Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64

From: Len Brown
Date: Tue Jan 02 2007 - 12:00:42 EST

Next message: Len Brown: "Re: ACPI: EC: evaluating _Q10"
Previous message: Linus Torvalds: "Re: [ARM] Regression somewhere between 2.6.19 and 2.6.19-rc1"
In reply to: Sid Boyce: "Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64"
Next in thread: Sid Boyce: "Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tuesday 02 January 2007 10:41, Sid Boyce wrote:
> Same problem with 2.6.19-rc3.

Do you mean 2.6.20-rc3 still does not work?
What was the last kernel that worked properly with no cmdline parameters?

> Apologies for the long spiel, if memory serves me correct, gzip'd
> attachments are verboten.

Bugzilla may be a good place to put more information.
If the system fails in ACPI mode, but works in non-ACPI mode,
then please file a bug here:
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI

and attach the complete dmesg -s64000 for the last working, plus
failing kernel -- along with /proc/interrupts for both, and a single
copy of lspci -vv output.

> openSUSE 10.2
> Network does not get configured with "acpi=noirq" or "acpi=off".

Do you mean it does not work when running in ACPI mode, but it does
work correctly if you boot with "acpi=noirq" or "acpi=off"?

If so, please include the dmesg -s64000 and /proc/interrupts for
the acpi=off case also.

Nothing jumps out as incorrect with the ACPI IRQ routing below.

Maybe somebody who knows about the tg3 can suggest what
the error messages mean and if they are related to interrupt
problems, or perhaps something else like IO resource issues?

