Re: PATA driver patch for 2.6.17

[Kevin Radloff]

On 6/19/06, Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> wrote:
> http://zeniv.linux.org.uk/~alan/IDE
>
> This is basically a resync versus 2.6.17, the head of the PATA tree is
> now built against Jeffs tree with revised error handling and the like.
>
> Alan

Hrm, I finally tried a different CF card (Viking 256MB) from the one I
usually use in my camera, and it failed to work:

pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
ata6: PATA max PIO0 cmd 0x3100 ctl 0x310E bmdma 0x0 irq 3
ata6: dev 0 cfg 49:0200 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata6: dev 0 ATA-0, max PIO0, 500736 sectors: LBA
ata6: failed to set xfermode (err_mask=0x1)
scsi6 : pata_pcmcia

Here's me sticking in my Sandisk Ultra II 1GB CF card and it working
immediately after:

pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
ata7: PATA max PIO0 cmd 0x3100 ctl 0x310E bmdma 0x0 irq 3
ata7: dev 0 cfg 49:0200 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata7: dev 0 ATA-10, max PIO4, 2001888 sectors: LBA
ata7: dev 0 configured for PIO0
scsi7 : pata_pcmcia
 Vendor: ATA       Model: SanDisk SDCFH-10  Rev: HDX
 Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
sdb: sdb1
sd 7:0:0:0: Attached scsi removable disk sdb
sd 7:0:0:0: Attached scsi generic sg2 type 0

--
Kevin 'radsaq' Radloff
radsaq@xxxxxxxxx
http://thesaq.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/