Re: Linux 2.6.20-rc6 - sky2 resume breakage

[Frédéric Riss]

Le lundi 29 janvier 2007 Ã 23:57 +0100, Thomas Gleixner a Ãcrit :
> On Mon, 2007-01-29 at 23:50 +0100, FrÃdÃric Riss wrote:
> > > That's probably a userspace problem. Are you using DHCP ?
> > 
> > Yep DHCP. Is that a known issue? I never had to reconfigure with older
> > kernels.
> 
> Is dhclient running after resume ? 

The process is of course in the process list, if that's what you mean by
'running'.

> What's the output of ifconfig (before you do ifdown/up) ? 

The output is always the same modulo the transmitted packet numbers:

eth0      Link encap:Ethernet  HWaddr 00:16:CB:A2:E4:43  
          inet addr:192.168.0.101  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::216:cbff:fea2:e443/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:269 errors:0 dropped:0 overruns:0 frame:0
          TX packets:57 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:72528 (70.8 KiB)  TX bytes:7900 (7.7 KiB)
          Interrupt:17 

The RX/TX counts are reset to 0 after a resume.

> Have you checked the syslog ?

Yes of course. Nothing interesting.

Fred.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/