[PATCH] fix kbuild dependencies for synclink drivers
From: Paul Fulghum
Date: Fri May 12 2006 - 11:13:59 EST
Fix kbuild dependencies for all synclink drivers
which can cause compile failures if generic HDLC
driver does not match the module/built-in status
of the dependent synclink driver. New variables
are introduced to selectively compile generic HDLC
support for individual synclink drivers with
reverse dependencies to correctly build generic HDLC.
fixes http://bugzilla.kernel.org/show_bug.cgi?id=6465 -
--- linux-2.6.16/drivers/char/Kconfig 2006-05-12 08:57:17.000000000 -0500
+++ b/drivers/char/Kconfig 2006-05-12 09:22:13.000000000 -0500
@@ -194,40 +194,56 @@
If you want to do that, choose M here.
config SYNCLINK
- tristate "Microgate SyncLink card support"
+ tristate "SyncLink PCI/ISA support"
depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ select HDLC if SYNCLINK_HDLC
help
- Provides support for the SyncLink ISA and PCI multiprotocol serial
- adapters. These adapters support asynchronous and HDLC bit
- synchronous communication up to 10Mbps (PCI adapter).
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink. If you want to do that, say M
- here.
+ Driver for SyncLink ISA and PCI synchronous serial adapters.
+ These adapters are no longer in production and have
+ been replaced by the SyncLink GT adapter.
+
+config SYNCLINK_HDLC
+ bool "Generic HDLC support for SyncLink driver"
+ depends on SYNCLINK
+ help
+ Enable generic HDLC support for the SyncLink PCI/ISA driver.
+ Generic HDLC implements multiple higher layer networking
+ protocols for use with synchronous HDLC adapters.
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
+ select HDLC if SYNCLINKMP_HDLC
help
- Enable support for the SyncLink Multiport (2 or 4 ports)
- serial adapter, running asynchronous and HDLC communications up
- to 2.048Mbps. Each ports is independently selectable for
- RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
+ Driver for SyncLink Multiport (2 or 4 ports) PCI synchronous serial adapter.
+ These adapters are no longer in production and have
+ been replaced by the SyncLink GT2 and GT4 adapters.
+
+config SYNCLINKMP_HDLC
+ bool "Generic HDLC support for SyncLink Multiport"
+ depends on SYNCLINKMP
+ help
+ Enable generic HDLC support for the SyncLink Multiport driver.
+ Generic HDLC implements multiple higher layer networking
+ protocols for use with synchronous HDLC adapters.
config SYNCLINK_GT
tristate "SyncLink GT/AC support"
depends on SERIAL_NONSTANDARD && PCI
+ select HDLC if SYNCLINK_GT_HDLC
help
Support for SyncLink GT and SyncLink AC families of
synchronous and asynchronous serial adapters
manufactured by Microgate Systems, Ltd. (www.microgate.com)
+config SYNCLINK_GT_HDLC
+ bool "Generic HDLC support for SyncLink GT/AC"
+ depends on SYNCLINK_GT
+ help
+ Enable generic HDLC support for the SyncLink GT/AC driver.
+ Generic HDLC implements multiple higher layer networking
+ protocols for use with synchronous HDLC adapters.
+
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
--- linux-2.6.16/drivers/char/pcmcia/Kconfig 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/char/pcmcia/Kconfig 2006-05-12 09:22:39.000000000 -0500
@@ -8,15 +8,17 @@
config SYNCLINK_CS
tristate "SyncLink PC Card support"
depends on PCMCIA
+ select HDLC if SYNCLINK_CS_HDLC
help
- Enable support for the SyncLink PC Card serial adapter, running
- asynchronous and HDLC communications up to 512Kbps. The port is
- selectable for RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
+ Driver for SyncLink PC Card synchronous serial adapter.
+
+config SYNCLINK_CS_HDLC
+ bool "Generic HDLC support for SyncLink Multiport"
+ depends on SYNCLINK_CS
+ help
+ Enable generic HDLC support for the SyncLink PC Card driver.
