Re: EDAC chipkill messages

[Orion Poplawski]

Robert Hancock wrote:
> Orion Poplawski wrote:
> > Can someone please explain to me what these mean?
> >
> > EDAC k8 MC1: general bus error: participating processor(local node 
> > origin), time-out(no timeout) memory transaction type(generic read), 
> > mem or i/o(mem access), cache level(generic)
> > EDAC MC1: CE page 0xfbf6f, offset 0x4d0, grain 8, syndrome 0xc8f4, row 
> > 1, channel 0, label "": k8_edac
> > EDAC MC1: CE - no information available: k8_edac Error Overflow set
> > EDAC k8 MC1: extended error code: ECC chipkill x4 error
> >
> > Thanks!
>
> Sounds like you're having some memory ECC errors.. some Memtest86, etc. 
> runs may be in order. You may be able to figure out from this info what 
> DIMM is having the problem.

That was my assumption as well, but was hoping someone could decode the 
above information and point me to the problem chip.  I ran Memtest86 
overnight but found no problems, but don't know if it needs to run in a 
particular ECC mode.

This is a dual proc 275 system with 4 1GB DIMMs.  Guessing that MC1 is 
the controller on the second CPU.  Would row 1 be the second DIMM?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/