[RFC][patch 30/44] ide: Use the new IRQF_ constansts
From: Thomas Gleixner
Date: Sat Jul 01 2006 - 11:09:09 EST
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
drivers/ide/ide-probe.c | 10 +++++-----
drivers/ide/legacy/hd.c | 4 ++--
2 files changed, 7 insertions(+), 7 deletions(-)
Index: linux-2.6.git/drivers/ide/ide-probe.c
===================================================================
--- linux-2.6.git.orig/drivers/ide/ide-probe.c 2006-07-01 16:51:19.000000000 +0200
+++ linux-2.6.git/drivers/ide/ide-probe.c 2006-07-01 16:51:40.000000000 +0200
@@ -1004,7 +1004,7 @@ static int ide_init_queue(ide_drive_t *d
* and irq serialization situations. This is somewhat complex because
* it handles static as well as dynamic (PCMCIA) IDE interfaces.
*
- * The SA_INTERRUPT in sa_flags means ide_intr() is always entered with
+ * The IRQF_DISABLED in sa_flags means ide_intr() is always entered with
* interrupts completely disabled. This can be bad for interrupt latency,
* but anything else has led to problems on some machines. We re-enable
* interrupts as much as we can safely do in most places.
@@ -1090,15 +1090,15 @@ static int init_irq (ide_hwif_t *hwif)
* Allocate the irq, if not already obtained for another hwif
*/
if (!match || match->irq != hwif->irq) {
- int sa = SA_INTERRUPT;
+ int sa = IRQF_DISABLED;
#if defined(__mc68000__) || defined(CONFIG_APUS)
- sa = SA_SHIRQ;
+ sa = IRQF_SHARED;
#endif /* __mc68000__ || CONFIG_APUS */
if (IDE_CHIPSET_IS_PCI(hwif->chipset)) {
- sa = SA_SHIRQ;
+ sa = IRQF_SHARED;
#ifndef CONFIG_IDEPCI_SHARE_IRQ
- sa |= SA_INTERRUPT;
+ sa |= IRQF_DISABLED;
#endif /* CONFIG_IDEPCI_SHARE_IRQ */
}
Index: linux-2.6.git/drivers/ide/legacy/hd.c
===================================================================
--- linux-2.6.git.orig/drivers/ide/legacy/hd.c 2006-07-01 16:51:19.000000000 +0200
+++ linux-2.6.git/drivers/ide/legacy/hd.c 2006-07-01 16:51:40.000000000 +0200
@@ -691,7 +691,7 @@ static struct block_device_operations hd
};
/*
- * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags
+ * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags
* means we run the IRQ-handler with interrupts disabled: this is bad for
* interrupt latency, but anything else has led to problems on some
* machines.
@@ -806,7 +806,7 @@ static int __init hd_init(void)
p->cyl, p->head, p->sect);
}
- if (request_irq(HD_IRQ, hd_interrupt, SA_INTERRUPT, "hd", NULL)) {
+ if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) {
printk("hd: unable to get IRQ%d for the hard disk driver\n",
HD_IRQ);
goto out1;
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/