Re: /drivers/usb/class/cdc-acm.c patch question, please cc

[Ryan Moszynski]

sorry guys, my bad.

I just compiled 2.6.18 again with my stock config, and everything
worked. With 2.6.15 i had to recompile using the patch and load these
in /etc/modules in order for my card to work at full speed.

######
ohci-hcd
usbserial vendor=0x0c88 product=0x17da maxSize=2048
cdc_acm maxszr=16384 maxszw=2048
#######

however, now, at boot the kernel loads the 'airprime' driver, and
everything works without any manual module loading.  Yay.  2.6.15 had
the airprime driver, but i guess it didn't recognize my card at that
point.

However, to get this(and i would guess any other evdo) card to work,
you still have set up 4 config files:

######
etc/ppp/chap-secrets
etc/ppp/peers/verizon
etc/chatscripts/verizon-connect
etc/chatscripts/verizon-disconnect
#######

which makes it a lot more labor intensive to set up for the first time
than it is in windows, but at least everything works.



On 9/24/06, Oliver Neukum <oliver@xxxxxxxxxx> wrote:
> Am Freitag, 22. September 2006 23:45 schrieb Ryan Moszynski:
> > since 2.6.14 i have been applying the following patch and recompiling
> > my kernel so
> > that i can use my verizon kpc650 evdo card with my laptop. I've
> > applied this patch
> > succesfully on 2.6.14 and 2.6.15. It works great and I have no problems. I am
> > trying to apply the patch to 2.6.18 but it fails, and i don't want to
> > break anything,
>
> First give me a description of your device. Secondly, we'll try
> to find a generic solution. Thirdly, if nothing else helps, we'll add
> a generic quirk to the driver.
>
>         Regards
>                 Oliver
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/