RE: [PATCH 1/1] scsi : megaraid_{mm,mbox}: a fix on 64-bit DMA capability check

[Ju, Seokmann]

Hi Vasily,

Tuesday, June 20, 2006 9:53 AM, Vasily Averin wrote:
> As far as I see the 64-bit magic is set, pci(0xA4) == 0x0299 
> and driver tries to
> enable 64-bit DMA. However the controller is not supported 
> 64-bit DMA, and I
> still have the same error messages.
> 
> Could you please check this issue and update your patch properly.
I'll double check with F/W team for further clarification and will submit updated patch, soon.
Thank you for pointing out and sorry for inconvenience.

Seokmann

> -----Original Message-----
> From: Vasily Averin [mailto:vvs@xxxxx] 
> Sent: Tuesday, June 20, 2006 9:53 AM
> To: Ju, Seokmann
> Cc: James Bottomley; Andrew Morton; 
> linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; 
> devel@xxxxxxxxxx
> Subject: Re: [PATCH 1/1] scsi : megaraid_{mm,mbox}: a fix on 
> 64-bit DMA capability check
> 
> Hello Seokmann,
> 
> I would like to tell you that your patch is wrong, at least for
>  MegaRAID SATA 150-4 RAID Controller
> 
> 06:02.0 RAID bus controller: LSI Logic / Symbios Logic 
> MegaRAID (rev 01)
>         Subsystem: LSI Logic / Symbios Logic MegaRAID SATA 
> 150-4 RAID Controller
> 00: 00 10 60 19 16 03 b0 04 01 00 04 01 08 20 00 00
> 10: 08 00 20 df 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 23 45
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 ff ff 00 00 00 d0 08 00 00 fc 00 00 00 fc
> 50: 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 88 1f 00 00 00 00 00 f8 00 00 00 00
> 70: 00 00 00 00 00 00 ff ff 00 00 f4 fe 00 00 00 00
> 80: 01 00 02 00 00 00 00 00 06 01 38 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 06 01 00 20 9c 00 00 00
> a0: cc cc 00 00 99 02 00 00 00 06 00 80 00 00 00 00
> b0: 00 00 00 6e 00 00 00 00 00 00 00 00 fd 01 00 00
> c0: fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 
> As far as I see the 64-bit magic is set, pci(0xA4) == 0x0299 
> and driver tries to
> enable 64-bit DMA. However the controller is not supported 
> 64-bit DMA, and I
> still have the same error messages.
> 
> Could you please check this issue and update your patch properly.
> 
> Thank you,
> 	Vasily Averin
> 
> SWsoft Virtuozzo/OpenVZ Linux kernel team
> 
> Ju, Seokmann wrote:
> > Hi,
> > 
> > This patch contains a fix for 64-bit DMA capability check in
> > megaraid_{mm,mbox} driver. With patch, the driver access PCI
> > configuration space with dedicated offset to read a 
> signature. If the
> > signature read, it means that the controller has capability 
> to handle
> > 64-bit DMA. Before this patch, the driver blindly claimed 
> the capability
> > without checking with controller.
> > The issue has been reported by Vasily Averin [vvs@xxxxx]. Thank you
> > Vasily for the reporting.
> 
> > +#define HBA_SIGNATURE_64BIT		0x0299
> > +#define PCI_CONF_AMISIG64		0xa4
> ...
> > -	if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) {
> > +	pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64,
> > &magic64);
> >  
> > -		con_log(CL_ANN, (KERN_WARNING
> > -			"megaraid: could not set DMA mask for
> > 64-bit.\n"));
> > +	if ((magic64 == HBA_SIGNATURE_64BIT) || 
> > +		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
> > +		adapter->pdev->device ==
> > PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
> > +		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
> > +		adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
> > +		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
> > +		adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
> > +		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
> > +		adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)
> > ||
> > +		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
> > +		adapter->pdev->device == PCI_DEVICE_ID_LINDSAY)) {
> > +		if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) !=
> > 0) {
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/