Re: [RFC PATCH -rt 2/2] RCU priority boosting additions to rcutorture

[Josh Triplett]

Paul E. McKenney wrote:
> On Thu, Jan 25, 2007 at 12:47:04AM -0800, Josh Triplett wrote:
>> One major item: this new test feature really needs a new module parameter to
>> enable or disable it.
> 
> CONFIG_PREEMPT_RCU_BOOST is the parameter -- if not set, then no test.
> This parameter is provided by the accompanying RCU-boost patch.

It seems useful for rcutorture to use or not use the preempting thread
independently of CONFIG_PREEMPT_RCU_BOOST.  That would bring you from two
cases to four, and the two new cases both make sense:

* CONFIG_PREEMPT_RCU_BOOST=n, but run rcutorture with the preempting thread.
  This configuration allows you to demonstrate the need for
  CONFIG_PREEMPT_RCU_BOOST, by showing what happens when you need it and don't
  have it.

* CONFIG_PREEMPT_RCU_BOOST=y, but run rcutorture without the preempting
  thread.  This configuration allows you to test with rcutorture while running
  a *real* real-time workload rather than the simple preempting thread, or
  just test basic RCU functionality.

A simple boolean module_param would work here.

At some point, we may want to add the ability to run multiple preempting
threads, but that doesn't need to happen for this patch.

>> Paul E. McKenney wrote:
>>> diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/rcutorture.c linux-2.6.20-rc4-rt1-rcubtorture/kernel/rcutorture.c
>>> --- linux-2.6.20-rc4-rt1/kernel/rcutorture.c	2007-01-09 10:59:54.000000000 -0800
>>> +++ linux-2.6.20-rc4-rt1-rcubtorture/kernel/rcutorture.c	2007-01-23 11:27:49.000000000 -0800

>>> +static int rcu_torture_preempt(void *arg)
>>> +{
>>> +	int completedstart;
>>> +	time_t gcstart;
>>> +	struct sched_param sp;
>>> +
>>> +	sp.sched_priority = MAX_RT_PRIO - 1;
>>> +	sched_setscheduler(current, SCHED_RR, &sp);
>>> +	current->flags |= PF_NOFREEZE;
>>> +
>>> +	do {
>>> +		completedstart = rcu_torture_completed();
>>> +		gcstart = xtime.tv_sec;
>>> +		while ((xtime.tv_sec - gcstart < 10) &&
>>> +		       (rcu_torture_completed() == completedstart))
>>> +			cond_resched();
>>> +		if (rcu_torture_completed() == completedstart)
>>> +			rcu_torture_preempt_errors++;
>>> +		schedule_timeout_interruptible(shuffle_interval * HZ);
>> Why call schedule_timeout_interruptible here without actually handling
>> interruptions?  So that you can send it a signal to cause the shuffle early?
> 
> It allows you to kill the process in order to get the module unload to
> happen more quickly in case someone specified an overly long interval.

I didn't actually know that you could kill a kthread from userspace. :)

That rationale makes sense.

> But now that you mention this, a simple one-second sleep is probably
> appropriate here.

OK.

>>> +	} while (!kthread_should_stop());
>>> +	return NULL;
>>> +}
>>> +
>>> +static void rcu_preempt_start(void)
>>> +{
>>> +	rcu_preeempt_task = kthread_run(rcu_torture_preempt, NULL,
>>> +					"rcu_torture_preempt");
>>> +	if (IS_ERR(rcu_preeempt_task)) {
>>> +		VERBOSE_PRINTK_ERRSTRING("Failed to create preempter");
>> This ought to include the errno value, PTR_ERR(rcu_preempt_task).
> 
> Good point -- what I should do is return this value so that
> rcu_torture_init() can return it, failing the module-load process
> and unwinding.

Even better, yes.

>>> +		rcu_preeempt_task = NULL;
>>> +	}
>>> +}
>>> +
>>> +static void rcu_preempt_end(void)
>>> +{
>>> +	if (rcu_preeempt_task != NULL) {
>> if (rcu_preempt_task) would work just as well here.
> 
> True, but was being consistent with usage elsewhere in this file.

Fair enough; don't worry about it for this patch, then.  I'll deal with that
particular style cleanup later, throughout rcutorture.

>>>  static struct rcu_torture_ops rcu_ops = {
>>>  	.init = NULL,
>>>  	.cleanup = NULL,
>>> @@ -267,7 +334,9 @@ static struct rcu_torture_ops rcu_ops = 
>>>  	.completed = rcu_torture_completed,
>>>  	.deferredfree = rcu_torture_deferred_free,
>>>  	.sync = synchronize_rcu,
>>> -	.stats = NULL,
>>> +	.preemptstart = rcu_preempt_start,
>>> +	.preemptend = rcu_preempt_end,
>>> +	.stats = rcu_preempt_stats,
>>>  	.name = "rcu"
>>>  };
>>>  
>>> @@ -306,6 +375,8 @@ static struct rcu_torture_ops rcu_sync_o
>>>  	.completed = rcu_torture_completed,
>>>  	.deferredfree = rcu_sync_torture_deferred_free,
>>>  	.sync = synchronize_rcu,
>>> +	.preemptstart = NULL,
>>> +	.preemptend = NULL,
>>>  	.stats = NULL,
>>>  	.name = "rcu_sync"
>>>  };
>> Much like other common structures such as struct file_operations, no need to
>> explicitly specify members as NULL here; any member you don't specify will get
>> a NULL value.  That avoids the need to update every use of this structure
>> whenever you add a new member used by only some of them.
> 
> Untrusting, aren't I?  ;-) 

Heh.  I have that problem as well; I always hestitate to trust the compiler to
initialize values.

> I removed all the "= NULL" entries.

Thanks.

>>> @@ -856,6 +935,8 @@ rcu_torture_cleanup(void)
>>>  		kthread_stop(stats_task);
>>>  	}
>>>  	stats_task = NULL;
>>> +	if (cur_ops->preemptend != NULL)
>> if (cur_ops->preemptend) would work as well.
> 
> True, though again there is a lot of existing "!= NULL" in this file
> and elsewhere.  Many thousands of them through the kernel.  ;-)

As before, don't worry about it for this patch then.

> I will run this through the mill and repost.

Thanks!

- Josh Triplett
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/