+ Generic HDLC implements multiple higher layer networking
+ protocols for use with synchronous HDLC adapters.
config CARDMAN_4000
tristate "Omnikey Cardman 4000 support"
--- linux-2.6.16/drivers/char/synclink.c 2006-03-23 14:01:29.000000000 -0600
+++ b/drivers/char/synclink.c 2006-05-12 09:36:50.000000000 -0500
@@ -103,10 +103,6 @@
#include <linux/hdlc.h>
#include <linux/dma-mapping.h>
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
-#endif
-
#define GET_USER(error,value,addr) error = get_user(value,addr)
#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
#define PUT_USER(error,value,addr) error = put_user(value,addr)
@@ -322,7 +318,7 @@
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
struct net_device *netdev;
#endif
};
@@ -730,7 +726,7 @@
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(struct mgsl_struct *info);
static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
@@ -1278,7 +1274,7 @@
info->drop_rts_on_tx_done = 0;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -1343,7 +1339,7 @@
info->input_signal_events.dcd_up++;
} else
info->input_signal_events.dcd_down++;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
if (info->netcount)
hdlc_set_carrier(status & MISCSTATUS_DCD, info->netdev);
#endif
@@ -4311,7 +4307,7 @@
info->max_frame_size );
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
hdlcdev_init(info);
#endif
@@ -4469,7 +4465,7 @@
info = mgsl_device_list;
while(info) {
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
hdlcdev_exit(info);
#endif
mgsl_release_resources(info);
@@ -6643,7 +6639,7 @@
return_frame = 1;
}
framesize = 0;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
@@ -6719,7 +6715,7 @@
*ptmp);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
if (info->netcount)
hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
else
@@ -7623,7 +7619,7 @@
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -7699,7 +7695,7 @@
return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
@@ -8116,7 +8112,7 @@
info->netdev = NULL;
}
-#endif /* CONFIG_HDLC */
+#endif /* CONFIG_SYNCLINK_HDLC */
static int __devinit synclink_init_one (struct pci_dev *dev,
--- linux-2.6.16/drivers/char/synclinkmp.c 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/char/synclinkmp.c 2006-05-12 09:37:24.000000000 -0500
@@ -68,10 +68,6 @@
#include <linux/workqueue.h>
#include <linux/hdlc.h>
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
-#endif
-
#define GET_USER(error,value,addr) error = get_user(value,addr)
#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
#define PUT_USER(error,value,addr) error = put_user(value,addr)
@@ -281,7 +277,7 @@
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
struct net_device *netdev;
#endif
@@ -537,7 +533,7 @@
static void unthrottle(struct tty_struct * tty);
static void set_break(struct tty_struct *tty, int break_state);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(SLMP_INFO *info);
static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
@@ -1608,7 +1604,7 @@
spin_unlock_irqrestore(&info->lock,flags);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
@@ -2025,7 +2021,7 @@
info->netdev = NULL;
}
-#endif /* CONFIG_HDLC */
+#endif /* CONFIG_SYNCLINKMP_HDLC */
/* Return next bottom half action to perform.
