Re: [patch] spinlocks: remove 'volatile'

[Chase Venters]

On Thursday 06 July 2006 08:39, J.A. Magallón wrote:
>
> // Read 10 samples from 2 A/D converters.
>
> int*	ina;
> int	a[10];
> int*	inb;
> int	b[10];
>
> for (int i=0; i<10; i++)
> {
> 	a[i] = *ina;
> 	barrier();
> 	b[i] = *inb;
> }
>
> The barrier prevents the compiler of translating this to:
>
> for (int i=0; i<10; i++)
> {
> 	b[i] = *inb;
> 	a[i] = *ina;
> }
>
> or even to:
>
> for (int i=0; i<10; i++)
> 	a[i] = *ina;
> for (int i=0; i<10; i++)
> 	b[i] = *inb;
>
> but does not prevent it to do this:
>
> register int tmp_a = *ina;
> register int tmp_b = *inb;
>
> for (int i=0; i<10; i++)
> {
> 	a[i] = tmp_a;
> 	b[i] = tmp_b;
> }
>
> because nor 'ina' nor 'inb' change under what the compiler sees inside
> the loop. 'volatile' prevents the compiler of do a high level cache of
> *ina or *inb.
>

Check the GCC documentation:

http://gcc.gnu.org/onlinedocs/gcc-4.1.1/gcc/Extended-Asm.html
 
> If your assembler instructions access memory in an unpredictable fashion,
> add `memory' to the list of clobbered registers. This will cause GCC to not
> keep memory values cached in registers across the assembler instruction and
> not optimize stores or loads to that memory. You will also want to add the
> volatile keyword if the memory affected is not listed in the inputs or
> outputs of the asm, as the `memory' clobber does not count as a side-effect
> of the asm. If you know how large the accessed memory is, you can add it as
> input or output but if this is not known, you should add `memory'. As an
> example, if you access ten bytes of a string, you can use a memory input
> like:         

The reference to the volatile keyword here is of course talking about asm 
volatile usage to keep the compiler from optimizing out the seemingly 
pointless assembly (not usage on a variable).

Thanks,
Chase
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/