Re: pcmcia card not recognized with 2.6.18-rc1

[Luca Ognibene]

Luca Ognibene wrote:
> I've a "Onda N501HS" umts/gprs pcmcia card. I've attached it to the pci
> bus using a pci<->pcmcia card.
> I've tested with two kernels, 2.6.8 (from debian sarge) and 2.6.18-rc1
> (compiled). Both kernels can't recognize the card at the boot time, only
> the debian kernel can recognize it if i remove/reinsert it while the
> system is running.
> 
> Logs from 2.6.18-rc1: http://people.freedesktop.org/~skaboy/USB-2.6.18-rc1
> 
> Logs from 2.6.8 (debian sarge):
> http://people.freedesktop.org/~skaboy/USB-2.6.8-debian
> 
> Motherboard: SiS-661
> Distro: debian sarge
> 
more tests with different kernels:
 * 2.6.8         (no cold, yes hot)
 * 2.6.12        (no cold, yes hot)
 * 2.6.13.5      (no cold, yes hot)
 * 2.6.14.4      (no cold, yes hot)
 * 2.6.14.7      (no cold, yes hot)
 * 2.6.15        (no cold, no hot)
 * 2.6.16        (no cold, no hot)
 * 2.6.18-rc1    (no cold, no hot)

where "no cold" means the card is not recognized at boot
and "yes hot" means the card is recognized if i remove/insert it
when the system is running.
I'll try to debug it more but i don't really know what to do.. anyone
can point me to the right direction?

Thanks
Luca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/