[git patches] libata updates
From: Jeff Garzik
Date: Thu Dec 14 2006 - 18:28:22 EST
Includes some pre-window-closing stuff (new drivers), but I was waiting
on some bug fixes before pushing.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 20 ++-
drivers/ata/Makefile | 2 +
drivers/ata/ahci.c | 2 -
drivers/ata/ata_piix.c | 24 ++-
drivers/ata/libata-core.c | 16 +-
drivers/ata/libata-scsi.c | 4 +-
drivers/ata/pata_ali.c | 4 +-
drivers/ata/pata_cs5520.c | 2 +-
drivers/ata/pata_cs5530.c | 8 +-
drivers/ata/pata_hpt366.c | 2 +-
drivers/ata/pata_hpt37x.c | 4 +-
drivers/ata/pata_hpt3x3.c | 2 +-
drivers/ata/pata_it8213.c | 354 +++++++++++++++++++++++++
drivers/ata/pata_jmicron.c | 2 +-
drivers/ata/pata_marvell.c | 4 +-
drivers/ata/pata_mpc52xx.c | 563 ++++++++++++++++++++++++++++++++++++++++
drivers/ata/pata_serverworks.c | 2 +-
drivers/ata/pata_sil680.c | 2 +-
drivers/ata/pata_sis.c | 2 +-
drivers/ata/pata_via.c | 10 +-
drivers/ata/pata_winbond.c | 16 +-
drivers/ata/sata_nv.c | 18 +-
drivers/ata/sata_sis.c | 79 ++++--
drivers/ata/sata_svw.c | 41 +++-
drivers/ata/sata_via.c | 2 +-
include/linux/libata.h | 2 +-
include/linux/pci_ids.h | 1 +
27 files changed, 1099 insertions(+), 89 deletions(-)
create mode 100644 drivers/ata/pata_it8213.c
create mode 100644 drivers/ata/pata_mpc52xx.c
Alan (1):
pata_it8213: Add new driver for the IT8213 card
Jason Gaston (1):
ata_piix: IDE mode SATA patch for Intel ICH9
Jeff Garzik (3):
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
[libata] trim trailing whitespace
[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
Sylvain Munaut (1):
libata: Add support for the MPC52xx ATA controller
Tejun Heo (3):
ata_piix: use piix_host_stop() in ich_pata_ops
libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
ahci: do not mangle saved HOST_CAP while resetting controller
Uwe Koziolek (1):
sata_sis: support SiS966/966L
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 984ab28..fb1de86 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -292,7 +292,7 @@ config PATA_ISAPNP
If unsure, say N.
config PATA_IT821X
- tristate "IT821x PATA support (Experimental)"
+ tristate "IT8211/2 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the ITE 8211 and 8212
@@ -301,6 +301,15 @@ config PATA_IT821X
If unsure, say N.
+config PATA_IT8213
+ tristate "IT8213 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ITE 821 PATA
+ controllers via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
@@ -337,6 +346,15 @@ config PATA_MARVELL
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
config PATA_MPIIX
tristate "Intel PATA MPIIX support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index bc3d81a..a0df15d 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -33,11 +33,13 @@ obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
+obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
obj-$(CONFIG_PATA_OPTI) += pata_opti.o
obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f36da48..dbae6d9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -645,8 +645,6 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
u32 cap_save, impl_save, tmp;
cap_save = readl(mmio + HOST_CAP);
- cap_save &= ( (1<<28) | (1<<17) );
- cap_save |= (1 << 27);
impl_save = readl(mmio + HOST_PORTS_IMPL);
/* global controller reset */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c7de0bb..7959e4c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -226,14 +226,26 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
- /* Enterprise Southbridge 2 (where's the datasheet?) */
+ /* Enterprise Southbridge 2 (631xESB/632xESB) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
+ /* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
- /* SATA Controller 2 IDE (ICH8, ditto) */
+ /* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
- /* Mobile SATA Controller IDE (ICH8M, ditto) */
+ /* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ } /* terminate list */
};
@@ -330,7 +342,7 @@ static const struct ata_port_operations ich_pata_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .host_stop = piix_host_stop,
};
static const struct ata_port_operations piix_sata_ops = {
@@ -620,7 +632,7 @@ static int piix_pata_prereset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
-
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 011c0a8..fd20e7a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1332,7 +1332,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
}
/**
- * ata_exec_internal_sg - execute libata internal command
+ * ata_exec_internal - execute libata internal command
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
@@ -1353,11 +1353,17 @@ unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen)
{
- struct scatterlist sg;
+ struct scatterlist *psg = NULL, sg;
+ unsigned int n_elem = 0;
- sg_init_one(&sg, buf, buflen);
+ if (dma_dir != DMA_NONE) {
+ WARN_ON(!buf);
+ sg_init_one(&sg, buf, buflen);
+ psg = &sg;
+ n_elem++;
+ }
- return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1);
+ return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem);
}
/**
@@ -5773,7 +5779,7 @@ int ata_device_add(const struct ata_probe_ent *ent)
int rc;
DPRINTK("ENTER\n");
-
+
if (ent->irq == 0) {
dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
return 0;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 664e137..a4790be 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1539,7 +1539,7 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out)
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
- buf = kmap_atomic(sg->page, KM_USER0) + sg->offset;
+ buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
buflen = sg->length;
} else {
buf = cmd->request_buffer;
@@ -1567,7 +1567,7 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf)
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
- kunmap_atomic(buf - sg->offset, KM_USER0);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index c5d61d1..2035417 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -504,7 +504,7 @@ static struct ata_port_operations ali_c5_port_ops = {
* Perform the setup on the device that must be done both at boot
* and at resume time.
