[panic] aacraid on 2.4.33.4 w/ PERC 3/Di

From: Mark Drago
Date: Thu Dec 14 2006 - 15:49:08 EST

Hello,

I have been seeing some kernel panics on a Dell PowerEdge 2650 with a
PERC 3/Di raid controller doing RAID 1. I have now seen the panics
occur on multiple PE2650s. The panic seems to occur during periods of
high disk activity. I am able to reliably reproduce the crashes by
running Bonnie in a loop.

I originally saw the panics with a 2.4.32 kernel which had a few patches
in it, none directly related to scsi or aacraid. The patches were a few
from netfilter's patch-o-matic-ng, jgarzik's libata for 2.4.32, ebtables
and an updated Tigon3 driver from Broadcom. In order to verify that
none of these patches were causing any problems I checked that the panic
still happened with a stock 2.4.33.4 kernel.

I have included below the oops output converted by ksymoops for the
panic that occurred on the stock 2.4.33.4 kernel. I have seen the
problem when running both an SMP and non-SMP kernel. Also included
below are relevant sections from my .config, lspci and /proc/scsi/scsi.
I have also included 3 other oopses that were seen with the patched
2.4.32 kernel at the very bottom of this email. If there is any other
information I can provide to aid debugging please let me know.

All of the kernels were compiled with gcc-3.3.6. I have not yet seen
the panic occur on 2.6 kernels. I am however currently running the
Bonnie test on 2.6.18.2.

Any information regarding this panic, how best to avoid it, or what to
do to further debug the problem is greatly appreciated.

Thank you,
Mark Drago

Script used to cause panic (just run and wait for a bit):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#!/bin/bash
filesize=2000
while /bin/true; do
Bonnie -d /tmp -s $filesize &> /dev/null
done

Oops output from panic on stock 2.4.33.4:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ksymoops 2.4.9 on i686 2.4.32-20060810. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.33-20061213-smp (specified)
-m /boot/System.map-2.4.33.4-20061213-smp (specified)

kernel BUG a sched.c:564!
CPU: 0
EIP: 0010:[<c01155c2>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000018 ebx: f7b901ec ecx: c042e000 edx: 00000001
esi: c042e000 edi: 00000000 ebp: c042fd50 esp: c042fd2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c044f000)
Stack: c03590be c042e000 00000002 c042e000 c042fd58 c024d909 f7b901ec
c042e000
f7b901f4 c042fd58 c01074bb 00000001 c042e000 f7b901f8 f7b901f8
f7bf40c0
00000001 f7b901e0 f7bf447c c0107648 f7b901ec fffffff5 00000000
c024e37a
Call Trace: [<c024d909>] [<c01074bb>] [<c0107648>] [<c024e37a>]
[<c024ab4c>]
[<c024b68e>] [<c024a6a8>] [<c0240973>] [<c0240f6c>] [<c0247017>]
[<c02466cd>]
[<c0246914>] [<c0246ba8>] [<c02b92f4>] [<c0241209>] [<c02410b6>]
[<c011d05e>]
[<c011cf40>] [<c011cd17>] [<c010a172>] [<c0106ca8>] [<c010c70c>]
[<c0106ca8>]
[<c0160cd4>] [<c0106d42>] [<c0105000>]
Code: 0f 0b 34 02 b6 90 35 c0 58 e9 45 fb ff ff 0f 0b 2d 02 b6 90


>>EIP; c01155c2 <schedule+4f2/514> <=====

>>ecx; c042e000 <init_task_union+0/2000>
>>esi; c042e000 <init_task_union+0/2000>
>>ebp; c042fd50 <init_task_union+1d50/2000>
>>esp; c042fd2c <init_task_union+1d2c/2000>

