Re: Fwd: Re: sata_mv driver on 88sx6041 ( 2.6.14): PCI IRQ error

[Jeff Garzik]

Narendra Hadke wrote:
> Hi,
>     The sata_mv I am using is with
>   "three fixes" ie 0.6 on kernel version 2.6.14
> (Marvell 6041 part) without the IEN related change. 
> libata & scsi are modified(imported change from later
> version of kernel) to make this change 
> compile.(With IEN change  driver gets truck after 
> identifying the disk)
>    I  got rid of the disk errors but the next the
>  error I am getting is related to PCI IRQ.
> -----------------------------------------
> SCSI device sda: drive cache: write back
>  sda:<3>sata_mv: PCI ERROR; PCI IRQ cause=0x00000400

"PCI ERROR" is the hardware signalling that a major PCI-bus-related 
error has occurred.

Try moving the controller to a new PCI slot, or other hardware-level fixes.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/