*/
-
+
static void ali_init_chipset(struct pci_dev *pdev)
{
u8 rev, tmp;
@@ -655,7 +655,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
port_info[0] = port_info[1] = &info_c5;
ali_init_chipset(pdev);
-
+
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
/* Are we paired with a UDMA capable chip */
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 9f165a8..476b879 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -305,7 +305,7 @@ static void __devexit cs5520_remove_one(struct pci_dev *pdev)
* Do any reconfiguration work needed by a resume from RAM. We need
* to restore DMA mode support on BIOSen which disabled it
*/
-
+
static int cs5520_reinit_one(struct pci_dev *pdev)
{
u8 pcicfg;
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 1c62801..9b9d911 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -247,7 +247,7 @@ static int cs5530_is_palmax(void)
* Perform the chip initialisation work that is shared between both
* setup and resume paths
*/
-
+
static int cs5530_init_chip(void)
{
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
@@ -357,11 +357,11 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cs5530_port_ops
};
static struct ata_port_info *port_info[2] = { &info, &info };
-
+
/* Chip initialisation */
if (cs5530_init_chip())
return -ENODEV;
-
+
if (cs5530_is_palmax())
port_info[1] = &info_palmax_secondary;
@@ -375,7 +375,7 @@ static int cs5530_reinit_one(struct pci_dev *pdev)
BUG_ON(cs5530_init_chip());
return ata_pci_device_resume(pdev);
}
-
+
static const struct pci_device_id cs5530[] = {
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 2663599..8cf167e 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -232,7 +232,7 @@ static int hpt36x_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
return -ENOENT;
-
+
pci_read_config_byte(pdev, 0x5A, &ata66);
if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 47082df..e51651b 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -459,7 +459,7 @@ static int hpt37x_pre_reset(struct ata_port *ap)
};
if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
return -ENOENT;
-
+
pci_read_config_byte(pdev, 0x5B, &scr2);
pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
/* Cable register now active */
@@ -504,7 +504,7 @@ static int hpt374_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
return -ENOENT;
-
+
/* Do the extra channel work */
pci_read_config_word(pdev, 0x52, &mcr3);
pci_read_config_word(pdev, 0x56, &mcr6);
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 5f1d385..5caf167 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -164,7 +164,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
*
* Perform the setup required at boot and on resume.
*/
-
+
static void hpt3x3_init_chipset(struct pci_dev *dev)
{
u16 cmd;
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
new file mode 100644
index 0000000..7e9a416
--- /dev/null
+++ b/drivers/ata/pata_it8213.c
@@ -0,0 +1,354 @@
+/*
+ * pata_it8213.c - iTE Tech. Inc. IT8213 PATA driver
+ *
+ * The IT8213 is a very Intel ICH like device for timing purposes, having
+ * a similar register layout and the same split clock arrangement. Cable
+ * detection is different, and it does not have slave channels or all the
+ * clutter of later ICH/SATA setups.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME "pata_it8213"
+#define DRV_VERSION "0.0.2"
+
+/**
+ * it8213_pre_reset - check for 40/80 pin
+ * @ap: Port
+ *
+ * Perform cable detection for the 8213 ATA interface. This is
+ * different to the PIIX arrangement
+ */
+
+static int it8213_pre_reset(struct ata_port *ap)
+{
+ static const struct pci_bits it8213_enable_bits[] = {
+ { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
+
+ if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ pci_read_config_byte(pdev, 0x42, &tmp);
+ if (tmp & 2) /* The initial docs are incorrect */
+ ap->cbl = ATA_CBL_PATA40;
+ else
+ ap->cbl = ATA_CBL_PATA80;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * it8213_probe_reset - Probe specified port on PATA host controller
+ * @ap: Port to probe
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void it8213_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * it8213_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+ u16 idetm_data;
+ int control = 0;
+
+ /*
+ * See Intel Document 298600-004 for the timing programing rules
+ * for PIIX/ICH. The 8213 is a clone so very similar
+ */
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ if (pio > 2)
+ control |= 1; /* TIME1 enable */
+ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
+ control |= 2; /* IORDY enable */
+ /* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */
+ if (adev->class != ATA_DEV_ATA)
+ control |= 4;
+
+ pci_read_config_word(dev, idetm_port, &idetm_data);
+
+ /* Enable PPE, IE and TIME as appropriate */
+
+ if (adev->devno == 0) {
+ idetm_data &= 0xCCF0;
+ idetm_data |= control;
+ idetm_data |= (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ } else {
+ u8 slave_data;
+
+ idetm_data &= 0xCC0F;
+ idetm_data |= (control << 4);
+
+ /* Slave timing in seperate register */
+ pci_read_config_byte(dev, 0x44, &slave_data);
+ slave_data &= 0xF0;
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
+ pci_write_config_byte(dev, 0x44, slave_data);
+ }
+
+ idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ pci_write_config_word(dev, idetm_port, idetm_data);
+}
+
+/**
+ * it8213_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ *
+ * Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ * This device is basically an ICH alike.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ u16 master_data;
+ u8 speed = adev->dma_mode;
+ int devid = adev->devno;
+ u8 udma_enable;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ pci_read_config_word(dev, 0x40, &master_data);
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
+ if (speed >= XFER_UDMA_0) {
+ unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ u16 udma_timing;
+ u16 ideconf;
+ int u_clock, u_speed;
+
+ /* Clocks follow the PIIX style */
+ u_speed = min(2 - (udma & 1), udma);
+ if (udma == 5)
+ u_clock = 0x1000; /* 100Mhz */
+ else if (udma > 2)
+ u_clock = 1; /* 66Mhz */
+ else
+ u_clock = 0; /* 33Mhz */
+
+ udma_enable |= (1 << devid);
+
+ /* Load the UDMA mode number */
+ pci_read_config_word(dev, 0x4A, &udma_timing);
+ udma_timing &= ~(3 << (4 * devid));
+ udma_timing |= (udma & 3) << (4 * devid);
+ pci_write_config_word(dev, 0x4A, udma_timing);
+
+ /* Load the clock selection */
+ pci_read_config_word(dev, 0x54, &ideconf);
+ ideconf &= ~(0x1001 << devid);
+ ideconf |= u_clock << devid;
+ pci_write_config_word(dev, 0x54, ideconf);
+ } else {
+ /*
+ * MWDMA is driven by the PIO timings. We must also enable
+ * IORDY unconditionally along with TIME1. PPE has already
+ * been set when the PIO timing was set.
