Re: 2.6.17.2 + libata + pata_ali - interminnent can't resume after STR

From: Andrey Borzenkov
Date: Tue Jul 04 2006 - 14:52:31 EST

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 03 July 2006 11:22, Andrey Borzenkov wrote:
> 2.6.17.2, libata for 2.6.17 from Tejun Heo
> (http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.17-20060625.tar.bz
>2), pata_ali from Jeff Garzik tree patched to add parameter to set transfer
> mask for ATAPI (as already posted it does not detect CD-ROM in DMA so I
> clamp it to PIO4). System - TOSHIBA Portege 4000.
>
> Several times after switching to libata system hung on resume from suspend
> to RAM. It is stuck attempting to initialize hard drive and doing recovery
> in loop.
>
> Unfortunately this notebook does not have any serial port so it is somewhat
> hard capture any console output during resume.
>

Well, I now had one case where it silently remounted root ro without leaving
any trace in dmesg; and one case where it recovered after some attempt. Here
is dmesg from the latter:

pccard: card ejected from slot 0
Stopping tasks:
=============================================================================|
pnp: Device 00:09 disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
BUG: sleeping function called from invalid context at
include2/asm/semaphore.h:99
in_atomic():0, irqs_disabled():1
<c010405d> show_trace+0xd/0x10 <c0104607> dump_stack+0x17/0x20
<c0115f78> __might_sleep+0xa8/0xc0 <c01d4d73>
acpi_os_wait_semaphore+0x65/0xbb
<c01ea55e> acpi_ut_acquire_mutex+0x35/0x73 <c01e0c22>
acpi_set_register+0x5a/0x16e
<c01d925f> acpi_clear_event+0x25/0x2b <c01eabd7> acpi_pm_enter+0x93/0xb8
<c013603c> suspend_enter+0x4c/0x60 <c0136110> enter_state+0xc0/0x170
<c0136266> state_store+0xa6/0xb0 <c0196f8b> subsys_attr_store+0x2b/0x40
<c01972a3> sysfs_write_file+0xa3/0x100 <c015dfd9> vfs_write+0x99/0x160
<c015e5fd> sys_write+0x3d/0x70 <c0102f1b> sysenter_past_esp+0x54/0x75
Back to C!
BUG: sleeping function called from invalid context
at /home/bor/src/linux-git/mm/slab.c:2793
in_atomic():0, irqs_disabled():1
<c010405d> show_trace+0xd/0x10 <c0104607> dump_stack+0x17/0x20
<c0115f78> __might_sleep+0xa8/0xc0 <c015a269> kmem_cache_alloc+0x59/0x70
<c01d4733> acpi_os_acquire_object+0xe/0x3c <c01ea211>
acpi_ut_allocate_object_desc_dbg+0x13/0x45
<c01ea25b> acpi_ut_create_internal_object_dbg+0x18/0x6a <c01e62aa>
acpi_rs_set_srs_method_data+0x3a/0xaa
<c01e5c82> acpi_set_current_resources+0x1b/0x24 <c01ed8a9>
acpi_pci_link_set+0xfb/0x174
<c01ed959> irqrouter_resume+0x37/0x56 <c0211844> __sysdev_resume+0x14/0x80
<c0211a87> sysdev_resume+0x57/0x90 <c0216d38> device_power_up+0x8/0x10
<c0136043> suspend_enter+0x53/0x60 <c0136110> enter_state+0xc0/0x170
<c0136266> state_store+0xa6/0xb0 <c0196f8b> subsys_attr_store+0x2b/0x40
<c01972a3> sysfs_write_file+0xa3/0x100 <c015dfd9> vfs_write+0x99/0x160
<c015e5fd> sys_write+0x3d/0x70 <c0102f1b> sysenter_past_esp+0x54/0x75
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) ->
IRQ 11
PM: Writing back config space on device 0000:00:02.0 at offset f (was
500001ff, writing 5000010b)
ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
PM: Writing back config space on device 0000:00:06.0 at offset f (was
180201ff, writing 1802010b)
PM: Writing back config space on device 0000:00:0a.0 at offset f (was
380801ff, writing 3808010b)
PM: Writing back config space on device 0000:00:10.0 at offset 6 (was 50200,
writing b0050200)
PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100003,
writing 2100007)
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
eth0: PRI 31 variant 2 version 9.48
eth0: NIC 5 variant 2 version 1.02
eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C
PM: Writing back config space on device 0000:00:11.0 at offset 1 (was 4900003,
writing 4900007)
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 4900003,
writing 4900007)
ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
PM: Writing back config space on device 0000:00:12.0 at offset f (was 1ff,
writing 10b)
PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff,
writing 10b)
pnp: Failed to activate device 00:05.
pnp: Failed to activate device 00:06.
pnp: Device 00:09 activated.
usb usb1: root hub lost power or was reset
Restarting tasks...<4>ATA: abnormal status 0x80 on port 0x1F7
ATA: abnormal status 0x80 on port 0x1F7
ATA: abnormal status 0x80 on port 0x1F7
done
ATA: abnormal status 0xD0 on port 0x1F7
ReiserFS: warning: is_tree_node: node level 0 does not match to the expected
one 1
ReiserFS: sda2: warning: vs-5150: search_by_key: invalid format found in block
2722987. Fsck?
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: (BMDMA stat 0xa4)
ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/33
ata1: EH complete
SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back

