Re: [RFC 0/6] TCP socket splice

[Phillip Susi]

How is this different than just having the application mmap() the file 
and recv() into that buffer?

Ashwini Kulkarni wrote:
> My name is Ashwini Kulkarni and I have been working at Intel Corporation for
> the past 4 months as an engineering intern. I have been working on the 'TCP
> socket splice' project with Chris Leech. This is a work-in-progress version
> of the project with scope for further modifications.
>
> TCP socket splicing:
> It allows a TCP socket to be spliced to a file via a pipe buffer. First, to
> splice data from a socket to a pipe buffer, upto 16 source pages(s) are pulled
> into the pipe buffer. Then to splice data from the pipe buffer to a file,
> those pages are migrated into the address space of the target file. It takes
> place entirely within the kernel and thus results in zero memory copies. It is
> the receive side complement to sendfile() but unlike sendfile() it is
> possible to splice from a socket as well and not just to a socket.
>
> Current Method:
>                          + >  Application Buffer +
>                          |                       |
>         _________________|_______________________|_____________
>                          |                       |
>               Receive or |                       | Write
>               I/OAT DMA  |                       |
>                          |                       |
>                          |                       V
>                        Network              File System
>                        Buffer                  Buffer
>                          ^                       |
>                          |                       |
>         _________________|_______________________|_____________
>                      DMA |                       | DMA
>                          |                       |
>        Hardware          |                       |
>                          |                       V
>                         NIC                     SATA
>                                                                     
> In the current method, the packet is DMA’d from the NIC into the network buffer.
> There is a read on socket to the user space and the packet data is copied from
> the network buffer to the application buffer. A write operation then moves the
> data from the application buffer to the file system buffer which is then DMA'd
> to the disk again. Thus, in the current method there will be one full copy of
> all the data to the user space.
>
> Using TCP socket splice:
>
>                     Application Control
>                          |
>         _________________|__________________________________
>                          |
>                          |   TCP socket splice
>                          | +---------------------+
>                          | |     Direct path     |
>                          V |                     V
>                        Network              File System
>                        Buffer                  Buffer
>                          ^                       |
>                          |                       |
>         _________________|_______________________|__________
>                      DMA |                       | DMA
>                          |                       |
>        Hardware          |                       |
>                          |                       V
>                         NIC                     SATA
>                                                                     
> In this method, the objective is to use TCP socket splicing to create a direct
> path in the kernel from the network buffer to the file system buffer via a pipe
> buffer. The pages will migrate from the network buffer (which is associated
> with the socket) into the pipe buffer for an optimized path. From the pipe
> buffer, the pages will then be migrated to the output file address space page
> cache. This will enable to create a LAN to file-system API which will avoid the
> memcpy operations in user space and thus create a fast path from the network
> buffer to the storage buffer.
>
> Open Issues (currently being addressed):
> There is a performance drop when transferring bigger files (usually larger than
> 65536 bytes in size). Performance drop increases with the size of the file.
> Work is in progress to identify the source of this issue.
>
> We encourage the community to review our TCP socket splice project. Feedback
> would be greatly appreciated.
>
> --
> Ashwini Kulkarni

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/