+ */
+ unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
+ unsigned int control;
+ u8 slave_data;
+ static const unsigned int needed_pio[3] = {
+ XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+ };
+ int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+ control = 3; /* IORDY|TIME1 */
+
+ /* If the drive MWDMA is faster than it can do PIO then
+ we must force PIO into PIO0 */
+
+ if (adev->pio_mode < needed_pio[mwdma])
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
+
+ if (devid) { /* Slave */
+ master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
+ master_data |= control << 4;
+ pci_read_config_byte(dev, 0x44, &slave_data);
+ slave_data &= (0x0F + 0xE1 * ap->port_no);
+ /* Load the matching timing */
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+ pci_write_config_byte(dev, 0x44, slave_data);
+ } else { /* Master */
+ master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
+ and master timing bits */
+ master_data |= control;
+ master_data |=
+ (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ }
+ udma_enable &= ~(1 << devid);
+ pci_write_config_word(dev, 0x40, master_data);
+ }
+ pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+static struct scsi_host_template it8213_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
+};
+
+static const struct ata_port_operations it8213_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = it8213_set_piomode,
+ .set_dmamode = it8213_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = it8213_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+
+/**
+ * it8213_init_one - Register 8213 ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in it8213_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ static struct ata_port_info info = {
+ .sht = &it8213_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x1f, /* UDMA 100 */
+ .port_ops = &it8213_ops,
+ };
+ static struct ata_port_info *port_info[2] = { &info, &info };
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ /* Current IT8213 stuff is single port */
+ return ata_pci_init_one(pdev, port_info, 1);
+}
+
+static const struct pci_device_id it8213_pci_tbl[] = {
+ { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver it8213_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = it8213_pci_tbl,
+ .probe = it8213_init_one,
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+};
+
+static int __init it8213_init(void)
+{
+ return pci_register_driver(&it8213_pci_driver);
+}
+
+static void __exit it8213_exit(void)
+{
+ pci_unregister_driver(&it8213_pci_driver);
+}
+
+module_init(it8213_init);
+module_exit(it8213_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for the ITE 8213");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 2d661cb..efb1b6d 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -229,7 +229,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
static int jmicron_reinit_one(struct pci_dev *pdev)
{
u32 reg;
-
+
switch(pdev->device) {
case PCI_DEVICE_ID_JMICRON_JMB368:
break;
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 1c810ea..af93533 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -45,10 +45,10 @@ static int marvell_pre_reset(struct ata_port *ap)
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, readb(barp + i));
printk("\n");
-
+
devices = readl(barp + 0x0C);
pci_iounmap(pdev, barp);
-
+
if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
(!(devices & 0x10))) /* PATA enable ? */
return -ENOENT;
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
new file mode 100644
index 0000000..8b7019a
--- /dev/null
+++ b/drivers/ata/pata_mpc52xx.c
@@ -0,0 +1,563 @@
+/*
+ * drivers/ata/pata_mpc52xx.c
+ *
+ * libata driver for the Freescale MPC52xx on-chip IDE interface
+ *
+ * Copyright (C) 2006 Sylvain Munaut <tnt@xxxxxxxxxx>
+ * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/libata.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/prom.h>
+#include <asm/of_platform.h>
+#include <asm/mpc52xx.h>
+
+
+#define DRV_NAME "mpc52xx_ata"
+#define DRV_VERSION "0.1.0"
+
+
+/* Private structures used by the driver */
+struct mpc52xx_ata_timings {
+ u32 pio1;
+ u32 pio2;
+};
+
+struct mpc52xx_ata_priv {
+ unsigned int ipb_period;
+ struct mpc52xx_ata __iomem * ata_regs;
+ int ata_irq;
+ struct mpc52xx_ata_timings timings[2];
+ int csel;
+};
+
+
+/* ATAPI-4 PIO specs (in ns) */
+static const int ataspec_t0[5] = {600, 383, 240, 180, 120};
+static const int ataspec_t1[5] = { 70, 50, 30, 30, 25};
+static const int ataspec_t2_8[5] = {290, 290, 290, 80, 70};
+static const int ataspec_t2_16[5] = {165, 125, 100, 80, 70};
+static const int ataspec_t2i[5] = { 0, 0, 0, 70, 25};
