[PATCH] hpt36x: Suspend/resume support

[Alan]

Another chipset which needs some reconfiguration after a resume. All the
chip setup is moved to a new function called in both setup and resume. 

Signed-off-by: Alan Cox <alan@xxxxxxxxxx>

diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.19-rc6-mm1/drivers/ata/pata_hpt366.c linux-2.6.19-rc6-mm1/drivers/ata/pata_hpt366.c
--- linux.vanilla-2.6.19-rc6-mm1/drivers/ata/pata_hpt366.c	2006-11-24 13:58:28.000000000 +0000
+++ linux-2.6.19-rc6-mm1/drivers/ata/pata_hpt366.c	2006-11-24 14:35:06.000000000 +0000
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.5.1"
+#define DRV_VERSION	"0.5.3"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -338,6 +338,8 @@
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 /*
@@ -380,6 +382,27 @@
 };
 
 /**
+ *	hpt36x_init_chipset	-	common chip setup
+ *	@dev: PCI device
+ *
+ *	Perform the chip setup work that must be done at both init and
+ *	resume time
+ */
+
+static void hpt36x_init_chipset(struct pci_dev *dev)
+{
+	u8 drive_fast;
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+	pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+	pci_read_config_byte(dev, 0x51, &drive_fast);
+	if (drive_fast & 0x80)
+		pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+}
+
+/**
  *	hpt36x_init_one		-	Initialise an HPT366/368
  *	@dev: PCI device
  *	@id: Entry in match table
@@ -414,7 +437,6 @@
 
 	u32 class_rev;
 	u32 reg1;
-	u8 drive_fast;
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
@@ -424,14 +446,7 @@
 	if (class_rev > 2)
 			return -ENODEV;
 
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
-	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
-	pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
-
-	pci_read_config_byte(dev, 0x51, &drive_fast);
-	if (drive_fast & 0x80)
-		pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+	hpt36x_init_chipset(dev);
 
 	pci_read_config_dword(dev, 0x40,  &reg1);
 
@@ -452,9 +467,15 @@
 	return ata_pci_init_one(dev, port_info, 2);
 }
 
+static int hpt36x_reinit_one(struct pci_dev *dev)
+{
+	hpt36x_init_chipset(dev);
+	return ata_pci_device_resume(dev);
+}
+
+
 static const struct pci_device_id hpt36x[] = {
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
-
 	{ },
 };
 
@@ -462,7 +483,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= hpt36x,
 	.probe 		= hpt36x_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= hpt36x_reinit_one,
 };
 
 static int __init hpt36x_init(void)
@@ -470,13 +493,11 @@
 	return pci_register_driver(&hpt36x_pci_driver);
 }
 
-
 static void __exit hpt36x_exit(void)
 {
 	pci_unregister_driver(&hpt36x_pci_driver);
 }
 
-
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
 MODULE_LICENSE("GPL");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/