Trace; c024d909 <aac_queue_get+95/c8>
Trace; c01074bb <__down+6b/bc>
Trace; c0107648 <__down_failed+8/c>
Trace; c024e37a <.text.lock.commsup+38/6e>
Trace; c024ab4c <aac_get_container_name+6c/f4>
Trace; c024b68e <aac_scsi_cmd+fe/36c>
Trace; c024a6a8 <aac_queuecommand+14/18>
Trace; c0240973 <scsi_dispatch_cmd+e7/260>
Trace; c0240f6c <scsi_done+0/9c>
Trace; c0247017 <scsi_request_fn+1bf/368>
Trace; c02466cd <scsi_queue_next_request+45/10c>
Trace; c0246914 <__scsi_end_request+180/1f8>
Trace; c0246ba8 <scsi_io_completion+144/3ac>
Trace; c02b92f4 <rw_intr+48/198>
Trace; c0241209 <scsi_finish_command+a5/ac>
Trace; c02410b6 <scsi_bottom_half_handler+ae/d8>
Trace; c011d05e <bh_action+46/70>
Trace; c011cf40 <tasklet_hi_action+60/98>
Trace; c011cd17 <do_softirq+c3/c8>
Trace; c010a172 <do_IRQ+ca/cc>
Trace; c0106ca8 <default_idle+0/38>
Trace; c010c70c <call_do_IRQ+5/d>
Trace; c0106ca8 <default_idle+0/38>
Trace; c0160cd4 <ext3_free_branches+9c/1dc>
Trace; c0106d42 <cpu_idle+42/5c>
Trace; c0105000 <_stext+0/0>

Code; c01155c2 <schedule+4f2/514>
00000000 <_EIP>:
Code; c01155c2 <schedule+4f2/514> <=====
0: 0f 0b ud2a <=====
Code; c01155c4 <schedule+4f4/514>
2: 34 02 xor $0x2,%al
Code; c01155c6 <schedule+4f6/514>
4: b6 90 mov $0x90,%dh
Code; c01155c8 <schedule+4f8/514>
6: 35 c0 58 e9 45 xor $0x45e958c0,%eax
Code; c01155cd <schedule+4fd/514>
b: fb sti
Code; c01155ce <schedule+4fe/514>
c: ff (bad)
Code; c01155cf <schedule+4ff/514>
d: ff 0f decl (%edi)
Code; c01155d1 <schedule+501/514>
f: 0b 2d 02 b6 90 00 or 0x90b602,%ebp

<0>Kernel panic: Aiee, killing interrupt handler!

Contents of /proc/scsi/scsi:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: BASCOM_MIRROR Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02

Relevant Sections from .config:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_STATS is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_PDC202XX=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_MEGARAID2=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_SIS=y
CONFIG_SCSI_SATA_ULI=y
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_VITESSE=y
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_CPQFCTS=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_BOOT=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_ISENSE=m
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

Relevant Sections from 'lspci -vvv':
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
00:04.0 Class ff00: Dell Computer Corporation: Unknown device 000c
Subsystem: Dell Computer Corporation: Unknown device 000c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ecf8 [size=8]
Region 2: I/O ports at ece8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID
Controller 3/Di
Subsystem: Dell Computer Corporation PowerEdge Expandable RAID
Controller 3/Di
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe102000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at ec80 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.2 Class ff00: Dell Computer Corporation: Unknown device 000d
Subsystem: Dell Computer Corporation: Unknown device 000d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 27
Region 0: I/O ports at ecf4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:08.0 PCI bridge: Intel Corporation: Unknown device 0309 (rev 01)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:08.1 RAID bus controller: Dell Computer Corporation: Unknown device
000a (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fcb00000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Other oopses seen while running 2.4.32 w/ some patches:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ksymoops 2.4.9 on i686 2.4.32-20060810. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.32-20060810/ (default)
-m /boot/System.map-2.4.32-20060810 (specified)