+static const int ataspec_t4[5] = { 30, 20, 15, 10, 10};
+static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
+
+#define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c)))
+
+
+/* Bit definitions inside the registers */
+#define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */
+#define MPC52xx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */
+#define MPC52xx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt in PIO */
+#define MPC52xx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports IORDY protocol */
+
+#define MPC52xx_ATA_HOSTSTAT_TIP 0x80000000UL /* Transaction in progress */
+#define MPC52xx_ATA_HOSTSTAT_UREP 0x40000000UL /* UDMA Read Extended Pause */
+#define MPC52xx_ATA_HOSTSTAT_RERR 0x02000000UL /* Read Error */
+#define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */
+
+#define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */
+
+#define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */
+#define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */
+#define MPC52xx_ATA_DMAMODE_UDMA 0x04 /* UDMA enabled */
+#define MPC52xx_ATA_DMAMODE_IE 0x08 /* Enable drive interrupt to CPU in DMA mode */
+#define MPC52xx_ATA_DMAMODE_FE 0x10 /* FIFO Flush enable in Rx mode */
+#define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */
+#define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */
+
+
+/* Structure of the hardware registers */
+struct mpc52xx_ata {
+
+ /* Host interface registers */
+ u32 config; /* ATA + 0x00 Host configuration */
+ u32 host_status; /* ATA + 0x04 Host controller status */
+ u32 pio1; /* ATA + 0x08 PIO Timing 1 */
+ u32 pio2; /* ATA + 0x0c PIO Timing 2 */
+ u32 mdma1; /* ATA + 0x10 MDMA Timing 1 */
+ u32 mdma2; /* ATA + 0x14 MDMA Timing 2 */
+ u32 udma1; /* ATA + 0x18 UDMA Timing 1 */
+ u32 udma2; /* ATA + 0x1c UDMA Timing 2 */
+ u32 udma3; /* ATA + 0x20 UDMA Timing 3 */
+ u32 udma4; /* ATA + 0x24 UDMA Timing 4 */
+ u32 udma5; /* ATA + 0x28 UDMA Timing 5 */
+ u32 share_cnt; /* ATA + 0x2c ATA share counter */
+ u32 reserved0[3];
+
+ /* FIFO registers */
+ u32 fifo_data; /* ATA + 0x3c */
+ u8 fifo_status_frame; /* ATA + 0x40 */
+ u8 fifo_status; /* ATA + 0x41 */
+ u16 reserved7[1];
+ u8 fifo_control; /* ATA + 0x44 */
+ u8 reserved8[5];
+ u16 fifo_alarm; /* ATA + 0x4a */
+ u16 reserved9;
+ u16 fifo_rdp; /* ATA + 0x4e */
+ u16 reserved10;
+ u16 fifo_wrp; /* ATA + 0x52 */
+ u16 reserved11;
+ u16 fifo_lfrdp; /* ATA + 0x56 */
+ u16 reserved12;
+ u16 fifo_lfwrp; /* ATA + 0x5a */
+
+ /* Drive TaskFile registers */
+ u8 tf_control; /* ATA + 0x5c TASKFILE Control/Alt Status */
+ u8 reserved13[3];
+ u16 tf_data; /* ATA + 0x60 TASKFILE Data */
+ u16 reserved14;
+ u8 tf_features; /* ATA + 0x64 TASKFILE Features/Error */
+ u8 reserved15[3];
+ u8 tf_sec_count; /* ATA + 0x68 TASKFILE Sector Count */
+ u8 reserved16[3];
+ u8 tf_sec_num; /* ATA + 0x6c TASKFILE Sector Number */
+ u8 reserved17[3];
+ u8 tf_cyl_low; /* ATA + 0x70 TASKFILE Cylinder Low */
+ u8 reserved18[3];
+ u8 tf_cyl_high; /* ATA + 0x74 TASKFILE Cylinder High */
+ u8 reserved19[3];
+ u8 tf_dev_head; /* ATA + 0x78 TASKFILE Device/Head */
+ u8 reserved20[3];
+ u8 tf_command; /* ATA + 0x7c TASKFILE Command/Status */
+ u8 dma_mode; /* ATA + 0x7d ATA Host DMA Mode configuration */
+ u8 reserved21[2];
+};
+
+
+/* ======================================================================== */
+/* Aux fns */
+/* ======================================================================== */
+
+
+/* MPC52xx low level hw control */
+
+static int
+mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
+{
+ struct mpc52xx_ata_timings *timing = &priv->timings[dev];
+ unsigned int ipb_period = priv->ipb_period;
+ unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta;
+
+ if ((pio<0) || (pio>4))
+ return -EINVAL;
+
+ t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]);
+ t1 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t1[pio]);
+ t2_8 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_8[pio]);
+ t2_16 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_16[pio]);
+ t2i = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2i[pio]);
+ t4 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t4[pio]);
+ ta = CALC_CLKCYC(ipb_period, 1000 * ataspec_ta[pio]);
+
+ timing->pio1 = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8) | (t2i);
+ timing->pio2 = (t4 << 24) | (t1 << 16) | (ta << 8);
+
+ return 0;
+}
+
+static void
+mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device)
+{
+ struct mpc52xx_ata __iomem *regs = priv->ata_regs;
+ struct mpc52xx_ata_timings *timing = &priv->timings[device];
+
