Re: Updated libata PATA patch

[Guennadi Liakhovetski]

On Tue, 9 May 2006, Alan Cox wrote:

> - Re-enable per device speed setting
> - Fix VIA cable detect bug  (reporter: Mathieu Castet)
> - Fix AMD cable detect bug  (reporter: Sangoi Leonard)
> - Fix CS5535 build (reporter: Meelis Roos)
> - Trap 0 IRQ case
> - Fix IRQ allocation for pata_pcmcia (reporter: Kevin Radloff)
> 
> http://zeniv.linux.org.uk/~alan/IDE

Just a little thank-you  - just booted with your patch a ppc machine with 
a "IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) 
PCI0680 Ultra ATA-133 Host Controller (rev 02)" controller, kernel 
2.6.17-rc3, your patch patch-2.6.17-rc3-ide2. An extract from dmesg:

sil680: BA5_EN = 1 clock = 00
sil680: BA5_EN = 1 clock = 10
sil680: 133MHz clock.
ata1: PATA max UDMA/133 cmd 0xBFFEF8 ctl 0xBFFEF6 bmdma 0xBFFED0 irq 17
ata2: PATA max UDMA/133 cmd 0xBFFEE8 ctl 0xBFFEE6 bmdma 0xBFFED8 irq 17
ata1: dev 0 ATA-6, max UDMA/100, 40020624 sectors: LBA
ata1: dev 0 configured for UDMA/100
scsi0 : pata_sil680
scsi1 : pata_sil680
  Vendor: ATA       Model: Maxtor 2B020H1    Rev: WAH2
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 40020624 512-byte hdwr sectors (20491 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 40020624 512-byte hdwr sectors (20491 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0

Will see how well it survives:-)

Thanks
Guennadi
---
Guennadi Liakhovetski
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/