kernel BUG at sched.c:564!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01155aa>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000018 ebx: f7b9000c ecx: c0438000 edx: 00000001
esi: c0438000 edi: 00000000 ebp: c0439d50 esp: c0439d2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0439000)
Stack: c036009e c0438000 00000002 c0438000 c0439d58 c024d6b9 f7b9000c
c0438000
f7b90014 c0439d58 c01074bb 00000001 c0438000 f7b90018 f7b90018
f7bf70c0
00000001 f7b90000 f7bf747c c0107648 f7b9000c fffffff5 00000000
c024e12a
Call Trace: [<c024d6b9>] [<c01074bb>] [<c0107648>] [<c024e12a>]
[<c024a8fc>]
[<c024b43e>] [<c024a458>] [<c0240723>] [<c0240d1c>] [<c0246dc7>]
[<c024647d>]
[<c02466c4>] [<c0246958>] [<c02b9140>] [<c0240fb9>] [<c0240e66>]
[<c011d046>]
[<c011cf28>] [<c011ccff>] [<c010a172>] [<c0106ca8>] [<c010c70c>]
[<c0106ca8>]
[<c0106cd4>] [<c0106d42>] [<c0105000>]
Code: 0f 0b 34 02 96 00 36 c0 58 e9 45 fb ff ff 0f 0b 2d 02 96 00
Error (pclose_local): Oops_decode_part pclose failed 0x7f00
Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.gktANP


>>EIP; c01155aa <qm_refs+1aa/1c8> <=====

>>ebx; f7b9000c <_end+376fa294/384302e8>
>>ecx; c0438000 <tigonFwText+118c0/18020>
>>esi; c0438000 <tigonFwText+118c0/18020>
>>ebp; c0439d50 <tigonFwText+13610/18020>
>>esp; c0439d2c <tigonFwText+135ec/18020>

Trace; c024d6b9 <check_extport+2a1/424>
Trace; c01074bb <__down_failed_trylock+7/c>
Trace; c0107648 <sys_rt_sigsuspend+28/100>
Trace; c024e12a <configure_termination+5de/614>
Trace; c024a8fc <ahc_dump_card_state+10b4/112c>
Trace; c024b43e <ahc_write_seeprom+2fe/5dc>
Trace; c024a458 <ahc_dump_card_state+c10/112c>
Trace; c0240723 <ahc_handle_scsiint+35b/d18>
Trace; c0240d1c <ahc_handle_scsiint+954/d18>
Trace; c0246dc7 <ahc_init+613/62c>
Trace; c024647d <ahc_chip_init+751/a88>
Trace; c02466c4 <ahc_chip_init+998/a88>
Trace; c0246958 <ahc_init+1a4/62c>
Trace; c02b9140 <pci_scan_bridge+4c/180>
Trace; c0240fb9 <ahc_handle_scsiint+bf1/d18>
Trace; c0240e66 <ahc_handle_scsiint+a9e/d18>
Trace; c011d046 <sys_getpriority+46/60>
Trace; c011cf28 <proc_sel+78/84>
Trace; c011ccff <sys_ssetmask+47/48>
Trace; c010a172 <sys_vm86old+fa/108>
Trace; c0106ca8 <cpu_idle+2c/5c>
Trace; c010c70c <show_cpuinfo+1cc/240>
Trace; c0106ca8 <cpu_idle+2c/5c>
Trace; c0106cd4 <cpu_idle+58/5c>
Trace; c0106d42 <machine_real_restart+6a/a0>
Trace; c0105000 <_stext+0/0>

<0>Kernel panic: Aiee, killing interrupt handler!

----------------------------------------------------------------

ksymoops 2.4.9 on i686 2.4.32-20060810-smp. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.32-20060810-smp/ (default)
-m /boot/System.map-2.4.32-20060810-smp (specified)

