Roger Heflin wrote:The failure can manifest itself in many ways, I haveThe strange thing is that it always occures on the copied data,.. not
only seen it as a read failure, but there should be no
reason why it cannot also show as a write failure.
It should be in the later vanilla kernels, it won't
be in the earlier ones, I would do a
find /lib/modules -name "*edac*" -ls
It is a hw issue, either something is running faster that
it should be (pci bus set to fast for the given hardware/config)
or something is broken.
the original (which is on another disk). But wouldn those parity errors
not occur in general?
For example al my sha1sums -c sumfile checks are working corretly on the
original disk :/