Re: annoying frequent overcurrent messages.

[Ray Lee]

On 7/12/06, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> Dave Jones wrote:
> > I have a box that's having its dmesg flooded with..
> >
> > hub 1-0:1.0: over-current change on port 1
> > hub 1-0:1.0: over-current change on port 2
> > hub 1-0:1.0: over-current change on port 1
> > hub 1-0:1.0: over-current change on port 2
> ...
>
> > over and over again..
> > The thing is, this box doesn't even have any USB devices connected to it,
> > so there's absolutely nothing I can do to remedy this.
>
> Since you're not using the UHCI controller on that computer, you could
> simply rmmod uhci-hcd (or modify /etc/modprobe.conf to prevent it from
> being loaded in the first place).  That would stop the constant interrupts
> and the syslog spamming.

For the syslog spamming, you could jus emit the message once when the
state is first noticed, then emit a everything good message when it
clears up. There's no need to log it repeatedly during the problem
period.

Ray
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/