+ out_be32(®s->pio1, timing->pio1);
+ out_be32(®s->pio2, timing->pio2);
+ out_be32(®s->mdma1, 0);
+ out_be32(®s->mdma2, 0);
+ out_be32(®s->udma1, 0);
+ out_be32(®s->udma2, 0);
+ out_be32(®s->udma3, 0);
+ out_be32(®s->udma4, 0);
+ out_be32(®s->udma5, 0);
+
+ priv->csel = device;
+}
+
+static int
+mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv)
+{
+ struct mpc52xx_ata __iomem *regs = priv->ata_regs;
+ int tslot;
+
+ /* Clear share_cnt (all sample code do this ...) */
+ out_be32(®s->share_cnt, 0);
+
+ /* Configure and reset host */
+ out_be32(®s->config,
+ MPC52xx_ATA_HOSTCONF_IE |
+ MPC52xx_ATA_HOSTCONF_IORDY |
+ MPC52xx_ATA_HOSTCONF_SMR |
+ MPC52xx_ATA_HOSTCONF_FR);
+
+ udelay(10);
+
+ out_be32(®s->config,
+ MPC52xx_ATA_HOSTCONF_IE |
+ MPC52xx_ATA_HOSTCONF_IORDY);
+
+ /* Set the time slot to 1us */
+ tslot = CALC_CLKCYC(priv->ipb_period, 1000000);
+ out_be32(®s->share_cnt, tslot << 16 );
+
+ /* Init timings to PIO0 */
+ memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings));
+
+ mpc52xx_ata_compute_pio_timings(priv, 0, 0);
+ mpc52xx_ata_compute_pio_timings(priv, 1, 0);
+
+ mpc52xx_ata_apply_timings(priv, 0);
+
+ return 0;
+}
+
+
+/* ======================================================================== */
+/* libata driver */
+/* ======================================================================== */
+
+static void
+mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct mpc52xx_ata_priv *priv = ap->host->private_data;
+ int pio, rv;
+
+ pio = adev->pio_mode - XFER_PIO_0;
+
+ rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio);
+
+ if (rv) {
+ printk(KERN_ERR DRV_NAME
+ ": Trying to select invalid PIO mode %d\n", pio);
+ return;
+ }
+
+ mpc52xx_ata_apply_timings(priv, adev->devno);
+}
+static void
+mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
+{
+ struct mpc52xx_ata_priv *priv = ap->host->private_data;
+
+ if (device != priv->csel)
+ mpc52xx_ata_apply_timings(priv, device);
+
+ ata_std_dev_select(ap,device);
+}
+
+static void
+mpc52xx_ata_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
+ ata_std_postreset);
+}
+
+
+
+static struct scsi_host_template mpc52xx_ata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations mpc52xx_ata_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = mpc52xx_ata_set_piomode,
+ .dev_select = mpc52xx_ata_dev_select,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = mpc52xx_ata_error_handler,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_mmio_data_xfer,
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static struct ata_probe_ent mpc52xx_ata_probe_ent = {
+ .port_ops = &mpc52xx_ata_port_ops,
+ .sht = &mpc52xx_ata_sht,
+ .n_ports = 1,
+ .pio_mask = 0x1f, /* Up to PIO4 */
+ .mwdma_mask = 0x00, /* No MWDMA */
+ .udma_mask = 0x00, /* No UDMA */
+ .port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ .irq_flags = 0,
+};
+
+static int __devinit
+mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
+{
+ struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent;
+ struct ata_ioports *aio = &ae->port[0];
+ int rv;
+
+ INIT_LIST_HEAD(&ae->node);
+ ae->dev = dev;
+ ae->irq = priv->ata_irq;
+
+ aio->cmd_addr = 0; /* Don't have a classic reg block */
+ aio->altstatus_addr = (unsigned long)&priv->ata_regs->tf_control;
+ aio->ctl_addr = (unsigned long)&priv->ata_regs->tf_control;
+ aio->data_addr = (unsigned long)&priv->ata_regs->tf_data;
+ aio->error_addr = (unsigned long)&priv->ata_regs->tf_features;
+ aio->feature_addr = (unsigned long)&priv->ata_regs->tf_features;
+ aio->nsect_addr = (unsigned long)&priv->ata_regs->tf_sec_count;
+ aio->lbal_addr = (unsigned long)&priv->ata_regs->tf_sec_num;
+ aio->lbam_addr = (unsigned long)&priv->ata_regs->tf_cyl_low;
+ aio->lbah_addr = (unsigned long)&priv->ata_regs->tf_cyl_high;
+ aio->device_addr = (unsigned long)&priv->ata_regs->tf_dev_head;
+ aio->status_addr = (unsigned long)&priv->ata_regs->tf_command;
+ aio->command_addr = (unsigned long)&priv->ata_regs->tf_command;
+
+ ae->private_data = priv;
+
+ rv = ata_device_add(ae);
+
+ return rv ? 0 : -EINVAL;
+}
+
+static struct mpc52xx_ata_priv *
+mpc52xx_ata_remove_one(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct mpc52xx_ata_priv *priv = host->private_data;
+
+ ata_host_remove(host);
+
+ return priv;
+}
+
+
+/* ======================================================================== */
+/* OF Platform driver */
+/* ======================================================================== */
+
+static int __devinit
+mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
+{
+ unsigned int ipb_freq;
+ struct resource res_mem;
+ int ata_irq = NO_IRQ;