kernel BUG at sched.c:564!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01118af>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: 00000018 ebx: f7bc01bc ecx: f535c000 edx: f6e693f0
esi: f535c000 edi: f7bc01c4 ebp: f535da44 esp: f535da24
ds: 0018 es: 0018 ss: 0018
Process Bonnie (pid: 2853, stackpage=f535d000)
Stack: c0337c3e 00000002 f535c000 00000000 c0236795 f7bc01bc f535c000
f7bc01c4
f535da4c c010736a 00000001 f535c000 f7bc01c4 f7bc01c4 f7b00c00
00000001
f7bc01b0 00000002 c01074a4 f7bc01bc fffffff5 00000000 c0237195
00000002
Call Trace: [<c0236795>] [<c010736a>] [<c01074a4>] [<c0237195>]
[<c0233b28>]
[<c0234652>] [<c0233694>] [<c022a10e>] [<c022a69c>] [<c023015b>]
[<c022f860>]
[<c022fa71>] [<c022fd04>] [<c02a002c>] [<c022a8f4>] [<c022a7b6>]
[<c0117e5e>]
[<c0117d9b>] [<c0117c13>] [<c010990d>] [<c010bb44>] [<c015a09f>]
[<c014f9a2>]
[<c01540ca>] [<c01540f0>] [<c0159b2b>] [<c01545bc>] [<c0151945>]
[<c0151c64>]
[<c0131fc3>] [<c01321c8>] [<c0151ab8>] [<c0152194>] [<c0132385>]
[<c01522f8>]
[<c01328e4>] [<c015eea7>] [<c01330a6>] [<c01522c8>] [<c0152752>]
[<c01522c8>]
[<c01259be>] [<c0125e97>] [<c01504a7>] [<c0130886>] [<c010857f>]
Code: 0f 0b 34 02 36 7c 33 c0 58 e9 3c fd ff ff 0f 0b 2d 02 36 7c
Error (pclose_local): Oops_decode_part pclose failed 0x7f00
Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.EOhEew


>>EIP; c01118af <pirq_get_info+1b/64> <=====

>>ebx; f7bc01bc <_end+376c0144/383e7fe8>
>>ecx; f535c000 <_end+34e5bf88/383e7fe8>
>>edx; f6e693f0 <_end+36969378/383e7fe8>
>>esi; f535c000 <_end+34e5bf88/383e7fe8>
>>edi; f7bc01c4 <_end+376c014c/383e7fe8>
>>ebp; f535da44 <_end+34e5d9cc/383e7fe8>
>>esp; f535da24 <_end+34e5d9ac/383e7fe8>

Trace; c0236795 <ide_xlate_1024+1b5/1e9>
Trace; c010736a <sys_execve+2/54>
Trace; c01074a4 <__down+54/bc>
Trace; c0237195 <proc_ide_read_settings+a5/168>
Trace; c0233b28 <ide_cmd+50/70>
Trace; c0234652 <unexpected_intr+56/98>
Trace; c0233694 <ide_end_drive_cmd+f0/2dc>
Trace; c022a10e <get_drives_info+362/458>
Trace; c022a69c <config_art_rwp_pio+bc/304>
Trace; c023015b <hwif_unregister+1b/b4>
Trace; c022f860 <init_hwif_data+13c/214>
Trace; c022fa71 <ide_dump_status+b5/444>
Trace; c022fd04 <ide_dump_status+348/444>
Trace; c02a002c <gdth_sync_event+ec/558>
Trace; c022a8f4 <config_chipset_for_pio+10/58>
Trace; c022a7b6 <config_art_rwp_pio+1d6/304>
Trace; c0117e5e <__set_personality+66/b8>
Trace; c0117d9b <unregister_exec_domain+3/60>
Trace; c0117c13 <default_handler+7/60>
Trace; c010990d <set_tss_desc+1/38>
Trace; c010bb44 <handle_vm86_fault+8f0/8f4>
Trace; c015a09f <locks_read_proc+3b/74>
Trace; c014f9a2 <free_kiobuf_bhs+4e/64>
Trace; c01540ca <set_brk+5e/78>
Trace; c01540f0 <padzero+c/24>
Trace; c0159b2b <meminfo_read_proc+d7/174>
Trace; c01545bc <load_elf_interp+19c/308>
Trace; c0151945 <sys_pivot_root+19d/30c>
Trace; c0151c64 <.text.lock.namespace+1b0/1c8>
Trace; c0131fc3 <balance_classzone+1cf/1f0>
Trace; c01321c8 <__alloc_pages+1e4/258>
Trace; c0151ab8 <.text.lock.namespace+4/1c8>
Trace; c0152194 <seq_lseek+b8/f8>
Trace; c0132385 <nr_free_highpages+9/20>
Trace; c01522f8 <seq_path+18/180>
Trace; c01328e4 <get_swap_page+c0/248>
Trace; c015eea7 <ext3_alloc_branch+19b/294>
Trace; c01330a6 <try_to_unuse+aa/36c>
Trace; c01522c8 <seq_printf+2c/44>
Trace; c0152752 <setxattr+146/180>
Trace; c01522c8 <seq_printf+2c/44>
Trace; c01259be <copy_page_range+15a/1d8>
Trace; c0125e97 <get_user_pages+ab/200>
Trace; c01504a7 <show_vfsmnt+20f/380>
Trace; c0130886 <swap_out+76/498>
Trace; c010857f <do_signal+a3/264>

<0>Kernel panic: Aiee, killing interrupt handler!

