Re: LibPATA code issues / 2.6.17.3 (What is the next step?)

[Justin Piszcz]

Unfortunately not, the correct patch you need is attached to get the 
ata_op code, against 2.6.17.3.

On Wed, 12 Jul 2006, David Greaves wrote:

> Alan Cox wrote:
> > Ar Maw, 2006-07-11 am 09:28 -0400, ysgrifennodd Justin Piszcz:
> > > Alan/Jeff/Mark,
> > >
> > > Is there anything else I can do to further troubleshoot this problem now
> > > that we have the failed opcode(s)?  Again, there is never any corruption
> > > on these drives, so it is more of an annoyance than anything else.
> >
> > Nothing strikes me so far other than the data not making sense. Possibly
> > it will become clearer later if/when we see other examples.
>
> For me it's SMART related.
>
> smartctl -data -o on /dev/sda reliably gets a similar message.
> Justin - does this smartctl command trigger a message for you?
>
> I've been mailing on and off since January-ish.
> (http://marc.theaimsgroup.com/?l=linux-ide&w=2&r=7&s=libpata&q=b)
>
> Back in March I was running 2.6.16 (with a different version of Mark's
> opcode patch) and I sent an email with the following info:
>
> dmesg:
> ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/04 to SCSI
> SK/ASC/ASCQ 0xb/00/00
> ata1: status=0x51 { DriveReady SeekComplete Error }
> ata1: error=0x04 { DriveStatusError }
>
> Does that help with the diagnosis?
>
> Also see my emails: SMART on SATA reporting errors?
>  http://marc.theaimsgroup.com/?l=linux-ide&m=113933732903205&w=2
>
> I did reply but got no response so I assumed I was just so far off base
> that I was being ignored  :)
>
> David
diff -uprN linux-2.6.17.3/drivers/scsi/libata-scsi.c linux-2.6.17.3-diff/drivers/scsi/libata-scsi.c
--- linux-2.6.17.3/drivers/scsi/libata-scsi.c	2006-06-30 13:37:38.000000000 -0400
+++ linux-2.6.17.3-diff/drivers/scsi/libata-scsi.c	2006-07-09 16:31:45.665112000 -0400
@@ -428,10 +428,16 @@ int ata_scsi_device_suspend(struct scsi_
  *	spin_lock_irqsave(host_set lock)
  */
 void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
-			u8 *ascq)
+			u8 *ascq, struct ata_queued_cmd *qc)
 {
 	int i;
 
+	struct scsi_cmnd *cmd = qc->scsicmd;
+	struct ata_taskfile *tf = &qc->tf;
+	unsigned char *sb = cmd->sense_buffer;
+	unsigned char *desc = sb + 8;
+	unsigned char ata_op = tf->command;
+	
 	/* Based on the 3ware driver translation table */
 	static const unsigned char sense_table[][4] = {
 		/* BBD|ECC|ID|MAR */
@@ -520,6 +526,7 @@ void ata_to_sense_error(unsigned id, u8 
 	printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
 	       "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
 	       *sk, *asc, *ascq);
+	printk(KERN_ERR "ata_gen_ata_desc_sense: failed ata_op=0x%02x\n", ata_op);
 	return;
 }
 
@@ -542,6 +549,7 @@ void ata_gen_ata_desc_sense(struct ata_q
 	struct ata_taskfile *tf = &qc->tf;
 	unsigned char *sb = cmd->sense_buffer;
 	unsigned char *desc = sb + 8;
+	unsigned char ata_op = tf->command;
 
 	memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
 
@@ -558,8 +566,9 @@ void ata_gen_ata_desc_sense(struct ata_q
 	 * onto sense key, asc & ascq.
 	 */
 	if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+		printk(KERN_WARNING "ata_gen_ata_desc_sense: failed ata_op=0x%02x\n", ata_op);
 		ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
-				   &sb[1], &sb[2], &sb[3]);
+				   &sb[1], &sb[2], &sb[3],qc);
 		sb[1] &= 0x0f;
 	}
 
@@ -617,6 +626,7 @@ void ata_gen_fixed_sense(struct ata_queu
 	struct scsi_cmnd *cmd = qc->scsicmd;
 	struct ata_taskfile *tf = &qc->tf;
 	unsigned char *sb = cmd->sense_buffer;
+	unsigned char ata_op = tf->command;
 
 	memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
 
@@ -633,8 +643,9 @@ void ata_gen_fixed_sense(struct ata_queu
 	 * onto sense key, asc & ascq.
 	 */
 	if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+		printk(KERN_WARNING "ata_gen_fixed_sense: failed ata_op=0x%02x\n", ata_op);
 		ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
-				   &sb[2], &sb[12], &sb[13]);
+				   &sb[2], &sb[12], &sb[13],qc);
 		sb[2] &= 0x0f;
 	}