Re: USB input ati_remote autorepeat problem

From: Marko Macek
Date: Sun Jul 02 2006 - 14:37:53 EST


Vojtech Pavlik wrote:
On Tue, Jun 27, 2006 at 02:46:39PM -0700, Nish Aravamudan wrote:
On 6/27/06, Marko Macek <Marko.Macek@xxxxxxx> wrote:
Hello!

I have problems with autorepeat in ati_remote (drivers/usb/input) driver
in "recent" kernels: all keys start repeating immediately without some
delay.

This makes some things, like changing the channel prev/next or toggling
fullscreen, etc... impossible/hard.

The problem seems to be related to FILTER_TIME and HZ=250 (which I
forgot to change).

FILTER_TIME is defined to HZ / 20, and since 250 is not divisible by 20,
the time will be too short to ignore enough events.

Defining FILTER_TIME to HZ / 20 + 1 seems to fix things, but I'm not
sure if there are any bad side effects.
Can you try just defining it to msecs_to_jiffies(50)? That should
handle the various HZ cases just fine.
Indeed, that would be thr right solution. Even better would be to

#define FILTER_TIME 50 /* 50 msec */

and later use

msecs_to_jiffies(FILTER_TIME)

in the code.
There is still a problem (reproducible in HZ=100, at least), because msec_to_jiffies

#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);

Calculates 5 ticks for 50ms, which might seem to be correct, but it really isn't, since 5 ticks can happen in as little as 40 (+eps) ms.

I wonder if this usage of msec_to_jiffies is correct (seems wrong to me).

A working (but not clean) patch might look like this:

--- linux-2.6.17.orig/drivers/usb/input/ati_remote.c 2006-06-29 21:18:15.000000000 +0200

+++ linux-2.6.17/drivers/usb/input/ati_remote.c 2006-07-02 20:10:17.000000000 +0200

@@ -155,9 +155,8 @@

* events. The hardware generates 5 events for the first keypress

* and we have to take this into account for an accurate repeat

* behaviour.

- * (HZ / 20) == 50 ms and works well for me.

*/

-#define FILTER_TIME (HZ / 20)

+#define FILTER_TIME 51 /* msec */



struct ati_remote {

struct input_dev *idev;

@@ -470,7 +469,7 @@

/* Filter duplicate events which happen "too close" together. */

if ((ati_remote->old_data[0] == data[1]) &&

(ati_remote->old_data[1] == data[2]) &&

- time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) {

+ time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(FILTER_TIME))) {

ati_remote->repeat_count++;

} else {

ati_remote->repeat_count = 0;


Some googling reveals that an old patch used HZ >> 4 (HZ / 16) instead of HZ / 20;

Perhaps using msec_to_jiffies(50) + 1 would be the correct fix?

Mark

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/