off the servers to get
> >them work again.
> >However, it takes a long time (4 mounths and more)
> >before the HDD fell down. I want to work around by
> >write a module which will supervise the HDD. I know
> >how to write a module (I used the lkmpg guide
> >(http://www.tldp.org/LDP/lkmpg/) but how can I
> >shutdown Linux from inside a module...?
> >
> >best regards.
> >
> >Zine.
> 
> I take it that you are aware of a drive monitoring
> utility called 
> smartd?  By querying the drive after a new powerup,
> you may be able to 
> extract usefull information about its health.
> 
> >--- Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> a écrit :
> >> On Llu, 2006-03-27 at 16:55 +0200, zine el
> abidine
> >>
> >> Hamid wrote:
> >> > hda: status timeout: status=0xd0 { Busy }
> >>
> >> adapter
> >>
> >> > disque annonce un status busy du DMA
> >>
> >> If I'm reading the translation right then your
> hard
> >> disk decided
> >> it was busy and then never came back
> >>
> >> > Feb 12 04:46:23 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > ide0: reset: success
> >>
> >> So the IDE layer tried to reset it
> >>
> >> > Feb 12 10:22:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: timeout waiting for DMA
> >>
> >> Which didnt help
> >>
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > ide0: reset: success
> >>
> >> Still trying
> >>
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: irq timeout: status=0xd0 { Busy }
> >> >
> >> >
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: DMA disabled
> >>
> >> We gave up on DMA to see if PIO would help
> >>
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > ide0: reset timed-out, status=0x80
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: status timeout: status=0x80 { Busy }
> >> > nouvel échec de reset
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: drive not ready for command
> >> > Feb 12 10:24:47 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > ide0: reset: success
> >>
> >> And reset..
> >>
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: status timeout: status=0x80 { Busy }
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > hda: drive not ready for command
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > ide0: reset timed-out, status=0x80
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > end_request: I/O error, dev 03:02 (hda), sector
> >>
> >> 102263
> >>
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> syslogd:
> >> > /var/log/maillog: Input/output error
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > end_request: I/O error, dev 03:02 (hda), sector
> >>
> >> 110720
> >>
> >> > Feb 12 13:45:38 porte_de_clignancourt_nds_b
> >>
> >> kernel:
> >> > end_request: I/O error, dev 03:02 (hda), sector
> >>
> >> 110728
> >>
> >> Eventually we give up.
> >>
> >>
> >> First thing to check would be the disk and the
> >> temperature, then the
> >> cabling. In particular make sure the *long* part
> of
> >> the cable is between
> >> the drive and the controller.
> 
> -- 
> Cheers, Gene
> People having trouble with vz bouncing email to me
> should add the word
> 'online' between the 'verizon', and the dot which
> bypasses vz's
> stupid bounce rules.  I do use spamassassin too. :-)
> Yahoo.com and AOL/TW attorneys please note,
> additions to the above
> message by Gene Heskett are:
> Copyright 2006 by Maurice Eugene Heskett, all rights
> reserved.
> -
> To unsubscribe from this list: send the line
> "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at 
> http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 



	

	
		
___________________________________________________________________________ 
Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.
Téléchargez sur http://fr.messenger.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/