+ struct mpc52xx_ata __iomem *ata_regs = NULL;
+ struct mpc52xx_ata_priv *priv = NULL;
+ int rv;
+
+ /* Get ipb frequency */
+ ipb_freq = mpc52xx_find_ipb_freq(op->node);
+ if (!ipb_freq) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Unable to find IPB Bus frequency\n" );
+ return -ENODEV;
+ }
+
+ /* Get IRQ and register */
+ rv = of_address_to_resource(op->node, 0, &res_mem);
+ if (rv) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while parsing device node resource\n" );
+ return rv;
+ }
+
+ ata_irq = irq_of_parse_and_map(op->node, 0);
+ if (ata_irq == NO_IRQ) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while mapping the irq\n");
+ return -EINVAL;
+ }
+
+ /* Request mem region */
+ if (!request_mem_region(res_mem.start,
+ sizeof(struct mpc52xx_ata), DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while requesting mem region\n");
+ irq_dispose_mapping(ata_irq);
+ return -EBUSY;
+ }
+
+ /* Remap registers */
+ ata_regs = ioremap(res_mem.start, sizeof(struct mpc52xx_ata));
+ if (!ata_regs) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while mapping register set\n");
+ rv = -ENOMEM;
+ goto err;
+ }
+
+ /* Prepare our private structure */
+ priv = kmalloc(sizeof(struct mpc52xx_ata_priv), GFP_ATOMIC);
+ if (!priv) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while allocating private structure\n");
+ rv = -ENOMEM;
+ goto err;
+ }
+
+ priv->ipb_period = 1000000000 / (ipb_freq / 1000);
+ priv->ata_regs = ata_regs;
+ priv->ata_irq = ata_irq;
+ priv->csel = -1;
+
+ /* Init the hw */
+ rv = mpc52xx_ata_hw_init(priv);
+ if (rv) {
+ printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+ goto err;
+ }
+
+ /* Register ourselves to libata */
+ rv = mpc52xx_ata_init_one(&op->dev, priv);
+ if (rv) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while registering to ATA layer\n");
+ return rv;
+ }
+
+ /* Done */
+ return 0;
+
+ /* Error path */
+err:
+ kfree(priv);
+
+ if (ata_regs)
+ iounmap(ata_regs);
+
+ release_mem_region(res_mem.start, sizeof(struct mpc52xx_ata));
+
+ irq_dispose_mapping(ata_irq);
+
+ return rv;
+}
+
+static int
+mpc52xx_ata_remove(struct of_device *op)
+{
+ struct mpc52xx_ata_priv *priv;
+ struct resource res_mem;
+ int rv;
+
+ /* Unregister */
+ priv = mpc52xx_ata_remove_one(&op->dev);
+
+ /* Free everything */
+ iounmap(priv->ata_regs);
+
+ rv = of_address_to_resource(op->node, 0, &res_mem);
+ if (rv) {
+ printk(KERN_ERR DRV_NAME ": "
+ "Error while parsing device node resource\n");
+ printk(KERN_ERR DRV_NAME ": "
+ "Zone may not be properly released\n");
+ } else
+ release_mem_region(res_mem.start, sizeof(struct mpc52xx_ata));
+
+ irq_dispose_mapping(priv->ata_irq);
+
+ kfree(priv);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int
+mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
+{
+ return 0; /* FIXME : What to do here ? */
+}
+
+static int
+mpc52xx_ata_resume(struct of_device *op)
+{
+ return 0; /* FIXME : What to do here ? */
+}
+
+#endif
+
+
+static struct of_device_id mpc52xx_ata_of_match[] = {
+ {
+ .compatible = "mpc5200-ata",
+ },
+ {
+ .compatible = "mpc52xx-ata",
+ },
+ {},
+};
+
+
+static struct of_platform_driver mpc52xx_ata_of_platform_driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .match_table = mpc52xx_ata_of_match,
+ .probe = mpc52xx_ata_probe,
+ .remove = mpc52xx_ata_remove,
+#ifdef CONFIG_PM
+ .suspend = mpc52xx_ata_suspend,
+ .resume = mpc52xx_ata_resume,
+#endif
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+
+/* ======================================================================== */
+/* Module */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_ata_init(void)
+{
+ printk(KERN_INFO "ata: MPC52xx IDE/ATA libata driver\n");
+ return of_register_platform_driver(&mpc52xx_ata_of_platform_driver);
+}
+
+static void __exit
+mpc52xx_ata_exit(void)
+{
+ of_unregister_platform_driver(&mpc52xx_ata_of_platform_driver);
+}
+
+module_init(mpc52xx_ata_init);
+module_exit(mpc52xx_ata_exit);
+
+MODULE_AUTHOR("Sylvain Munaut <tnt@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match);
+MODULE_VERSION(DRV_VERSION);
+
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index f02b6a3..8019197 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -559,7 +559,7 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
{
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
-
+
switch (pdev->device)
{
case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 32cf0bf..ae07f63 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -270,7 +270,7 @@ static struct ata_port_operations sil680_port_ops = {
* is powered up on boot and when we resume in case we resumed from RAM.