thank you

> I have been using STR with legacy IDE drivers without any problems so far.
> Any idea how to debug it welcome.
>
> Thank you
>
> -andrey
>
> {pts/0}% sudo lspci -vvv
> 00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev
> 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR+
> Latency: 0
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [b0] AGP version 2.0
> Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
> Capabilities: [a4] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: f7f00000-fdffffff
> Prefetchable memory behind bridge: 3c000000-3c0fffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR+
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems Unknown device 0004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f7eff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if f0)
> Subsystem: Toshiba America Info Systems Unknown device 0004
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 1000ns max)
> Interrupt: pin A routed to IRQ 255
> Region 4: I/O ports at eff0 [size=16]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
> Controller Audio Device (rev 01)
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR+ <PERR+
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at ed00 [size=256]
> Region 1: Memory at f7efe000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin
> IV/V/V+]
> Subsystem: Toshiba America Info Systems Unknown device 0004
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [a0] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:0a.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
> (rev 08)
> Subsystem: Toshiba America Info Systems 8255x-based Fast Ethernet
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f7efd000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at eb40 [size=64]
> Region 2: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 00:10.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
> Controller (rev 01)
> Subsystem: Lucent Technologies Unknown device ab01
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 3c100000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
> Memory window 0: 30000000-31fff000 (prefetchable)
> Memory window 1: 32000000-33fff000
> I/O window 0: 00001000-000010ff
> I/O window 1: 00001400-000014ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt-
> PostWrite+ 16-bit legacy interface ports at 0001
>
> 00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
> Cardbus Bridge with ZV Support (rev 32)
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 3c101000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
> Memory window 0: 34000000-35fff000 (prefetchable)
> Memory window 1: 36000000-37fff000
> I/O window 0: 00001800-000018ff
> I/O window 1: 00001c00-00001cff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
> PostWrite+ 16-bit legacy interface ports at 0001
>
> 00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
> Cardbus Bridge with ZV Support (rev 32)
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at 3c102000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=0a, subordinate=0d, sec-latency=0
> Memory window 0: 38000000-39fff000 (prefetchable)
> Memory window 1: 3a000000-3bfff000
> I/O window 0: 00002000-000020ff
> I/O window 1: 00002400-000024ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
> PostWrite+ 16-bit legacy interface ports at 0001
>
> 00:12.0 System peripheral: Toshiba America Info Systems SD TypA Controller
> (rev 03)
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f7cffe00 (32-bit, non-prefetchable) [size=512]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1
> (rev 82) (prog-if 00 [VGA])
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 8
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M]
> Region 1: Memory at fbc00000 (32-bit, non-prefetchable) [size=4M]
> Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
> Region 3: Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K]
> [virtual] Expansion ROM at 3c000000 [disabled] [size=64K]
> Capabilities: [80] AGP version 2.0
> Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
> Capabilities: [90] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> {pts/0}%
> Linux version 2.6.17.2-1avb (bor@cooker) (gcc version 4.1.1 20060518
> (prerelease)) #26 Fri Jun 30 12:51:27 MSD 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
> BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
> BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ef60000 (usable)
> BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
> BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 495MB LOWMEM available.
> On node 0 totalpages: 126816
> DMA zone: 4096 pages, LIFO batch:0
