Re: [patch 3/3] Add tsi108 On Chip Ethernet device driver support

[Jeff Garzik]

Zang Roy-r61911 wrote:
> +#define TSI108_ETH_WRITE_REG(offset, val) \
> +	writel(le32_to_cpu(val),data->regs + (offset))
> +
> +#define TSI108_ETH_READ_REG(offset) \
> +	le32_to_cpu(readl(data->regs + (offset)))
> +
> +#define TSI108_ETH_WRITE_PHYREG(offset, val) \
> +	writel(le32_to_cpu(val), data->phyregs + (offset))
> +
> +#define TSI108_ETH_READ_PHYREG(offset) \
> +	le32_to_cpu(readl(data->phyregs + (offset)))


NAK:

1) writel() and readl() are defined to be little endian.

If your platform is different, then your platform should have its own 
foobus_writel() and foobus_readl().

2) TSI108_ETH_WRITE_REG() is just way too long.  TSI_READ(), 
TSI_WRITE(), TSI_READ_PHY() and TSI_WRITE_PHY() would be far more readable.

More in next email.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/