----------------------------------------------------------------

ksymoops 2.4.9 on i686 2.4.32-20060810-smp. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.32-20060810-smp/ (default)
-m /boot/System.map-2.4.32-20060810-smp (specified)

kernel BUG at sched.c:564!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01155aa>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 0110286
eax: 00000018 ebx: f7bb00fc ecx: 00000000 edx: 00000001
esi: e6a4a000 edi: 00000000 ebp: e6a4bd6c esp: e6a4bd48
ds: 0018 es: 0018 ss: 0018
Process Bonnie (pid: 2802, stackpage=e6a4b000)
Stack: c036009e e6a4a000 00000002 e6a4a000 e6a4bd74 c024d6b9 f7bb00fc
e6a4a000
f7bb0104 e6a4bd74 c01074bb 00000001 e6a2a000 f7bb0108 f7bb0108
f7bf44c0
00000001 f7bb00f0 f7bf487c c0107648 f7bb00fc fffffff5 00000000
c024e12a
Call Trace: [<c024d6b9>] [<c01074bb>] [<c0107648>] [<c024e12a>]
[<c024a8fc>]
[<c024b43e>] [<c024a458>] [<c0240723>] [<c0240d1c>] [<c0246dc7>]
[<c024647d>]
[<c02466c4>] [<c0246958>] [<c02b9140>] [<c0240fb9>] [<c0240e66>]
[<c011d046>]
[<c011cf28>] [<c011ccff>] [<c010a172>] [<c010c70c>]
Code: 0f 0b 34 02 96 00 36 c0 58 e9 45 fb ff ff 0f 0b 2d 02 96 00
Error (pclose_local): Oops_decode_part pclose failed 0x7f00
Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.trYJRB


>>EIP; c01155aa <schedule+4f2/514> <=====

>>ebx; f7bb00fc <_end+376b0084/383e7fe8>
>>esi; e6a4a000 <_end+26549f88/383e7fe8>
>>ebp; e6a4bd6c <_end+2654bcf4/383e7fe8>
>>esp; e6a4bd48 <_end+2654bcd0/383e7fe8>

Trace; c024d6b9 <aac_queue_get+95/c8>
Trace; c01074bb <__down+6b/bc>
Trace; c0107648 <__down_failed+8/c>
Trace; c024e12a <.text.lock.commsup+38/6e>
Trace; c024a8fc <aac_get_container_name+6c/f4>
Trace; c024b43e <aac_scsi_cmd+fe/36c>
Trace; c024a458 <aac_queuecommand+14/18>
Trace; c0240723 <scsi_dispatch_cmd+e7/260>
Trace; c0240d1c <scsi_done+0/9c>
Trace; c0246dc7 <scsi_request_fn+1bf/368>
Trace; c024647d <scsi_queue_next_request+45/10c>
Trace; c02466c4 <__scsi_end_request+180/1f8>
Trace; c0246958 <scsi_io_completion+144/3ac>
Trace; c02b9140 <rw_intr+48/198>
Trace; c0240fb9 <scsi_finish_command+a5/ac>
Trace; c0240e66 <scsi_bottom_half_handler+ae/d8>
Trace; c011d046 <bh_action+46/70>
Trace; c011cf28 <tasklet_hi_action+60/98>
Trace; c011ccff <do_softirq+c3/c8>
Trace; c010a172 <do_IRQ+ca/cc>
Trace; c010c70c <call_do_IRQ+5/d>

Attachment: signature.asc
Description: This is a digitally signed message part