* Returns the final clock settings.
*/
-
+
static u8 sil680_init_chip(struct pci_dev *pdev)
{
u32 class_rev = 0;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 916cedb..c434c4e 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -847,7 +847,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
struct sis_chipset *chipset = NULL;
static struct sis_chipset sis_chipsets[] = {
-
+
{ 0x0968, &sis_info133 },
{ 0x0966, &sis_info133 },
{ 0x0965, &sis_info133 },
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index cc09d47..9905fa8 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -384,11 +384,11 @@ static struct ata_port_operations via_port_ops_noirq = {
static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
{
u8 enable;
-
+
/* 0x40 low bits indicate enabled channels */
pci_read_config_byte(pdev, 0x40 , &enable);
enable &= 3;
-
+
if (flags & VIA_SET_FIFO) {
u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
u8 fifo;
@@ -509,7 +509,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
/* Initialise the FIFO for the enabled channels. */
via_config_fifo(pdev, config->flags);
-
+
/* Clock set up */
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
@@ -568,7 +568,7 @@ static int via_reinit_one(struct pci_dev *pdev)
u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
const struct via_isa_bridge *config = host->private_data;
-
+
via_config_fifo(pdev, config->flags);
if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
@@ -583,7 +583,7 @@ static int via_reinit_one(struct pci_dev *pdev)
timing &= ~0x80008;
pci_write_config_dword(pdev, 0x50, timing);
}
- return ata_pci_device_resume(pdev);
+ return ata_pci_device_resume(pdev);
}
static const struct pci_device_id via[] = {
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 3ea345c..cd5560f 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -5,7 +5,7 @@
* Support for the Winbond 83759A when operating in advanced mode.
* Multichip mode is not currently supported.
*/
-
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -69,7 +69,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
reg = winbond_readcfg(winbond->config, 0x81);
-
+
/* Get the timing data in cycles */
if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
@@ -80,9 +80,9 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(winbond->config, timing, reg);
-
+
/* Load the setup timing */
-
+
reg = 0x35;
if (adev->class != ATA_DEV_ATA)
reg |= 0x08; /* FIFO off */
@@ -194,13 +194,13 @@ static __init int winbond_init_one(unsigned long port)
winbond_writecfg(port, 0x85, reg);
reg = winbond_readcfg(port, 0x81);
-
+
if (!(reg & 0x03)) /* Disabled */
return 0;
for (i = 0; i < 2 ; i ++) {
- if (reg & (1 << i)) {
+ if (reg & (1 << i)) {
/*
* Fill in a probe structure first of all
*/
@@ -217,7 +217,7 @@ static __init int winbond_init_one(unsigned long port)
ae.pio_mask = 0x1F;
ae.sht = &winbond_sht;
-
+
ae.n_ports = 1;
ae.irq = 14 + i;
ae.irq_flags = 0;
@@ -257,7 +257,7 @@ static __init int winbond_init(void)
int ct = 0;
int i;
-
+
if (probe_winbond == 0)
return -ENODEV;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0d316eb..49f8ff2 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -536,7 +536,7 @@ static void nv_adma_mode(struct ata_port *ap)
if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
return;
-
+
WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
tmp = readw(mmio + NV_ADMA_CTL);
@@ -576,7 +576,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
/* Subtract 1 since an extra entry may be needed for padding, see
libata-scsi.c */
sg_tablesize = LIBATA_MAX_PRD - 1;
-
+
/* Since the legacy DMA engine is in use, we need to disable ADMA
on the port. */
adma_enable = 0;
@@ -588,7 +588,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
adma_enable = 1;
}
-
+
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg);
if(ap->port_no == 1)
@@ -597,7 +597,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
else
config_mask = NV_MCP_SATA_CFG_20_PORT0_EN |
NV_MCP_SATA_CFG_20_PORT0_PWB_EN;
-
+
if(adma_enable) {
new_reg = current_reg | config_mask;
pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
@@ -606,10 +606,10 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
new_reg = current_reg & ~config_mask;
pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
}
-
+
if(current_reg != new_reg)
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
-
+
blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
@@ -822,13 +822,13 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
handled++; /* irq handled if we got here */
}
}
-
+
if(notifier_clears[0] || notifier_clears[1]) {
/* Note: Both notifier clear registers must be written
if either is set, even if one is zero, according to NVIDIA. */
- writel(notifier_clears[0],
+ writel(notifier_clears[0],
nv_adma_notifier_clear_block(host->ports[0]));
- writel(notifier_clears[1],
+ writel(notifier_clears[1],
nv_adma_notifier_clear_block(host->ports[1]));
}
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9c25a1e..c90fb13 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -42,7 +42,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sis"
-#define DRV_VERSION "0.6"
+#define DRV_VERSION "0.7"
enum {
sis_180 = 0,
@@ -67,9 +67,12 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id sis_pci_tbl[] = {
- { PCI_VDEVICE(SI, 0x180), sis_180 },
- { PCI_VDEVICE(SI, 0x181), sis_180 },
- { PCI_VDEVICE(SI, 0x182), sis_180 },
+ { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
+ { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
{ } /* terminate list */
};
@@ -142,24 +145,32 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device)
+static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, struct pci_dev *pdev)
{
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
if (port_no) {
- if (device == 0x182)
- addr += SIS182_SATA1_OFS;
- else
