Re: Raid 10 question/problem [ot]

[Bill Davidsen]

Marc Perkel wrote:
> I'm a little stumped trying to set up raid 10. I set
> it up and it worked but after a reboot it forgets my
> raid setup.
>
> Created 2 raid 1 arrays in md0 and md1 and that works
> and survives a reboot.
>
> However - I created a raid 0 on /dev/md2 made up of
> /dev/md0 and /dev/md1 and it worked but it forgets it
> after I reboot. The device /dev/md2 fails to survive a
> reboot.
>
> Created the /etc/mdadm.conf file but that doesn't seem
> to have made a difference.
>
> What am I missing? Thanks in advance.

RAID-10 is not the same as RAID 0+1.

There's a linux-raid mailing list, the archives may assist in 
understanding this. Either use RAID-10 or add md2 to the mdadm.conf to 
get it started at boot. I suggest using RAID-10.

--
Bill Davidsen <davidsen@xxxxxxx>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/