2.6.17-rc3 PCI init hang

[Chuck Lever]

I have a dual Pentium III I use for testing.  Since late last week 
(around about 2.6.17-rc3) it hangs during boot just after "Setting up 
standard PCI resources".  2.6.17-rc2 works fine.

A push in the right direction would be appreciated.  Please reply off 
list as I'm not subscribed.

...

PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=1
Setting up standard PCI resources

>>> 2.6.17-rc3 stops here and hangs.
>>> 2.6.17-rc2 continues with:

PCI: Probing PCI hardware
PCI: Discovered peer bus 01
PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 23
PCI: Cannot allocate resource region 0 of device 0000:00:0f.2
...

lspci -v:

00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
        Flags: bus master, medium devsel, latency 32

00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
        Flags: bus master, medium devsel, latency 16

00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
(prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage XL
        Flags: bus master, stepping, medium devsel, latency 64
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at d800 [size=256]
        Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at feac0000 [disabled] [size=128K]
        Capabilities: <available only to root>

00:03.0 RAID bus controller: Promise Technology, Inc. PDC20267 
(FastTrak100/Ultra100) (rev 02)
        Subsystem: Promise Technology, Inc.: Unknown device 4d32
        Flags: bus master, medium devsel, latency 64, IRQ 31
        I/O ports at dfe0 [size=8]
        I/O ports at dfac [size=4]
        I/O ports at dfa0 [size=8]
        I/O ports at dfa8 [size=4]
        I/O ports at df00 [size=64]
        Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at feae0000 [size=64K]
        Capabilities: <available only to root>

00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
        Subsystem: Broadcom OSB4 South Bridge
        Flags: bus master, medium devsel, latency 0

00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master 
SecP PriP])
        Flags: bus master, medium devsel, latency 64
        I/O ports at ffa0 [size=16]

00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04) 
(prog-if 10 [OHCI])
        Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
        Flags: medium devsel
        Memory at 30000000 (32-bit, non-prefetchable) [size=4K]

01:03.0 Ethernet controller: Netgear GA630 Gigabit Ethernet (rev 01)
        Subsystem: Netgear GA630 Gigabit Ethernet
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 23
        Memory at febfc000 (32-bit, non-prefetchable) [size=16K]

--
corporate:	<cel at netapp dot com>
personal:	<chucklever at bigfoot dot com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/