@@ -2338,7 +2334,7 @@
set_signals(info);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -2522,7 +2518,7 @@
info->input_signal_events.dcd_up++;
} else
info->input_signal_events.dcd_down++;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
if (info->netcount)
hdlc_set_carrier(status & SerialSignal_DCD, info->netdev);
#endif
@@ -3779,7 +3775,7 @@
info->irq_level,
info->max_frame_size );
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
hdlcdev_init(info);
#endif
}
@@ -3973,7 +3969,7 @@
/* release devices */
info = synclinkmp_device_list;
while(info) {
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
hdlcdev_exit(info);
#endif
free_dma_bufs(info);
@@ -4975,7 +4971,7 @@
info->icount.rxcrc++;
framesize = 0;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
@@ -5016,7 +5012,7 @@
index = 0;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
if (info->netcount)
hdlcdev_rx(info,info->tmp_rx_buf,framesize);
else
@@ -5527,7 +5523,7 @@
spin_unlock_irqrestore(&info->lock,flags);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINKMP_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
--- linux-2.6.16/drivers/char/synclink_gt.c 2006-03-24 10:23:31.000000000 -0600
+++ b/drivers/char/synclink_gt.c 2006-05-12 09:38:00.000000000 -0500
@@ -84,10 +84,6 @@
#include "linux/synclink.h"
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
-#endif
-
/*
* module identification
*/
@@ -171,7 +167,7 @@
/*
* generic HDLC support and callbacks
*/
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(struct slgt_info *info);
static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
@@ -342,7 +338,7 @@
int netcount;
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
struct net_device *netdev;
#endif
@@ -1321,7 +1317,7 @@
spin_unlock_irqrestore(&info->lock,flags);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
@@ -1734,7 +1730,7 @@
info->netdev = NULL;
}
-#endif /* ifdef CONFIG_HDLC */
+#endif /* ifdef CONFIG_SYNCLINK_GT_HDLC */
/*
* get async data from rx DMA buffers
@@ -1965,7 +1961,7 @@
} else {
info->input_signal_events.dcd_down++;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
if (info->netcount)
hdlc_set_carrier(info->signals & SerialSignal_DCD, info->netdev);
#endif
@@ -2139,7 +2135,7 @@
set_signals(info);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -3054,7 +3050,7 @@
devstr, info->device_name, info->phys_reg_addr,
info->irq_level, info->max_frame_size);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
hdlcdev_init(info);
#endif
}
@@ -3232,7 +3228,7 @@
/* release devices */
info = slgt_device_list;
while(info) {
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
hdlcdev_exit(info);
#endif
free_dma_bufs(info);
@@ -4135,7 +4131,7 @@
info->icount.rxcrc++;
framesize = 0;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
@@ -4175,7 +4171,7 @@
i = 0;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
if (info->netcount)
hdlcdev_rx(info,info->tmp_rbuf, framesize);
else
@@ -4462,7 +4458,7 @@
info->tx_count = 0;
spin_unlock_irqrestore(&info->lock,flags);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_GT_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
--- linux-2.6.16/drivers/char/pcmcia/synclink_cs.c 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/char/pcmcia/synclink_cs.c 2006-05-12 09:38:29.000000000 -0500
@@ -77,10 +77,6 @@
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
-#endif
-
#define GET_USER(error,value,addr) error = get_user(value,addr)
#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
#define PUT_USER(error,value,addr) error = put_user(value,addr)
@@ -237,7 +233,7 @@
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
struct net_device *netdev;
#endif
@@ -394,7 +390,7 @@
static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(MGSLPC_INFO *info);
static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
@@ -1096,7 +1092,7 @@
info->drop_rts_on_tx_done = 0;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -1207,7 +1203,7 @@
}
else
info->input_signal_events.dcd_down++;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
if (info->netcount)
hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, info->netdev);
#endif
@@ -2993,7 +2989,7 @@
printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n",
info->device_name, info->io_base, info->irq_level);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
hdlcdev_init(info);
#endif
}
@@ -3009,7 +3005,7 @@
last->next_device = info->next_device;
else
mgslpc_device_list = info->next_device;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
hdlcdev_exit(info);
#endif
release_resources(info);
@@ -3941,7 +3937,7 @@
return_frame = 1;
}
framesize = 0;
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
@@ -3975,7 +3971,7 @@
++framesize;
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
if (info->netcount)
hdlcdev_rx(info, buf->data, framesize);
else
@@ -4131,7 +4127,7 @@
spin_unlock_irqrestore(&info->lock,flags);
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
@@ -4139,7 +4135,7 @@
bh_transmit(info);
}
-#ifdef CONFIG_HDLC
+#ifdef CONFIG_SYNCLINK_CS_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
@@ -4556,5 +4552,5 @@
info->netdev = NULL;
}
-#endif /* CONFIG_HDLC */
+#endif /* CONFIG_SYNCLINK_CS_HDLC */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/