-Len

> There may be something in dmesg that allows further analysis of the
> problem.
> 00:0a:e4:4e:a1:42 is the laptop MAC address.
> 00:48:54:d0:22:f0 is the firewall box
> 00:50:22:40:0F:D2 is a local box
> Some things in dmesg which look decidedly strange when compared to what
> is seen with 2.6.18.2-34, two mac addresses strung together with an
> additional :08:00. I'm guessing here, this may be normal but I haven't
> seen such before.
> Linux version 2.6.20-rc1-git7-default (root@Boycie) (gcc version 4.1.2
> 20061115 (prerelease) (SUSE Linux)) #4 SMP Wed Dec 20 01:17:23 GMT 2006
> Command line: root=/dev/hda1 vga=0x317 resume=/dev/hda2 splash=silent 3
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> BIOS-e820: 000000001fef0000 - 000000001fefb000 (ACPI data)
> BIOS-e820: 000000001fefb000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 130800) 1 entries of 3200 used
> end_pfn_map = 1048576
> DMI 2.3 present.
> ACPI: RSDP (v000 PTLTD ) @
> 0x00000000000f68c0
> ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
> 0x000000001fef5d48
> ACPI: FADT (v002 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @
> 0x000000001fefae56
> ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
> 0x000000001fefaeda
> ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
> 0x000000001fefafb0
> ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @
> 0x0000000000000000
> Scanning NUMA topology in Northbridge 24
> Number of nodes 1
> Node 0 MemBase 0000000000000000 Limit 000000001fef0000
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 130800) 1 entries of 3200 used
> NUMA: Using 63 for the hash shift.
> Using node hash shift of 63
> Bootmem setup node 0 0000000000000000-000000001fef0000
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 130800
> On node 0 totalpages: 130703
> DMA zone: 56 pages used for memmap
> DMA zone: 1183 pages reserved
> DMA zone: 2760 pages, LIFO batch:0
> DMA32 zone: 1732 pages used for memmap
> DMA32 zone: 124972 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to physical flat
> Using ACPI (MADT) for SMP configuration information
> Nosave address range: 000000000009f000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000d8000
> Nosave address range: 00000000000d8000 - 0000000000100000
> Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000)
> SMP: Allowing 1 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 49664 bytes of per cpu data
> Built 1 zonelists. Total pages: 127732
> Kernel command line: root=/dev/hda1 vga=0x317 resume=/dev/hda2
> splash=silent 3
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 16384 bytes)
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Checking aperture...
> CPU 0: aperture @ e0000000 size 256 MB
> Memory: 507156k/523200k available (1948k kernel code, 15656k reserved,
> 950k data, 324k init)
> Calibrating delay using timer specific routine.. 3591.92 BogoMIPS
> (lpj=1795961)
> Security Framework v1.0.0 initialized
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0/0 -> Node 0
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 28k freed
> ACPI: Core revision 20060707
> Using local APIC timer interrupts.
> result 12464666
> Detected 12.464 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> time.c: Detected 1794.911 MHz processor.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 4000-407f claimed by vt8235 PM
> PCI quirk: region 8100-810f claimed by vt8235 SMB
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9,
> disabled.
> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10,
> disabled.
> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *10, disabled.
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 13 devices
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
> agpgart: Detected AGP bridge 0
> agpgart: AGP aperture is 256M @ 0xe0000000
> pnp: 00:06: ioport range 0x600-0x60f has been reserved
> pnp: 00:06: ioport range 0x1c0-0x1cf has been reserved
> pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:06: ioport range 0xfe10-0xfe11 could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: 2000-2fff
> MEM window: d0100000-d01fffff
> PREFETCH window: d8000000-dfffffff
> PCI: Bus 2, cardbus bridge: 0000:00:0b.0
> IO window: 00001c00-00001cff
> IO window: 00003000-000030ff
> PREFETCH window: 30000000-31ffffff
> MEM window: 32000000-33ffffff
> PCI: Bus 6, cardbus bridge: 0000:00:0b.1
> IO window: 00003400-000034ff
> IO window: 00003800-000038ff
> PREFETCH window: 34000000-35ffffff
> MEM window: 36000000-37ffffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:0b.0 to 64
> PCI: Enabling device 0000:00:0b.1 (0000 -> 0003)
> ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:0b.1 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 16384 bind 8192)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 2885k freed
> audit: initializing netlink socket (disabled)
> audit(1166585213.510:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000180000, using
> 3072k, total 65536k
> vesafb: mode is 1024x768x16, linelength=2048, pages=41
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: PC Speaker as /class/input/input1
> Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
> input: SynPS/2 Synaptics TouchPad as /class/input/input2
> NET: Registered protocol family 1
> ACPI: (supports S0 S3 S4 S5)
> Freeing unused kernel memory: 324k freed
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ACPI: Thermal Zone [THRS] (53 C)
> ACPI: Thermal Zone [THRC] (78 C)
> VP_IDE: IDE controller at PCI slot 0000:00:11.1
> ACPI: Unable to derive IRQ for device 0000:00:11.1
> Losing some ticks... checking if CPU frequency changed.
> ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> hda: WDC WD800VE-07HDT0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
> UDMA(100)
> hda: cache flushes supported
> hda: hda1 hda2
> Probing IDE interface ide1...
