Re: Geode patches for 2.6.17
From: Jordan Crouse
Date: Fri Jun 23 2006 - 16:50:10 EST
>Please consider pulling from:
>git://git.infradead.net/users/jcrouse/geode.git linus-upstream
>
>This is the new home for patches for the AMD Geode family of processors.
As Jeff Garzik and others have pointed out, I failed to attach neither
a diffstat nor a patch, so allow me to rectify that now.
Jordan
arch/i386/Kconfig | 9 +++++++++
arch/i386/boot/setup.S | 5 +++++
drivers/video/Kconfig | 6 +++---
drivers/video/console/Kconfig | 4 ++--
drivers/video/geode/Kconfig | 20 ++++++++++++++++++++
drivers/video/geode/display_gx.c | 22 +++++++++++++++++++---
drivers/video/geode/display_gx.h | 3 ++-
drivers/video/geode/gxfb_core.c | 8 +++++++-
drivers/video/geode/video_gx.c | 24 +++++++++++++++++++++++-
drivers/video/geode/video_gx.h | 7 +++++++
include/linux/pci_ids.h | 5 ++---
11 files changed, 99 insertions(+), 14 deletions(-)
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 8dfa305..b6abc74 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -708,6 +708,15 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
+config VGA_NOPROBE
+ bool "Don't probe VGA at boot" if EMBEDDED
+ default n
+ help
+ Saying Y here will cause the kernel to not probe VGA at boot time.
+ This will break everything that depends on the probed screen
+ data. Say N here unless you are absolutely sure this is what you
+ want.
+
source kernel/Kconfig.hz
config KEXEC
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
index ca668d9..9c06c84 100644
--- a/arch/i386/boot/setup.S
+++ b/arch/i386/boot/setup.S
@@ -395,10 +395,13 @@ # Set the keyboard repeat rate to the ma
xorw %bx, %bx
int $0x16
+#ifndef CONFIG_VGA_NOPROBE
+
# Check for video adapter and its parameters and allow the
# user to browse video modes.
call video # NOTE: we need %ds pointing
# to bootsector
+#endif
# Get hd0 data...
xorw %ax, %ax
@@ -1007,9 +1010,11 @@ gdt_48:
.word gdt_end - gdt - 1 # gdt limit
.word 0, 0 # gdt base (filled in later)
+#ifndef CONFIG_VGA_NOPROBE
# Include video setup & detection code
#include "video.S"
+#endif
# Setup signature -- must be last
setup_sig1: .word SIG1
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4587087..e65a492 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -473,7 +473,7 @@ config FB_TGA
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -743,7 +743,7 @@ config FB_I810_I2C
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
+ depends on FB && EXPERIMENTAL && PCI && X86_32 && !VGA_NOPROBE
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -1050,7 +1050,7 @@ config FB_SAVAGE_ACCEL
config FB_SIS
tristate "SiS/XGI display support"
- depends on FB && PCI
+ depends on FB && PCI && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 4444bef..0be8e3b 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -5,8 +5,8 @@ #
menu "Console display driver support"
config VGA_CONSOLE
- bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE
+ bool "VGA text console" if (EMBEDDED || !X86)
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !VGA_NOPROBE
default y
help
Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/geode/Kconfig b/drivers/video/geode/Kconfig
index 4e173ef..5704879 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/geode/Kconfig
@@ -23,6 +23,26 @@ config FB_GEODE_GX
If unsure, say N.
+config FB_GEODE_GX_SET_FBSIZE
+ bool "Manually specify the Geode GX framebuffer size"
+ depends on FB_GEODE_GX
+ default n
+ ---help---
+ If you want to manually specify the size of your GX framebuffer,
+ say Y here, otherwise say N to dynamically probe it.
+
+ Say N unless you know what you are doing.
