Re: [PATCH] ide_cs: Make ide_cs work with the memory space of CF-Cardsif IO space is not available (revised)

From: Thomas Kleffel (maintech GmbH)
Date: Thu May 11 2006 - 16:33:19 EST


From: Thomas Kleffel <tk@xxxxxxxxxxx>

this patch enables ide_cs to access CF-cards via their common memory
rather than via their IO space.

Signed-off-by: Thomas Kleffel <tk@xxxxxxxxxxx>
---

This patch is against 2.6.17-rc3

The reason why this patch makes sense is that it is pretty easy to build
a CF-Interface out of a simple address/data-bus if you only use common
and attribute memory. Adding the capability to access IO space makes
things more complicated.

If you just want to use CF-Storage cards, access to common and attribute
memory is enough as the IDE registers are available there, as well.

I have submitted a patch to RMK which enables the AT91RM9200's CF
interface to work in that mode.

I made some changes based on the feedback from Alan Cox and Iain Barker.

Thomas


diff -uprN l1/drivers/ide/legacy/ide-cs.c l2/drivers/ide/legacy/ide-cs.c
--- l1/drivers/ide/legacy/ide-cs.c 2006-05-11 00:19:59.000000000 +0200
+++ l2/drivers/ide/legacy/ide-cs.c 2006-05-11 22:32:54.000000000 +0200
@@ -146,7 +146,16 @@ static void ide_detach(struct pcmcia_dev
kfree(link->priv);
} /* ide_detach */

-static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
+static void idecs_mmio_fixup(ide_hwif_t *hwif)
+{
+ default_hwif_mmiops(hwif);
+ hwif->mmio = 2;
+
+ ide_undecoded_slave(hwif);
+}
+
+static int idecs_register(unsigned long io, unsigned long ctl,
+ unsigned long irq, struct pcmcia_device *handle, int is_mmio)
{
hw_regs_t hw;
memset(&hw, 0, sizeof(hw));
@@ -154,7 +163,19 @@ static int idecs_register(unsigned long
hw.irq = irq;
hw.chipset = ide_pci;
hw.dev = &handle->dev;
- return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
+
+ if(is_mmio)
+ return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup);
+ else
+ return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
+}
+
+void outb_io(unsigned char value, unsigned long port) {
+ outb(value, port);
+}
+
+void outb_mem(unsigned char value, unsigned long port) {
+ writeb(value, (void __iomem *) port);
}

/*======================================================================
@@ -180,7 +201,8 @@ static int ide_config(struct pcmcia_devi
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
- unsigned long io_base, ctl_base;
+ unsigned long io_base, ctl_base, is_mmio;
+ void (*my_outb)(unsigned char, unsigned long);

DEBUG(0, "ide_config(0x%p)\n", link);

@@ -210,7 +232,7 @@ static int ide_config(struct pcmcia_devi
/* Not sure if this is right... look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));

- pass = io_base = ctl_base = 0;
+ pass = io_base = ctl_base = is_mmio = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -263,6 +285,33 @@ static int ide_config(struct pcmcia_devi
break;
}

+ if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
+ win_req_t req;
+ memreq_t map;
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
+
+ if (mem->win[0].len < 16)
+ goto next_entry;
+
+ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req.Attributes |= WIN_ENABLE;
+ req.Base = mem->win[0].host_addr;
+ req.Size = 16;
+
+ req.AccessSpeed = 0;
+ if (pcmcia_request_window(&link, &req, &link->win) != 0)
+ goto next_entry;
+ map.Page = 0; map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(link->win, &map) != 0)
+ goto next_entry;
+
+ io_base = (unsigned long) ioremap(req.Base, req.Size);
+ ctl_base = io_base + 0x0e;
+ is_mmio = 1;
+
+ break;
+ }
+
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
@@ -277,22 +326,27 @@ static int ide_config(struct pcmcia_devi

CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ if(is_mmio)
+ my_outb = outb_mem;
+ else
+ my_outb = outb_io;

/* disable drive interrupts during IDE probe */
- outb(0x02, ctl_base);
+ my_outb(0x02, ctl_base);

/* special setup for KXLC005 card */
if (is_kme)
- outb(0x81, ctl_base+1);
+ my_outb(0x81, ctl_base+1);

/* retry registration in case device is still spinning up */
for (hd = -1, i = 0; i < 10; i++) {
- hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio);
if (hd >= 0) break;
if (link->io.NumPorts1 == 0x20) {
- outb(0x02, ctl_base + 0x10);
+ my_outb(0x02, ctl_base + 0x10);
hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
- link->irq.AssignedIRQ, link);
+ link->irq.AssignedIRQ, link, is_mmio);
if (hd >= 0) {
io_base += 0x10;
ctl_base += 0x10;