> Normal zone: 122720 pages, LIFO batch:31
> DMI 2.3 present.
> ACPI: RSDP (v000 TOSHIB ) @ 0x000f0090
> ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60000
> ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60054
> ACPI: DSDT (v001 TOSHIB 4000 0x20020417 MSFT 0x0100000a) @ 0x00000000
> ACPI: PM-Timer IO Port: 0xee08
> Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
> Built 1 zonelists
> Kernel command line: root=/dev/sda2 resume=/dev/sda1 elevator=cfq vga=791
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> mapped APIC to ffffd000 (013e4000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Detected 747.720 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 499052k/507264k available (1667k kernel code, 7648k reserved, 799k
> data, 180k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok. Calibrating delay using timer specific routine.. 1496.76 BogoMIPS
> (lpj=748383) Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU serial number disabled.
> CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Pentium III (Coppermine) stepping 0a
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 0k freed
> ACPI: setting ELCR to 0200 (from 0a00)
> checking if image is initramfs... it is
> Freeing initrd memory: 292k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
> Setting up standard PCI resources
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> PCI quirk: region ee00-ee3f claimed by ali7101 ACPI
> PCI quirk: region ef00-ef1f claimed by ali7101 SMB
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: Power Resource [PFAN] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report TC classifier action (bugs to netdev@xxxxxxxxxxxxxxx cc
> hadi@xxxxxxxxxx) PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: f7f00000-fdffffff
> PREFETCH window: 3c000000-3c0fffff
> PCI: Bus 2, cardbus bridge: 0000:00:10.0
> IO window: 00001000-000010ff
> IO window: 00001400-000014ff
> PREFETCH window: 30000000-31ffffff
> MEM window: 32000000-33ffffff
> PCI: Bus 6, cardbus bridge: 0000:00:11.0
> IO window: 00001800-000018ff
> IO window: 00001c00-00001cff
> PREFETCH window: 34000000-35ffffff
> MEM window: 36000000-37ffffff
> PCI: Bus 10, cardbus bridge: 0000:00:11.1
> IO window: 00002000-000020ff
> IO window: 00002400-000024ff
> PREFETCH window: 38000000-39ffffff
> MEM window: 3a000000-3bffffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low)
> -> IRQ 11
> PCI: Enabling device 0000:00:11.0 (0000 -> 0003)
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> -> IRQ 11
> PCI: Enabling device 0000:00:11.1 (0000 -> 0003)
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low)
> -> IRQ 11
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
> TCP: Hash tables configured (established 16384 bind 8192)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1151845047.480:1): initialized
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Activating ISA DMA hang workarounds.
> vesafb: framebuffer at 0xfc000000, mapped to 0xdf880000, using 3072k, total
> 16384k
> vesafb: mode is 1024x768x16, linelength=2048, pages=9
> vesafb: protected mode interface info at c000:775e
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> Real Time Clock Driver v1.12ac
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> NET: Registered protocol family 1
> Using IPI Shortcut mode
> ACPI wakeup devices:
> COM USB1 ASND VIY0 VIY1 LAN MPC0 MPC1 NOV0 LID
> ACPI: (supports S0 S3 S4 S5)
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> Freeing unused kernel memory: 180k freed
> Write protecting the kernel read-only data: 520k
> input: AT Translated Set 2 keyboard as /class/input/input0
> SCSI subsystem initialized
> libata version 1.30 loaded.
> ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
> ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xEFF0 irq 14
> scsi0 : pata_ali
> ata1.00: configured for UDMA/33
> Vendor: ATA Model: IC25N020ATDA04-0 Rev: DA3O
> Type: Direct-Access ANSI SCSI revision: 05
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xEFF8 irq 15
> scsi1 : pata_ali
> input: ImPS/2 Generic Wheel Mouse as /class/input/input1
> ata2.00: configured for PIO4
> Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1313
> Type: CD-ROM ANSI SCSI revision: 05
> SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda: sda1 sda2
> sd 0:0:0:0: Attached scsi disk sda
> ReiserFS: sda2: found reiserfs format "3.6" with standard journal
> ReiserFS: sda2: using ordered data mode
> ReiserFS: sda2: journal params: device sda2, size 8192, journal first block
> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> ReiserFS: sda2: checking transaction log (sda2)
> ReiserFS: sda2: replayed 51 transactions in 8 seconds
