Re: annoying frequent overcurrent messages.

[Alan Stern]

Dave Jones wrote:

> I have a box that's having its dmesg flooded with..
> 
> hub 1-0:1.0: over-current change on port 1
> hub 1-0:1.0: over-current change on port 2
> hub 1-0:1.0: over-current change on port 1
> hub 1-0:1.0: over-current change on port 2
...

> over and over again..
> The thing is, this box doesn't even have any USB devices connected to it,
> so there's absolutely nothing I can do to remedy this.

Well, overcurrent is a potentially dangerous situation.  That's why it 
gets reported with dev_err priority.

Evidently it's a hardware fault.  Perhaps the overcurrent-detect input 
lines are floating and constantly triggering as a result.  It's not even 
clear that attaching a USB device would make the problem go away.

Since you're not using the UHCI controller on that computer, you could 
simply rmmod uhci-hcd (or modify /etc/modprobe.conf to prevent it from 
being loaded in the first place).  That would stop the constant interrupts 
and the syslog spamming.

But as for fixing the underlying hardware problem, I don't think there's 
anything we can do.

Alan Stern

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/