+
+config FB_GEODE_GX_FBSIZE
+ hex "Size of the GX framebuffer, in bytes"
+ depends on FB_GEODE_GX_SET_FBSIZE
+ default "0x1600000"
+ ---help---
+ Specify the size of the GX framebuffer. Normally, you will
+ want this to be MB aligned. Common values are 0x80000 (8MB)
+ and 0x1600000 (16MB). Don't change this unless you know what
+ you are doing
+
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
depends on FB && FB_GEODE && EXPERIMENTAL
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
index 825c340..7faf62a 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/geode/display_gx.c
@@ -21,11 +21,26 @@ #include <asm/delay.h>
#include "geodefb.h"
#include "display_gx.h"
-int gx_frame_buffer_size(void)
+#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+unsigned int gx_frame_buffer_size(void) {
+ return CONFIG_FB_GEODE_GX_FBSIZE;
+}
+#else
+unsigned int gx_frame_buffer_size(void)
{
- /* Assuming 16 MiB. */
- return 16*1024*1024;
+ unsigned int val;
+
+ /* FB size is reported by a virtual register */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+
+ outw(0xFC53, 0xAC1C);
+ outw(0x0200, 0xAC1C);
+
+ val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ return (val << 19);
}
+#endif
int gx_line_delta(int xres, int bpp)
{
@@ -81,6 +96,7 @@ static void gx_set_mode(struct fb_info *
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
+
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 86c6233..e962c76 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -11,7 +11,7 @@
#ifndef __DISPLAY_GX_H__
#define __DISPLAY_GX_H__
-int gx_frame_buffer_size(void);
+unsigned int gx_frame_buffer_size(void);
int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
@@ -93,4 +93,5 @@ #define DC_V_SYNC_TIMING 0x58
#define DC_PAL_ADDRESS 0x70
#define DC_PAL_DATA 0x74
+#define DC_GLIU0_MEM_OFFSET 0x84
#endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 89c34b1..61cecbe 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -241,6 +241,12 @@ static int __init gxfb_map_video_memory(
if (!info->screen_base)
return -ENOMEM;
+ /* Set the 16MB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);
@@ -384,7 +390,7 @@ static void gxfb_remove(struct pci_dev *
}
static struct pci_device_id gxfb_id_table[] = {
- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_VIDEO,
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
0xff0000, 0 },
{ 0, }
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 2b2a788..616ce33 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -178,7 +178,21 @@ static void gx_set_dclk_frequency(struct
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, fp_pm, misc;
+
+ /* Set up the MISC register */
+
+ misc = readl(par->vid_regs + GX_MISC);
+
+ /* Power up the DAC */
+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+ /* Disable gamma correction */
+ misc |= GX_MISC_GAM_EN;
+
+ writel(misc, par->vid_regs + GX_MISC);
+
+ /* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
@@ -199,9 +213,17 @@ static void gx_configure_display(struct
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ /* Enable the display logic */
+ /* Set up the DACS to blank normally */
+
+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+ /* Enable the external DAC VREF? */
+
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on flat panel. */
+
fp_pm = readl(par->vid_regs + GX_FP_PM);
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 2d9211f..238181a 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -28,6 +28,13 @@ # define GX_DCFG_VG_CK 0x00100000
# define GX_DCFG_GV_GAM 0x00200000
# define GX_DCFG_DAC_VREF 0x04000000
+/* Geode GX MISC video configuration */
+
+#define GX_MISC 0x50
+#define GX_MISC_GAM_EN 0x00000001
+#define GX_MISC_DAC_PWRDN 0x00000400
+#define GX_MISC_A_PWRDN 0x00000800
+
/* Geode GX flat panel display control registers */
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 590dc6d..289a4f8 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -387,7 +387,7 @@ #define PCI_DEVICE_ID_NS_CS5535_ISA 0x00
#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e
#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f
-#define PCI_DEVICE_ID_NS_CS5535_VIDEO 0x0030
+#define PCI_DEVICE_ID_NS_GX_VIDEO 0x0030
#define PCI_DEVICE_ID_NS_SATURN 0x0035
#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500
#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501
@@ -400,8 +400,7 @@ #define PCI_DEVICE_ID_NS_SC1100_SMI 0x05
#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
#define PCI_DEVICE_ID_NS_87410 0xd001
-#define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE 0x0028
-#define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE 0x002b
+#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE 0x0028
#define PCI_VENDOR_ID_TSENG 0x100c
#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202