> ReiserFS: sda2: Using r5 hash to sort names
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low)
> -> IRQ 11
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected ALi M1644 chipset
> agpgart: AGP aperture is 64M @ 0xf0000000
> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low)
> -> IRQ 11
> Yenta: CardBus bridge found at 0000:00:10.0 [12a3:ab01]
> Yenta: Enabling burst memory read transactions
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:10.0, mfunc 0x01000002, devctl 0x60
> Yenta: ISA IRQ mask 0x0000, PCI irq 11
> Socket status: 30000011
> ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> -> IRQ 11
> Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001]
> Yenta: ISA IRQ mask 0x04b8, PCI irq 11
> Socket status: 30000007
> pccard: PCMCIA card inserted into slot 0
> cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff
> 0xe0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: clean.
> cs: memory probe 0xa0000000-0xa0ffffff: clean.
> pcmcia: registering new device pcmcia0.0
> wlags49_h1_cs v7.18 for PCMCIA, 03/31/2004 14:31:00 by Agere Systems,
> http://www.agere.com
> *** Modified for kernel 2.6 by Andrey Borzenkov <arvidjaar@xxxxxxx>
> $Revision: 25 $
> *** Station Mode (STA) Support: YES
> *** Access Point Mode (AP) Support: YES
> eth0: PRI 31 variant 2 version 9.48
> eth0: NIC 5 variant 2 version 1.02
> eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C
> ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low)
> -> IRQ 11
> Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001]
> Yenta: ISA IRQ mask 0x04b8, PCI irq 11
> Socket status: 30000007
> ACPI: AC Adapter [ADP1] (on-line)
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: Battery Slot [BAT2] (battery absent)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Fan [FAN] (off)
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Thermal Zone [THRM] (38 C)
> toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
> toshiba_acpi: HCI method: \_SB_.VALD.GHCI
> ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
> ReiserFS: sda2: Removing [35299 359282 0x0 SD]..done
> ReiserFS: sda2: Removing [160679 286174 0x0 SD]..done
> ReiserFS: sda2: Removing [79727 236457 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236448 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236444 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236442 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236438 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236410 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236387 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236369 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236368 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236365 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236363 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236338 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236337 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236336 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236333 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236305 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236299 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 236298 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 235022 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 235014 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234983 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234970 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234954 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234925 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234421 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234416 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 234396 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 233009 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 233007 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 233004 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 232966 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 123769 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 100962 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 87692 0x0 SD]..done
> ReiserFS: sda2: Removing [178237 79655 0x0 SD]..done
> ReiserFS: sda2: Removing [45614 74578 0x0 SD]..done
> ReiserFS: sda2: There were 38 uncompleted unlinks/truncates. Completed
> Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k
> loop: loaded (max 8 devices)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)

iD8DBQFEqrlMR6LMutpd94wRAnKYAJ412evYClTl31Qj2Yp6SDPK7Ae2mACfdInU
ajfkKAy2mkMkzPW0wQxFJOQ=
=sULC
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/