Re: [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support

From: Mikael Pettersson
Date: Sun Jan 07 2007 - 17:40:20 EST


On Sat, 6 Jan 2007 21:32:03 +0100 (MET), Mikael Pettersson wrote:
>This patch adds ATAPI support for the PATA port on Promise 2037x chips.
>It depends on the common sata_promise ATAPI support patch.
>
>First-generation chips don't support ATAPI on their SATA ports, so
>the patch removes ATA_FLAG_NO_ATAPI from the 2037x common host flags,
>and adds it back via the _port_flags[] entries for the SATA ports.

Update: SATAPI works on first-generation chips, but only in PIO mode.

To verify that DMA doesn't work I also tried Promise's pdc-ultra
driver for their first-generation chips. It doesn't want to support
ATAPI without an explicit option. Enabling that option makes it
recognise ATAPI devices, but even a simple "eject" command triggers
command timeouts and eventually a kernel oops due to the NMI watchdog.
So I'm fairly sure that DMA simply doesn't work.

This patch enables ATAPI on 20319 and 2037x chips, but forces SATA
ports to always use PIO. As a side-effect, ATAPI support is now free
of any dependencies on the #promise-sata-pata branch.

Signed-off-by: Mikael Pettersson <mikpe@xxxxxxxx>

--- linux-2.6.20-rc4/drivers/ata/sata_promise.c.~1~ 2007-01-07 22:58:01.000000000 +0100
+++ linux-2.6.20-rc4/drivers/ata/sata_promise.c 2007-01-07 23:06:22.000000000 +0100
@@ -197,7 +197,7 @@ static const struct ata_port_info pdc_po
/* board_20319 */
{
.sht = &pdc_ata_sht,
- .flags = PDC_COMMON_FLAGS | ATA_FLAG_NO_ATAPI | ATA_FLAG_SATA,
+ .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
@@ -789,8 +789,14 @@ static void pdc_exec_command_mmio(struct
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
{
u8 *scsicmd = qc->scsicmd->cmnd;
+ struct ata_port *ap = qc->ap;
+ struct pdc_host_priv *hp = ap->host->private_data;
int pio = 1; /* atapi dma off by default */

+ /* First generation chips cannot use ATAPI DMA on SATA ports */
+ if (!(hp->flags & PDC_FLAG_GEN_II) && sata_scr_valid(ap))
+ return 1;
+
/* Whitelist commands that may use DMA. */
switch (scsicmd[0]) {
case WRITE_12:
@@ -996,10 +1002,6 @@ static int pdc_ata_init_one (struct pci_
probe_ent->n_ports = 2;
probe_ent->_port_flags[0] = ATA_FLAG_SATA;
probe_ent->_port_flags[1] = ATA_FLAG_SATA;
- if (board_idx == board_2037x) {
- probe_ent->_port_flags[0] |= ATA_FLAG_NO_ATAPI;
- probe_ent->_port_flags[1] |= ATA_FLAG_NO_ATAPI;
- }
break;
case board_20619:
probe_ent->n_ports = 4;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/