Re: 2.6.17-mm4 raid bugs & traces
From: Helge Hafting
Date: Sun Jul 02 2006 - 14:48:39 EST
On Sun, Jul 02, 2006 at 05:38:40PM +1200, Reuben Farrelly wrote:
> On 2/07/2006 4:25 a.m., Helge Hafting wrote:
> >More mm4 raid-1 troubles.
>
> >More than a little irritating, I need the SATA raid-1 to be in sync
> >so lilo can install mm5 for me. 18 hours.
>
> Have you looked at enabling write-intent bitmaps on your raid-1 arrays?
>
Didn't know about those. I solved this by rebooting into
2.6.16-rc6-mm2, where the resync is one hour. 2.6.15 must have bad
SATA drivers.
> With all the grief I have been having with RAID-1 recently, bitmaps have
> saved me very very serious amounts of time resyncing the array.
>
> Typically after my raid array has had devices/partitions kicked out (such
> as when loading -mm5) it takes only 2-3 seconds to bring each non-fresh
> device/partition back into the array and back up to sync (as opposed to 18
> hours...).
>
> Neil wrote a good posting at http://lkml.org/lkml/2005/12/4/118 about it
> (which should be a FAQ entry in itself).
Thanks for the tip. I now have write intent bitmaps enabled on all
my arrays.
Helge Hafitng
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/