Re: rt20 scheduling latency testcase and failure data

[Darren Hart]

> > > On Saturday 13 May 2006 11:21, Lee Revell wrote:
> > If you disable printf + fflush in iterations loop, problem goes away?

Unfortunately not, after disabling the printf and fflush, my very first run 
resulted in:

ITERATION 0
-------------------------------
Scheduling Latency
-------------------------------

Running 10000 iterations with a period of 5 ms
Expected running time: 50 s

ITERATION DELAY(US) MAX_DELAY(US) FAILURES
--------- --------- ------------- --------


PERIOD MISSED!
     scheduled delta:     4078 us
        actual delta:    14213 us
             latency:    10135 us
---------------------------------------
      previous start: 42050139 us
                 now: 42051059 us
     scheduled start: 42045000 us
next scheduled start is in the past!


Start Latency:   99 us: PASS
Min Latency:      8 us: PASS
Avg Latency:      8 us: PASS
Max Latency:   10139 us: FAIL


> P.S.
>
> I think it probably will, because...
>
> sched_latency [ea53a0b0]D 00000001     0  8261   7858                8260
> (NOTLB) e29a0e70 e29a0e58 00000008 00000001 df6158e0 00000000 623266f4
> 0000017d b23d45c4 efd53870 dfcb8dc0 efd53870 00000000 000011e6 ea53a1e8
> ea53a0b0 efdf0d30 b2454560 623e5018 0000017d 00000001 efdf0d30 00000100
> 00000000 Call Trace:
>  [<b1038454>] __rt_mutex_adjust_prio+0x1f/0x24 (112)
>  [<b1038ad8>] task_blocks_on_rt_mutex+0x1b6/0x1c9 (16)
>  [<b13bfeb1>] schedule+0x34/0x10b (24)
>  [<b13c0963>] rt_mutex_slowlock+0xc7/0x258 (28)
>  [<b13c0bb6>] rt_mutex_lock+0x3f/0x43 (100)
>  [<b1039075>] rt_down+0x12/0x32 (20)
>  [<b13c14a7>] lock_kernel+0x1d/0x23 (16)
>  [<b1228246>] tty_write+0x119/0x21b (12)
>  [<b122b758>] write_chan+0x0/0x338 (24)
>  [<b10352bd>] hrtimer_wakeup+0x0/0x1c (20)
>  [<b10671f0>] vfs_write+0xc1/0x19b (24)
>  [<b1067bfa>] sys_write+0x4b/0x74 (40)
>  [<b1002eeb>] sysenter_past_esp+0x54/0x75 (40)
>

What is it about this dump that made you suspect the printf?  Or was it just 
that printing the trace seemed to trigger a failure - so it seemed reasonable 
that the process may have been blocked on writing to the console?  I could 
see that causing a failure like the one below, but not like the one I posted 
above.  (The one above has no printfs between the time measurements 
surrounding the clock_nanosleep() call and it overslept by 10ms).  Also, 
shouldn't I have seen something in the oprofile reports I posted earlier if 
the printf was causing the latencies?

Thanks for the comments, thoughts, and suggestions.

> ...generated via SysRq-T, induces...
>
> PERIOD MISSED!
>      scheduled delta:     4964 us
>         actual delta:     4974 us
>              latency:       10 us
> ---------------------------------------
>       previous start:  1750012 us
>                  now: 13122245 us
>      scheduled start:  1755000 us
> next scheduled start is in the past!

-- 
Darren Hart
IBM Linux Technology Center
Realtime Linux Team
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/