Re: [patch 2/2] libata: _SDD support

[Jeff Garzik]

Kristen Carlson Accardi wrote:
> +	/* Don't continue if not a SATA device. */
> +	if (!ata_id_is_sata(atadev->id)) {
> +		if (ata_msg_probe(ap))
> +			ata_dev_printk(atadev, KERN_DEBUG,
> +				"%s: ata_id_is_sata is False\n", __FUNCTION__);
> +		goto out;
> +	}

I forgot to note this in patch #1, so this comment applies to both patch 
#1 and patch #2:

ata_id_is_sata() is probably not the check you want.  This tests Word 93 
of IDENTIFY DEVICE output, which is a check that's not in the ATA 
specification, but rather something I came up with.  It will indicate 
false for ATA devices that attach via SATA cables, but have a PATA 
bridge chip soldered onto the ATA device.

A better test is probably "ap->cbl == ATA_CBL_SATA".


> +EXPORT_SYMBOL_GPL(ata_acpi_push_id);

Remove the export, this is for exporting symbols to export kernel 
modules, not for making symbols visible at the C level, to other C modules.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/