> hdc: _NEC DVD_RW ND-6750A, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> Attempting manual resume
> ReiserFS: hda1: found reiserfs format "3.6" with standard journal
> ReiserFS: hda1: using ordered data mode
> ReiserFS: hda1: journal params: device hda1, size 8192, journal first
> block 18, max trans len 1024, max batch 900, max commit age 30, max
> trans age 30
> ReiserFS: hda1: checking transaction log (hda1)
> ReiserFS: hda1: Using r5 hash to sort names
> NET: Registered protocol family 23
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Yenta: CardBus bridge found at 0000:00:0b.0 [1025:0046]
> USB Universal Host Controller Interface driver v3.0
> ieee1394: Initialized config rom entry `ip1394'
> Yenta: ISA IRQ mask 0x00b8, PCI irq 17
> Socket status: 30000410
> Yenta: CardBus bridge found at 0000:00:0b.1 [1025:0046]
> Yenta: ISA IRQ mask 0x00b8, PCI irq 18
> Socket status: 30000820
> ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001020
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001040
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001060
> usb usb3: configuration #1 chosen from 1 choice
> pccard: PCMCIA card inserted into slot 0
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb 1-2: new full speed USB device using uhci_hcd and address 2
> nsc-ircc, chip->init
> nsc-ircc, Found chip at base=0x02e
> nsc-ircc, driver loaded (Dag Brattli)
> ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
> ehci_hcd 0000:00:10.3: EHCI Host Controller
> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0000800
> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 6 ports detected
> nsc_ircc_open(), can't get iobase of 0x2f8
> nsc-ircc, Found chip at base=0x02e
> nsc-ircc, driver loaded (Dag Brattli)
> nsc_ircc_open(), can't get iobase of 0x2f8
> pnp: Device 00:0a disabled.
> pccard: CardBus card inserted into slot 1
> ACPI: PCI Interrupt 0000:00:0b.2[C] -> GSI 19 (level, low) -> IRQ 19
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]
> MMIO=[d0000000-d00007ff] Max Packet=[2048] IR/IT contexts=[4/4]
> ---------------------------------------------------------------------
> tg3.c:v3.71 (December 15, 2006)
> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
> eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit)
> 10/100/1000Base-T Ethernet 00:0a:e4:4e:a1:42
> ------------------------------------------------------------------------
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0]
> TSOcap[1]
> eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
> ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> usb 1-2: device not accepting address 2, error -71
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.6
> wbsd: Copyright(c) Pierre Ossman
> mmc0: W83L51xD id 7112 at 0x820 irq 10 FIFO PnP
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae404061046b5]
> cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff
> 0xd8000-0xdffff 0xe4000-0xfffff
> cs: memory probe 0x60000000-0x60ffffff: clean.
> cs: memory probe 0xa0000000-0xa0ffffff: clean.
> pcmcia: registering new device pcmcia0.0
> usb 1-2: new full speed USB device using uhci_hcd and address 4
> pcmcia: request for exclusive IRQ could not be fulfilled.
> pcmcia: the driver needs updating to supported shared IRQ lines.
> 0.0: ttyS0 at I/O 0x3f8 (irq = 17) is a 16550A
> usb 1-2: configuration #1 chosen from 1 choice
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> Bluetooth: HCI USB driver ver 2.9
> usb 3-1: configuration #1 chosen from 1 choice
> hub 3-1:1.0: USB hub found
> hub 3-1:1.0: 4 ports detected
> usb 3-2: new low speed USB device using uhci_hcd and address 3
> usb 3-2: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hci_usb
> usb 2-1: new full speed USB device using uhci_hcd and address 2
> usb 2-1: configuration #1 chosen from 1 choice
> usb 3-1.3: new full speed USB device using uhci_hcd and address 4
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> usb 3-1.3: not running at top speed; connect to a high speed hub
> Bluetooth: HIDP (Human Interface Emulation) ver 1.1
> usb 3-1.3: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> input: Acrox USB & PS/2 Mouse as /class/input/input3
> input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:10.2-2
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> usbcore: registered new interface driver usbserial
> drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> drivers/usb/serial/usb-serial.c: USB Serial Driver core
> drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
> pl2303 2-1:1.0: pl2303 converter detected
> usb 2-1: pl2303 converter now attached to ttyUSB0
> usbcore: registered new interface driver pl2303
> drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
> SCSI subsystem initialized
> Initializing USB Mass Storage driver...
> scsi0 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 4
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM ver 1.8
> USB Mass Storage support registered.
> Bluetooth: BNEP (Ethernet Emulation) ver 1.2
> Bluetooth: BNEP filters: protocol multicast
> Adding 3931696k swap on /dev/hda2. Priority:-1 extents:1 across:3931696k
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
> dm-devel@xxxxxxxxxx
> loop: loaded (max 8 devices)
> scsi 0:0:0:0: Direct-Access Maxtor 6 Y120L0 YAR4 PQ: 0
> ANSI: 0
> usb-storage: device scan complete
> SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
> sda: Write Protect is off
> sda: Mode Sense: 03 00 00 00
> sda: assuming drive cache: write through
> SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
> sda: Write Protect is off
> sda: Mode Sense: 03 00 00 00
> sda: assuming drive cache: write through
> sda: sda1 sda2
> sd 0:0:0:0: Attached scsi disk sda
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> Adding 1550264k swap on /dev/sda2. Priority:-2 extents:1 across:1550264k
