Re: 2.6.17-mm5 + pcmcia/hostap/8139too patches -- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage

[Miles Lane]

On 7/4/06, Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> wrote:
> Ar Llu, 2006-07-03 am 16:14 -0700, ysgrifennodd Miles Lane:
> > eth2: NE2000 (DL10022 rev 30): io 0x300, irq 11, hw_addr 00:50:BA:73:92:3D
> > Which seems to indicate I need to tweak the PCMCIA settings to get this card
> > working.  I wonder if anyone is going to follow up on enabling shared IRQ
> > support.
>
>
> Try this. Note the SMP locking in this driver appears iffy and looks
> like it was never SMP sane.

The patch corrects the messages about shared interrupts:

pccard: PCMCIA card inserted into slot 0
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
cs: memory probe 0x50000000-0x51ffffff: excluding 0x50000000-0x51ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
pcmcia: registering new device pcmcia0.0
PM: Adding info for pcmcia:0.0
eth2: NE2000 (DL10022 rev 30): io 0x300, irq 11, hw_addr 00:50:BA:73:92:3D

I have lost the connector cable that attaches the card to an ethernet
cable, so I have been using a cable labelled 3COM instead.  It has
LEDs for 10 and 100 Kbps connections.
Neither LED is lighting up.  On the other hand, NetworkManager
seems aware when I have an ethernet cable attached.  I now
suspect that I need a new cable.  The card is a D-Link DFE-650
Fast Ethernet PCMCIA adapter.  Maybe I should order one of these:
http://shopping.yahoo.com/p:QVS%20CPN-GN100T%20:1991447348;_ylt=Ap_SzM9pNc5eVJDZKVqsYd5tpcsE;_ylu=X3oDMTBuZDl1N2RxBF9zAzU5MDk4NTIxBGx0AzQEc2VjA3Ny?clink=dmss//ctx=sc:cnetwork_adapter,c:cnetwork_adapter,mid:57,pid:1991447348,pdid:57,pos:6

What do you think?
          Miles
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/