Re: [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15

[Kyle Moffett]

On Mar 31, 2006, at 20:21:15, Robert Hancock wrote:
> Kyle Moffett wrote:
> > hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
>
> Hmm, are these new? Sure you don't have a bad IDE cable?

Oh, those aren't the errors I'm worried about; I've had those for a  
while and they're harmless.  Those are due to the kernel running the  
IDE controller at a higher-than-supported speed.  It gets errors for  
a couple seconds and automatically drops the bus down to a lower and  
safer speed.  The cable's aren't bad, I've tried at least 6 different  
80-conductor cables that all work fine in other systems.  The errors  
I _am_ worried about are these:

> Mar 28 03:15:13 penelope kernel: hdi: status timeout: status=0xd0  
> { Busy }
> Mar 28 03:15:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:15:13 penelope kernel: hdi: no DRQ after issuing  
> MULTWRITE_EXT
> Mar 28 03:15:13 penelope kernel: ide4: reset: success
> Mar 28 03:30:13 penelope kernel: hdi: status timeout: status=0xd0  
> { Busy }
> Mar 28 03:30:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:30:13 penelope kernel: hdi: no DRQ after issuing  
> MULTWRITE_EXT
> Mar 28 03:30:13 penelope kernel: ide4: reset: success

Cheers,
Kyle Moffett

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/