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> ACPI: AC Adapter [AC] (on-line)
> ACPI: Battery Slot [BAT0] (battery present)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Sleep Button (CM) [SLPB]
> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors
> (version 2.00.00)
> powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2
> powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
> powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12
> ttyS1: LSR safety check engaged!
> audit(1166585256.326:2): audit_pid=2996 old=0 by auid=4294967295
> PM: Writing back config space on device 0000:00:0c.0 at offset b (was
> 3ed173b, writing 461025)
> PM: Writing back config space on device 0000:00:0c.0 at offset 3 (was 0,
> writing 4010)
> PM: Writing back config space on device 0000:00:0c.0 at offset 2 (was
> 2000000, writing 2000003)
> PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was
> 2b00000, writing 2b00006)
> PM: Writing back config space on device 0000:00:0c.0 at offset 0 (was
> 3ed173b, writing 169c14e4)
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> NET: Registered protocol family 17
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=224.0.0.251 LEN=107
> TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
> SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.5 DST=224.0.0.251
> LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353
> LEN=87
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=224.0.0.251 LEN=107
> TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
> SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.5 DST=224.0.0.251
> LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353
> LEN=87
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=192.168.10.1 LEN=60
> TOS=0x00 PREC=0x00 TTL=64 ID=64687 DF PROTO=TCP SPT=14566 DPT=111
> WINDOW=5840 RES=0x00 S
> YN URGP=0 OPT (020405B40402080AFFFC4A360000000001030302)
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=224.0.0.22 LEN=40
> TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=224.0.0.251 LEN=107
> TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
> SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.5 DST=224.0.0.251
> LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353
> LEN=87
> eth0: no IPv6 routers present
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=192.168.10.1 LEN=60
> TOS=0x00 PREC=0x00 TTL=64 ID=64689 DF PROTO=TCP SPT=14566 DPT=111
> WINDOW=5840 RES=0x00 S
> YN URGP=0 OPT (020405B40402080AFFFC90860000000001030302)
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=195.188.53.175
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=247 ID=45
> 161 DF PROTO=UDP SPT=53 DPT=1025 LEN=99
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=195.188.53.175
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=247 ID=45
> 162 DF PROTO=UDP SPT=53 DPT=1027 LEN=99
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=62.31.176.39
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=251 ID=1270
> 7 DF PROTO=UDP SPT=53 DPT=1026 LEN=99
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:50:22:40:0f:d2:08:00 SRC=192.168.10.1
> DST=192.168.10.5 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=47744
> PROTO=ICMP TYPE=0 CODE=0 ID=34575 SEQ=1
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:50:22:40:0f:d2:08:00 SRC=192.168.10.1
> DST=192.168.10.5 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=47745
> PROTO=ICMP TYPE=0 CODE=0 ID=34575 SEQ=2
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=194.117.134.19
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=248 ID=56
> 11 DF PROTO=UDP SPT=53 DPT=1028 LEN=99
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:50:22:40:0f:d2:08:00 SRC=192.168.10.1
> DST=192.168.10.5 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=47746
> PROTO=ICMP TYPE=0 CODE=0 ID=34575 SEQ=3
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:50:22:40:0f:d2:08:00 SRC=192.168.10.1
> DST=192.168.10.5 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=47747
> PROTO=ICMP TYPE=0 CODE=0 ID=34575 SEQ=4
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=62.31.176.39
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=251 ID=1270
> 8 DF PROTO=UDP SPT=53 DPT=1029 LEN=99
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:50:22:40:0f:d2:08:00 SRC=192.168.10.1
> DST=192.168.10.5 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=47748
> PROTO=ICMP TYPE=0 CODE=0 ID=34575 SEQ=5
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=195.188.53.175 LEN=58
> TOS=0x00 PREC=0x00 TTL=64 ID=43443 DF PROTO=UDP SPT=1025 DPT=53 LEN=38
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=194.117.134.19
> DST=192.168.10.5 LEN=119 TOS=0x00 PREC=0x00 TTL=248 ID=56
> 13 DF PROTO=UDP SPT=53 DPT=1028 LEN=99
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=194.117.134.19 LEN=63
> TOS=0x00 PREC=0x00 TTL=64 ID=13907 DF PROTO=UDP SPT=1034 DPT=53 LEN=43
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=194.117.134.19
> DST=192.168.10.5 LEN=138 TOS=0x00 PREC=0x00 TTL=248 ID=56
> 16 DF PROTO=UDP SPT=53 DPT=1036 LEN=118
> SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.5 DST=194.117.134.19 LEN=63
> TOS=0x00 PREC=0x00 TTL=64 ID=18909 DF PROTO=UDP SPT=1036 DPT=53 LEN=43
> SFW2-INext-DROP-DEFLT IN=eth0 OUT=
> MAC=00:0a:e4:4e:a1:42:00:48:54:d0:22:f0:08:00 SRC=195.188.53.175
> DST=192.168.10.5 LEN=74 TOS=0x00 PREC=0x00 TTL=247 ID=356
> 16 DF PROTO=UDP SPT=53 DPT=1039 LEN=54
> etc.,etc.
>
> Regards
> Sid.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Len Brown: "Re: ACPI: EC: evaluating _Q10"
Previous message: Linus Torvalds: "Re: [ARM] Regression somewhere between 2.6.19 and 2.6.19-rc1"
In reply to: Sid Boyce: "Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64"
Next in thread: Sid Boyce: "Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]