- addr += SIS180_SATA1_OFS;
+ switch (pdev->device) {
+ case 0x0180:
+ case 0x0181:
+ addr += SIS180_SATA1_OFS;
+ break;
+
+ case 0x0182:
+ case 0x0183:
+ case 0x1182:
+ case 0x1183:
+ addr += SIS182_SATA1_OFS;
+ break;
+ }
}
-
return addr;
}
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
+ unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev);
u32 val, val2 = 0;
u8 pmr;
@@ -170,7 +181,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
pci_read_config_dword(pdev, cfg_addr, &val);
- if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
+ (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
@@ -179,7 +191,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device);
+ unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev);
u8 pmr;
if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */
@@ -189,7 +201,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
pci_write_config_dword(pdev, cfg_addr, val);
- if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
+ (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
pci_write_config_dword(pdev, cfg_addr+0x10, val);
}
@@ -209,7 +222,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
+ (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return (val | val2) & 0xfffffffb;
@@ -229,7 +243,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
sis_scr_cfg_write(ap, sc_reg, val);
else {
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
+ (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
}
}
@@ -243,7 +258,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
int pci_dev_busy = 0;
u8 pmr;
- u8 port2_start;
+ u8 port2_start = 0x20;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -282,28 +297,42 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
}
pci_read_config_byte(pdev, SIS_PMR, &pmr);
- if (ent->device != 0x182) {
+ switch (ent->device) {
+ case 0x0180:
+ case 0x0181:
if ((pmr & SIS_PMR_COMBINED) == 0) {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181/964 chipset in SATA mode\n");
port2_start = 64;
- }
- else {
+ } else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
port2_start=0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
- }
- else {
+ break;
+
+ case 0x0182:
+ case 0x0183:
pci_read_config_dword ( pdev, 0x6C, &val);
if (val & (1L << 31)) {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
- }
- else
+ } else {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
- port2_start = 0x20;
+ }
+ break;
+
+ case 0x1182:
+ case 0x1183:
+ pci_read_config_dword(pdev, 0x64, &val);
+ if (val & 0x10000000) {
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
+ } else {
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
+ pi.flags |= ATA_FLAG_SLAVE_POSS;
+ }
+ break;
}
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index db32d15..d89c959 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -56,6 +56,8 @@
#define DRV_VERSION "2.0"
enum {
+ K2_FLAG_NO_ATAPI_DMA = (1 << 29),
+
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
K2_SATA_TF_DATA_OFFSET = 0x00,
@@ -83,11 +85,33 @@ enum {
/* Port stride */
K2_SATA_PORT_OFFSET = 0x100,
+
+ board_svw4 = 0,
+ board_svw8 = 1,
+};
+
+static const struct k2_board_info {
+ unsigned int n_ports;
+ unsigned long port_flags;
+} k2_board_info[] = {
+ /* board_svw4 */
+ { 4, K2_FLAG_NO_ATAPI_DMA },
+
+ /* board_svw8 */
+ { 8, K2_FLAG_NO_ATAPI_DMA },
};
static u8 k2_stat_check_status(struct ata_port *ap);
+static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
+ return -1; /* ATAPI DMA not supported */
+
+ return 0;
+}
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
@@ -313,6 +337,7 @@ static const struct ata_port_operations k2_sata_ops = {
.check_status = k2_stat_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .check_atapi_dma = k2_sata_check_atapi_dma,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
.bmdma_stop = ata_bmdma_stop,
@@ -359,6 +384,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
void __iomem *mmio_base;
+ const struct k2_board_info *board_info =
+ &k2_board_info[ent->driver_data];
int pci_dev_busy = 0;
int rc;
int i;
@@ -424,7 +451,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
probe_ent->sht = &k2_sata_sht;
probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO;
+ ATA_FLAG_MMIO | board_info->port_flags;
probe_ent->port_ops = &k2_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
@@ -441,7 +468,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
* longer available. This should not be seen in any system. */
- for (i = 0; i < ent->driver_data; i++)
+ for (i = 0; i < board_info->n_ports; i++)
k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
pci_set_master(pdev);
@@ -469,11 +496,11 @@ err_out:
* controller
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, 0x0240), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0241), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0242), 8 },
- { PCI_VDEVICE(SERVERWORKS, 0x024a), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x024b), 4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
{ }
};
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 1c7f19a..8c2335c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -319,7 +319,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi[2];
-
+
ppi[0] = ppi[1] = &vt6420_port_info;
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ab27548..9356322 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -307,7 +307,7 @@ enum {
* most devices.
*/
ATA_SPINUP_WAIT = 8000,
-
+
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 95c1e74..ff9e6d3 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1621,6 +1621,7 @@
#define PCI_VENDOR_ID_ITE 0x1283
#define PCI_DEVICE_ID_ITE_8211 0x8211
#define PCI_DEVICE_ID_ITE_8212 0x8212
+#define PCI_DEVICE_ID_ITE_8213 0x8213
#define PCI_DEVICE_ID_ITE_8872 0x8872
#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/